SSC-MWT801-S

*Customer: SPECIFICATION ITEM MODEL TOP LED DEVICE SSC-MWT801-S [Contents] 1. Features -------------------------------------------------------------- 2 2. Application -------------------------------------------------------------- 2 3. Absolute Maximum Ratings ----------------------------------------------- 3 4. Electro-optical Characteristics --------------------------------------------- 3 5. CIE Chromaticity Diagram ------------------------------------------ 4 6. Soldering Profile ------------------------------------------------------------- 6 7. Outline Dimension ------------------------------------------------- 7 8. P acking --- -------------- -------------- -------------- ----------- 7 9. Reel Packing Structure -------------------------------------------- 8 10. P recaution f or Use - ---- ------------------------- --------------- 9 11. C haracterist ic Diagram - --------------------------------------- 1 0 Drawn by Checked by Approved by SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 1/10 - 1. Features White colored SMT package. Material : InGaN/SiC Encapsulating Resin : Silicone Resin High Reliability Suitable for all SMT assembly methods ; Suitable for all soldering methods 2. Application White back-light Electric application Lightings SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 2/10 - 3. Absolute Maximum Ratings *1 Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Junction Temperature Operating Temperature Storage Temperature Symbol Pd IF IFM *2 VR TJ Topr Tstg Value 120 30 90 5 125 -40 ~ +110 -40 ~ +110 Unit mW mA mA V o C o C o C (Ta=25oC) *1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW ≤ 1msec of pulse width and D ≤ 1/10 of duty ratio. 4. Electro-Optical Characteristics Parameter Forward Voltage Reverse Current Luminous Intensity*1 Rank P Rank O Rank N Rank A Rank B Rank C Rank D Symbol VF VF VF VF IR IV IV IV 2θ 1/2 TCV Condition IF=20 mA IF=20 mA IF=20 mA IF=20 mA VR=5V IF=20 mA IF=20 mA IF=20 mA IF=20 mA IF=20 mA Min 3.7 3.3 3.0 2.7 900 700 500 Typ 120 -1.0 Max 4.0 3.7 3.3 3.0 50 1200 900 700 - (Ta=25oC) Viewing Angle *2 Temperature coefficient of VF Unit V V V V μA mcd mcd mcd deg. mV/K *1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is ±10% *2. 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity. ** Ranks of MWT801-S Rank Ane Bne Cne Dne Anf Bnf Cnf Dnf Ang Bng Cng Dng Anh Bnh Cnh Dnh VF [V] 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 IV [mcd] CIE-xy 0.30/0.30 Rank Aoe Boe Coe Doe Aof Bof Cof DoF Aog Bog Cog Dog Aoh Boh Coh Doh VF [V] 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 IV [mcd] CIE-xy 0.30/0.30 Rank Ape Bpe Cpe Dpe Apf Bpf Cpf Dpf Apg Bpg Cpg Dpg Aph Bph Cph Dph VF [V] 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 3.7~4.0 3.3~3.7 3.0~3.3 2.7~3.0 IV [mcd] CIE-xy 0.30/0.30 0.32/0.31 500~700 0.34/0.36 0.32/0.31 700~900 0.34/0.36 0.32/0.31 900~1200 0.34/0.36 0.34/0.34 0.34/0.34 0.34/0.34 [Note] All measurements were made under the standardized environment of SSC. SSC-QP-0401-06(REV.11) 5. CIE Chromaticity Diagram SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 3/10 - 0.9 0.8 0.7 505 520 515 525 530 510 535 0.6 500 CIE (y) 0.5 0.4 0.3 0.2 0.1 0.0 0.0 495 540 545 550 555 560 565 570 575 580 585 590 595 600 610 620 630 830 490 485 480 475 470 460 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 CI E(x) SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 4/10 - 0.40 0.38 0.36 0.34 g d c e a b f h CIE Coord. (Y) 0.32 0.30 0.28 0.26 0.24 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 CIE Coord. (X) Color Rank a x 0.264 0.272 0.287 0.283 e x 0.296 0.311 0.307 0.287 y 0.276 0.294 0.315 0.295 x 0.311 0.330 0.330 0.307 y 0.267 0.258 0.296 0.305 x 0.272 0.280 0.296 0.287 f y 0.294 0.318 0.339 0.315 x 0.330 0.330 0.358 0.361 b y 0.258 0.248 0.276 0.295 x 0.283 0.287 0.307 0.304 g y 0.360 0.339 0.368 0.385 c y 0.305 0.295 0.315 0.330 (IF=20mA, Ta=25℃) d x 0.307 0.330 0.330 0.304 h x 0.330 0.330 0.358 0.356 y 0.318 0.339 0.368 0.351 y 0.315 0.339 0.360 0.330 * Measurement Uncertainty of the Color Coordinates : ± 0.01 SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 5/10 - 6. Soldering Profile (1) Reflow Soldering Conditions / Profile Preliminary heat to be at maximum 210ºC for maximum 2 minutes. Soldering heat to be at maximum 240ºC for maximum 10 seconds. 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 o 0 15 30 45 60 75 90 105 120 135 150 165 180 195 (2) Lead-free solder Soldering Times [sec] Preliminary heating to be at maximum 220°C for maximum 2 minutes. Soldering heat to be at maximum 260°C for maximum 10 seconds. 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 o (3) Hand Soldering conditions Soldering Times [sec] Not more than 5 seconds @MAX 300°C, under Soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 6/10 - 7. Outline Dimension 2.8 2.2 0.15 0.8 1.9 0.8 Anode Recommended Solder Pattern 3.2 2.4 1.6 Cathode Cathode Mark 2.2 1.8 1.6 1.8 ( Tolerance: ±0.2, Unit: mm ) 8. Packing 1.75±0.1 2.0±0.05 4.0±0.1 1.55 ± 0.05 0.22±0.05 3.5±0.1 8±0.1 5° 1.0±0.1 3.1±0.1 2.22±0.1 8° 11.4 ± 0.1 180 +0 -3 2.0 ± 0.2 LABLE 13 ±0.2 3.83±0.1 9.0 ± 0.3 30° 10 22 60 ( Tolerance: ±0.2, Unit: mm ) (1) Quantity : 2000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10º to the carrier tape (4) Package : Part No., Manufacturing data Code No. and quantity to be indicated on a damp proof Package SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 7/10 - 9. Reel Packing Structure Reel RANK: QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : XXX XXXXXX SEOUL SEM ICONDUCTOR CO., LTD. HUM IDITY INDICATOR DESI PAK Aluminum Vinyl Bag RANK: QUANTITY : XXXX LOT NUM BER : XXXXXXXXXX PART NUMBER : XXX XXXXXX SEOUL SEM ICON DUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 142 1 SIDE RANK: QUANTITY : XXXX LOT NUM BER : XXXXXXXXXX PART NUMBER : XXX TOP LED RoHS c 1 XXXXXX b SEOUL SEM ICON DUCTOR CO., LTD. a SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 8/10 - 10. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 60%RH * The LED is classified to Class 3 by JEDEC (J-STD-020A and J-STD-033). (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened and mounted the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 30% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moisture-proof packing. (12) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice ent without notice. SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 9/10 - 11. Characteristic Diagram Forward Current vs Forward Voltage (TA=25oC) 14 0 12 0 Intensity vs Forward Current (TA=25oC) Relative Luminous Intensity [%] Forward Current IF [mA] 10 10 0 80 60 40 20 0 0 0. 1 2. 6 2 .8 3. 0 3 .2 3 .4 3 .6 3. 8 4 .0 4. 2 4 .4 Forward Voltage VF [V] Forward Current IF [mA] 10 20 30 40 Forward Current Derating Curve 25 Radiation (TA=25oC) 20 0 -30 30 Forward Current IF [mA] 15 TA 10 -60 60 5 0 -60 -40 Ambient Temperature -20 0 20 40 TA [oC ] 60 80 100 120 -90 90 Luminous Intensity vs. Ambient Temperature 1.0 Color Coordinate Variation By Time 0.336 0.336 IF=20m A B IF=20mA Ta=25°C 0.332 x coordinate y coordinate 0.332 0.328 0.324 0.320 0.316 0.312 0.308 1200 Relative Optical Intensity 0.8 CIE (x) Coordinate 0.328 0.324 0.320 0.316 0.312 0.6 0.4 0.2 0.0 20 40 60 80 100 12 0 0.308 -200 0 200 400 600 800 1000 Am bient T e m peratu re Measurement Time [hr] SSC-QP-0401-06(REV.11) SEOUL SEMICONDUCTOR CO., LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-MWT801-S - 10/10 - CIE (y) Coordinate