SSC-PTR202

*Customer: SPECIFICATION ITEM MODEL PART NO. Photo Transistor SSC-PTR202-IX0 [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Soldering profile 5. Outline dimension 6. Packing 7. Reel packing structure 8. Precaution for use Drawn by Checked by Approved by SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-PTR202 Seoul Semiconductor - 1/6 - 1. Features Material : Si Package : 3.0×1.5×1.4 mm Inner Lens type Peak Sensitive Wavelength : 800 nm Seoul Semiconductor 2. Absolute Maximum Ratings Parameter Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Collector Power Dissipation Operating Temperature Storage Temperature Symbol VCEO VECO IC PC Topr Tstg Rating 30 5 30 100 -40 ~ 85 -40 ~ 100 (Ta=25℃) Unit V V ㎃ ㎽ ℃ ℃ 3. Electro-Optical Characteristics Parameter Light Current Collector dark current Saturated voltage between collector & emitter Peak sensitive wave length Spectral efficiency Response (Rise time) Response (Fall time) Symbol Ic ICEO VCE(Sat) λp λ Tr Tf Condition VCE=10V, E=1000 lux VCE=5V IC=2㎃ E=1000 lux VCE=5V, Ic=1㎃, RC =1000Ω (Ta=25℃) Min 1.0 Typ 2.5 Max 100 0.4 350 800 15 15 1100 Unit ㎃ ㎁ V ㎚ ㎚ ㎲ ㎲ SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-PTR202 - 2/6 - 4. Soldering Profile (1) Reflow Soldering Conditions / Profile Preliminary heating to be at 150 max. for 2 minutes max. Soldering heat to be at 240 max. for 5 seconds max. (2) Reflow Soldering Conditions / Profile Preliminary heating to be at 150℃max. for 2 minutes max. Soldering heat to be at 255℃(+5/-0)max for 20 seconds max. LED Surface temperature °C Operation heating 255 (+5) (3) Hand Soldering conditions Not more than 3 seconds @MAX280 , under Soldering iron. [Note] In case the soldered products are reused in soldering process, we don’t guarantee the products. SSC-QP-0401-06(REV.0) LED Surface temperature °C Operation heating 240 150 ~ 120 0 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. 60 to 120 sec. 5sec. max 150 ~ 120 0 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. 60 to 120 sec. 10 to 20 sec. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-PTR202 - 3/6 - 5. Outline Dimension 1.4 1.5 Mask 0.6 1 Collector 1 0.5 1.5 Tolerance: ±0.1, Unit: mm 1.5 1.6 3 2 2 2 Emitter 1.5 2 Lens 6. Packing 0.6 Tolerance: ±0.2, Unit: mm (1) Quantity: 3,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at 10˚ angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-PTR202 SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/6 - 5 7. Reel Packing Structure Reel PART NO. : ########## PO NUMBER : ######## QUANTITY : 3,000 LOT NUMBER : ########## SSC PART NUMBER : SSC-PTR202 Aluminum Vinyl Bag PART NO. : ########## PO NUMBER : ######## QUANTITY : 3,000 LOT NUMBER : ########## SSC PART NUMBER : SSC-PTR202 Outer Box *Material: Paper(SW3B(B)) a 7inch 245 c CHIP LED TYPE SIZE(mm) b 220 c 142 CHIP LED b a SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-PTR202 - 5/6 - 8. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5 ~30 Humidity : 60%HR max. (2) Attention after opened However Photo Transistor is correspond SMD, when Photo Transistor be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40℃ Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) Photo Transistors must be stored to maintain a clean atmosphere. If the Photo Transistors are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The Photo Transistors must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-PTR202 - 6/6 -