74AHC14XS14G/TR

74AHC14 Hex Inverter with Schmitt Trigger Inputs GENERAL DESCRIPTION FEATURES The 74AHC14 is a hex inverter with Schmitt trigger ● Wide Operating Voltage Range: 2.0V to 5.5V inputs. The device is designed for 2.0V to 5.5V VCC ● Inputs Accept Voltages Higher than the Supply Voltage operation. This device has the capability to convert the slowly changing input signals into clearly defined, jitter-free output signals. The device performs the Boolean �. function Y = A 3 5 9 11 13 1A 2A 1Y 2Y 3A 3Y 4A 4Y 5A 5Y 6A 6Y SG Micro Corp www.sg-micro.com ● All Inputs with Schmitt Trigger Actions ● -40℃ to +125℃ Operating Temperature Range ● Available in Green SOIC-14 and TSSOP-14 Packages FUNCTION TABLE LOGIC DIAGRAM 1 ● +8mA/-8mA Output Current 2 4 6 INPUT OUTPUT nA nY L H H L � Y= A H = High Voltage Level L = Low Voltage Level 8 10 12 JULY 2022 – REV. A. 2 74AHC14 Hex Inverting with Schmitt Trigger Inputs PACKAGE/ORDERING INFORMATION MODEL SPECIFIED PACKAGE TEMPERATURE DESCRIPTION RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SOIC-14 -40℃ to +125℃ 74AHC14XS14G/TR 74AHC14XS14 XXXXX Tape and Reel, 2500 TSSOP-14 -40℃ to +125℃ 74AHC14XTS14G/TR 74AHC14 XTS14 XXXXX Tape and Reel, 4000 74AHC14 MARKING INFORMATION NOTE: XXXXX = Date Code, Trace Code and Vendor Code. XXXXX Vendor Code Trace Code Date Code - Year Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS (1) Supply Voltage Range, VCC ................................. -0.5V to 7V (2) Input Voltage Range, VI ................................... -0.5V to 7V (2) Output Voltage Range, VO .................. -0.5V to Vcc + 0.5V Input Clamping Current, IIK (VI < -0.5V) ........................ -20mA Output Clamping Current, IOK (VO < -0.5V or VO > (VCC + 0.5V)) .................................................................................. ±20mA Output Current, IO High-State .................................................................. -25mA Low-State .................................................................... 25mA Supply Current, ICC ....................................................... 75mA Ground Current, IGND.................................................... -75mA (3) Junction Temperature .............................................+150℃ Storage Temperature Range ....................... -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 6000V CDM ............................................................................ 1000V RECOMMENDED OPERATING CONDITIONS Supply Voltage Range, VCC ................................2.0V to 5.5V Input Voltage Range, VI .........................................0V to 5.5V Output Voltage Range, VO ...................................... 0V to VCC High-Level Output Current, IOH ..................................... -8mA Low-Level Output Current, IOL......................................... 8mA Input Transition Rise and Fall Rate, Δt/ΔV....... 10ns/V (MAX) Operating Temperature Range .................... -40℃ to +125℃ OVERSTRESS CAUTION 1. Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. 2. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. 3. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. SG Micro Corp www.sg-micro.com JULY 2022 2 74AHC14 Hex Inverting with Schmitt Trigger Inputs PIN CONFIGURATIONS (TOP VIEW) 1A 1 14 VCC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y SOIC-14/TSSOP-14 PIN DESCRIPTION PIN NAME 1, 3, 5, 9, 11, 13 1A, 2A, 3A, 4A, 5A, 6A Data Inputs. 2, 4, 6, 8, 10, 12 1Y, 2Y, 3Y, 4Y, 5Y, 6Y Data Outputs. 7 GND Ground. 14 VCC Supply Voltage. SG Micro Corp www.sg-micro.com FUNCTION JULY 2022 3 74AHC14 Hex Inverting with Schmitt Trigger Inputs ELECTRICAL CHARACTERISTICS (Full = -40℃ to +125℃, all typical values are measured at TA = +25℃, unless otherwise noted.) PARAMETER High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Supply Current SYMBOL VOH VOL CONDITIONS VI = VT+ or VT- VI = VT+ or VT- TEMP MIN TYP MAX IO = -50μA, VCC = 2.0V Full 1.95 1.995 IO = -50μA, VCC = 3.0V Full 2.95 2.995 IO = -50μA, VCC = 4.5V Full 4.45 4.495 IO = -4mA, VCC = 3.0V Full 2.6 2.85 IO = -8mA, VCC = 4.5V Full 4 4.25 IO = 50μA, VCC = 2.0V Full 0.005 0.05 IO = 50μA, VCC = 3.0V Full 0.005 0.05 IO = 50μA, VCC = 4.5V Full 0.005 0.05 IO = 4mA, VCC = 3.0V Full 0.15 0.4 IO = 8mA, VCC = 4.5V UNITS V V Full 0.25 0.5 II VI = 5.5V or GND, VCC = 0V to 5.5V Full 0.02 2 μA ICC VI = VCC or GND, VCC = 5.5V, IO = 0A Full 0.02 10 μA +25℃ 5 pF +25℃ 5 pF Input Capacitance CI Output Capacitance CO DYNAMIC CHARACTERISTICS (For test circuit, see Figure 2. All typical values are measured at TA = +25℃ and VCC = 3V, 3.6V, 4.5V and 5.5V respectively, unless otherwise noted.) PARAMETER Propagation Delay (2) Power Dissipation Capacitance (3) SYMBOL tPD CPD nA to nY, see Figure 3 CONDITIONS TEMP MIN (1) TYP MAX (1) VCC = 3.0V to 3.6V, CL = 15pF +25℃ 1 8 11 VCC = 3.0V to 3.6V, CL = 50pF +25℃ 1 9 14 VCC = 4.5V to 5.5V, CL = 15pF +25℃ 1 7 9 VCC = 4.5V to 5.5V, CL = 50pF +25℃ 1 8 11 fi = 1MHz, VI = GND to VCC +25℃ 12 UNITS ns pF NOTES: 1. Specified by design and characterization; not production tested. 2. tPD is the same as tPLH and tPHL. 3. CPD is used to determine the dynamic power dissipation (PD in μW). 2 2 PD = CPD × VCC × fi × N + Σ(CL × VCC × fo) where: fi = Input frequency in MHz. fo = Output frequency in MHz. CL = Output load capacitance in pF. VCC = Supply voltage in Volts. N = Number of inputs switching. 2 Σ(CL × VCC × fo) = Sum of the outputs. SG Micro Corp www.sg-micro.com JULY 2022 4 74AHC14 Hex Inverting with Schmitt Trigger Inputs TRANSFER CHARACTERISTICS (Full = -40℃ to +125℃, all typical values are measured at TA = +25℃, unless otherwise noted.) PARAMETER SYMBOL Positive-Going Threshold Voltage VT+ Negative-Going Threshold Voltage VT- Hysteresis Voltage 1.4 TEMP MIN TYP MAX VCC = 3.0V Full 1.2 1.85 2.2 VCC = 4.5V Full 1.75 2.65 3.15 VCC = 5.5V Full 2.15 3.15 3.85 VCC = 3.0V Full 0.9 1.25 1.9 VCC = 4.5V Full 1.35 1.9 2.75 VCC = 5.5V Full 1.65 2.3 3.35 VCC = 3.0V Full 0.25 0.6 1.2 VCC = 4.5V Full 0.35 0.75 1.4 VCC = 5.5V Full 0.45 0.85 1.6 3.5 VCC = 3V 1.2 2.5 0.8 2.0 ICC (mA) 1.0 0.6 V V V 1.5 0.4 1.0 0.2 0.5 0.0 UNITS VCC = 4.5V 3.0 0.0 0 0.5 1 1.5 2 2.5 3 3.5 0 0.5 1 1.5 VIN (V) 2 2.5 3 3.5 4 4.5 5 VIN (V) 6 VCC = 5.5V 5 4 ICC (mA) ICC (mA) VH CONDITIONS 3 2 1 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VIN (V) Figure 1. Typical Transfer Characteristics SG Micro Corp www.sg-micro.com JULY 2022 5 74AHC14 Hex Inverting with Schmitt Trigger Inputs TEST CIRCUIT tW VI 90% VM VM 10% GND tF tR tR tF VI 90% VM VM 10% GND tW VCC VI VO 74AHC14 CL RT Test conditions are given in Table 1. Definitions for test circuit: CL: Load capacitance (includes jig and probe). RT: Termination resistance (equals to output impedance ZO of the pulse generator). Figure 2. Test Circuit for Measuring Switching Times Table 1. Test Conditions SUPPLY VOLTAGE INPUT LOAD VCC VI tR, tF CL 2.0V to 5.5V VCC ≤ 3.0ns 50pF, 15pF SG Micro Corp www.sg-micro.com JULY 2022 6 74AHC14 Hex Inverting with Schmitt Trigger Inputs WAVEFORMS VI nA Input VM VM GND tPLH tPHL VOH VM VM nY Output VOL Test conditions are given in Table 1. Measurement points are given in Table 2. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. Figure 3. Input nA to Output nY Propagation Delays Table 2. Measurement Points SUPPLY VOLTAGE INPUT VCC VI 2.0V to 5.5V VCC OUTPUT VM (1) 0.5 × VCC VM 0.5 × VCC NOTE: 1. The measurement points should be VIH or VIL when the input rising or falling time exceeds 3.0ns. REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. JULY 2022 ‒ REV.A.1 to REV.A.2 Page Added TSSOP-14 package................................................................................................................................................................................ All FEBRUARY 2022 ‒ REV.A to REV.A.1 Page Updated VO in Absolute Maximum Ratings section ............................................................................................................................................. 2 Added IOH, IOL and Δt/ΔV in Recommended Operating Conditions section ........................................................................................................... 2 Complemented Table 1 and Table 2 ................................................................................................................................................................ 6, 7 Changes from Original (APRIL 2021) to REV.A Page Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com JULY 2022 7 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOIC-14 D E 5.2 E1 2.2 e b 0.6 1.27 RECOMMENDED LAND PATTERN (Unit: mm) L1 R1 R A3 A A2 h θ A1 Symbol h L Dimensions In Millimeters MIN MAX L2 Dimensions In Inches MIN MAX A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 1.65 0.049 0.065 A3 0.55 0.75 0.022 0.030 b 0.36 0.49 0.014 0.019 D 8.53 8.73 0.336 0.344 E 5.80 6.20 0.228 0.244 E1 3.80 4.00 0.150 e L 1.27 BSC 0.45 L1 0.80 0.018 1.04 REF L2 0.157 0.050 BSC 0.032 0.040 REF 0.25 BSC 0.01 BSC R 0.07 0.003 R1 0.07 0.003 h 0.30 0.50 0.012 0.020 θ 0° 8° 0° 8° NOTES: 1. Body dimensions do not include mode flash or protrusion. 2. This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00011.001 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS TSSOP-14 D E1 E 5.94 1.78 b e 0.42 0.65 RECOMMENDED LAND PATTERN (Unit: mm) L ccc C A SEATING PLANE A2 θ A1 C Symbol c H Dimensions In Millimeters MIN MOD MAX A - - 1.200 A1 0.050 - 0.150 A2 0.800 - 1.050 b 0.190 - 0.300 c 0.090 - 0.200 D 4.860 - 5.100 E 4.300 - 4.500 E1 6.200 - 6.600 e L 0.650 BSC 0.450 H θ - 0.750 0.250 TYP 0° ccc - 8° 0.100 NOTES: 1. This drawing is subject to change without notice. 2. The dimensions do not include mold flashes, protrusions or gate burrs. 3. Reference JEDEC MO-153. SG Micro Corp www.sg-micro.com TX00019.002 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOIC-14 13″ 16.4 6.60 9.30 2.10 4.0 8.0 2.0 16.0 Q1 TSSOP-14 13″ 12.4 6.80 5.40 1.50 4.0 8.0 2.0 12.0 Q1 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 13″ 386 280 370 5 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000