SGM2033-2.8XUDH4G/TR

SGM2033 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits GENERAL DESCRIPTION FEATURES The SGM2033 series are ultra low noise linear  Operating Input Voltage Range: 1.8V to 5.5V regulators capable of supplying 250mA output current.  Available in Fixed Voltage Option: 1.2V to 5.0V Designed to meet the requirements of RF and analog  Output Short to GND Protection circuits, the SGM2033 device provides ultra low noise,  Output Current Limit: 500mA (TYP) high PSRR, low quiescent current and very good  Over-Temperature Protection: +165℃ load/line transients. The device is designed to work  Fast Load Transient Response with a 1μF input and a 1μF output ceramic capacitors.  Ultra Low Quiescent Current: 13.5μA (TYP) The SGM2033 is available in Green SOT-23-5 and UTDFN-1×1-4AL packages. It operates over an ambient temperature range of -40℃ to +125℃.  Shutdown Current: 0.1μA (TYP)  Stable with a 1μF Small Case Size Ceramic Capacitor  -40℃ to +125℃ Operating Temperature Range  Available in Green SOT-23-5 and UTDFN-1×1-4AL APPLICATIONS Packages Battery-Powered Equipment Wireless LAN Devices Smart-phones and Tablets Cameras and Camcorders TYPICAL APPLICATION VIN CIN 1μF SGM2033 ON EN OFF VOUT OUT IN GND COUT 1μF Figure 1. Typical Application Circuit SG Micro Corp www.sg-micro.com NOVEMBER 2018 – REV. A 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 PACKAGE/ORDERING INFORMATION MODEL PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SGM2033-1.2 SOT-23-5 -40℃ to +125℃ SGM2033-1.2XN5G/TR GP1XX Tape and Reel, 3000 SGM2033-1.8 SOT-23-5 -40℃ to +125℃ SGM2033-1.8XN5G/TR GTFXX Tape and Reel, 3000 SGM2033-2.5 SOT-23-5 -40℃ to +125℃ SGM2033-2.5XN5G/TR GU0XX Tape and Reel, 3000 SGM2033-2.8 SOT-23-5 -40℃ to +125℃ SGM2033-2.8XN5G/TR GU1XX Tape and Reel, 3000 SGM2033-2.85 SOT-23-5 -40℃ to +125℃ SGM2033-2.85XN5G/TR GU2XX Tape and Reel, 3000 SGM2033-2.9 SOT-23-5 -40℃ to +125℃ SGM2033-2.9XN5G/TR GU3XX Tape and Reel, 3000 SGM2033-2.95 SOT-23-5 -40℃ to +125℃ SGM2033-2.95XN5G/TR GU4XX Tape and Reel, 3000 SGM2033-3.0 SOT-23-5 -40℃ to +125℃ SGM2033-3.0XN5G/TR GU5XX Tape and Reel, 3000 SGM2033-3.3 SOT-23-5 -40℃ to +125℃ SGM2033-3.3XN5G/TR GU6XX Tape and Reel, 3000 SGM2033-4.2 SOT-23-5 -40℃ to +125℃ SGM2033-4.2XN5G/TR GP5XX Tape and Reel, 3000 SGM2033-5.0 SOT-23-5 -40℃ to +125℃ SGM2033-5.0XN5G/TR GU7XX Tape and Reel, 3000 SGM2033-1.2 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-1.2XUDH4G/TR 63X Tape and Reel, 10000 SGM2033-1.8 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-1.8XUDH4G/TR U8X Tape and Reel, 10000 SGM2033-2.5 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-2.5XUDH4G/TR U9X Tape and Reel, 10000 SGM2033-2.8 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-2.8XUDH4G/TR UAX Tape and Reel, 10000 SGM2033-2.85 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-2.85XUDH4G/TR UBX Tape and Reel, 10000 SGM2033-2.9 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-2.9XUDH4G/TR UCX Tape and Reel, 10000 SGM2033-2.95 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-2.95XUDH4G/TR UDX Tape and Reel, 10000 SGM2033-3.0 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-3.0XUDH4G/TR UEX Tape and Reel, 10000 SGM2033-3.3 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-3.3XUDH4G/TR UFX Tape and Reel, 10000 SGM2033-4.2 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-4.2XUDH4G/TR 61X Tape and Reel, 10000 SGM2033-5.0 UTDFN-1×1-4AL -40℃ to +125℃ SGM2033-5.0XUDH4G/TR V0X Tape and Reel, 10000 MARKING INFORMATION NOTE: XX = Date Code. X = Date Code. SOT-23-5 UTDFN-1×1-4AL YY X YYY X X Date Code - Week Date Code - Year Serial Number Date Code - Quarter Serial Number Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. SG Micro Corp www.sg-micro.com NOVEMBER 2018 2 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 ABSOLUTE MAXIMUM RATINGS IN to GND ............................................................ -0.3V to 6V OUT to GND .......................................... -0.3V to (VIN + 0.3V) EN to GND ........................................................... -0.3V to 6V Package Thermal Resistance SOT-23-5, θJA .......................................................... 207℃/W UTDFN-1×1-4AL, θJA ............................................... 238℃/W Junction Temperature .................................................+150℃ Storage Temperature Range ....................... -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 8000V MM ................................................................................. 400V CDM ............................................................................ 1000V RECOMMENDED OPERATING CONDITIONS Input Voltage Range ...........................................1.8V to 5.5V Operating Temperature Range .................... -40℃ to +125℃ OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. PIN CONFIGURATIONS (TOP VIEW) IN 1 GND 2 EN 3 (TOP VIEW) 5 OUT 4 NC SOT-23-5 IN EN 4 3 1 2 OUT GND UTDFN-1×1-4AL PIN DESCRIPTION PIN NAME FUNCTION SOT-23-5 UTDFN1×1-4AL 1 4 IN 2 2 GND 3 3 EN Chip Enable. Applying VEN ≤ 0.4V disables the regulator; pulling VEN ≥ 1.5V enables the LDO. 4 – NC Not Connected. 5 1 OUT SG Micro Corp www.sg-micro.com Input Voltage Supply Pin. Common Ground Connection. Regulated Output Voltage. It is recommended to use output capacitor with effective capacitance in the range of 1μF to 10μF. NOVEMBER 2018 3 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 ELECTRICAL CHARACTERISTICS (VIN = VOUT(NOM) + 1.0V, IOUT = 0.1mA, VEN = VIN, CIN = COUT = 1μF, Full = -40℃ to +125℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER SYMBOL Operating Input Voltage Range VIN Output Voltage Accuracy VOUT CONDITIONS VIN = (VOUT(NOM) + 1.0V) to 5.5V Line Regulation ∆VOUT ∆VIN × VOUT VIN = (VOUT(NOM) + 1.0V) to 5.5V Load Regulation ΔVOUT IOUT = 0.1mA to 250mA Dropout Voltage (1) Dropout Voltage (1) VDROP VDROP IOUT = 250mA, SOT-23-5 IOUT = 250mA, UTDFN-1×1-4AL ILIM Short Circuit Current ISC VOUT = 0V Quiescent Current IQ No load Shutdown Current ISHDN MIN MAX UNITS Full 1.8 TYP 5.5 V +25℃ 1 1 Full 1.5 1.5 VOUT(NOM) ≤ 3.3V Full 0.01 0.12 VOUT(NOM) = 4.2V Full 0.04 0.36 VOUT(NOM) ≤ 1.8V +25℃ 3 VOUT(NOM) > 1.8V +25℃ 7 1.8V ≤ VOUT(NOM) < 2.8V Full 175 265 2.8V ≤ VOUT(NOM) < 3.3V Full 120 200 3.3V ≤ VOUT(NOM) < 4.2V Full 105 180 4.2V ≤ VOUT(NOM) ≤ 5.0V Full 95 155 1.8V ≤ VOUT(NOM) < 2.8V Full 145 225 2.8V ≤ VOUT(NOM) < 3.3V Full 85 145 3.3V ≤ VOUT(NOM) < 4.2V Full 72 125 62 110 4.2V ≤ VOUT(NOM) ≤ 5.0V Output Current Limit (2) TEMP Full +25℃ VEN = 0V, VIN = 5.5V 260 220 mA Full 13.5 22 +25℃ 0.1 1 Full 2.5 EN input voltage high Full Full EN Pull-Down Current IEN VEN = 5.5V Full 0.2 Turn-On Time tON From assertion of VEN to VOUT = 90% VOUT(NOM) Output Voltage Noise en IOUT = 20mA f = 10Hz to 100kHz VOUT = 2.8V mV +25℃ EN input voltage low PSRR mV mA VIL Power Supply Rejection Ratio %/V 500 VIH EN Pin Threshold Voltage % 1.5 0.4 1 µA µA V µA +25℃ 120 f = 100Hz +25℃ 84 f = 1kHz +25℃ 94 f = 10kHz +25℃ 73 f = 100kHz +25℃ 33 IOUT = 1mA +25℃ 26 IOUT = 250mA +25℃ 20 +25℃ 220 Ω dB µVRMS Output Discharge Resistance RDISCH Thermal Shutdown Temperature TSHDN 165 ℃ ΔTSHDN 20 ℃ Thermal Shutdown Hysteresis VEN ≤ 0.4V, VIN = 5.0V µs NOTES: 1. Dropout voltage is characterized when VOUT falls 5% below VOUT(NOM). 2. Output current limit is characterized when VOUT falls 200mV below VOUT(NOM). SG Micro Corp www.sg-micro.com NOVEMBER 2018 4 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 TYPICAL PERFORMANCE CHARACTERISTICS TA = +25℃, VIN = VOUT(NOM) + 1.0V, VEN = VIN, CIN = COUT = 1μF, unless otherwise noted. Line Transient Response Line Transient Response 4.8V 3.3V 3.8V VIN 500mV/div 50mV/div VOUT = 1.8V, IOUT = 10mA 50mV/div VOUT 500mV/div 2.3V VIN VOUT VOUT = 3.3V, IOUT = 10mA Time (100μs/div) Time (100μs/div) Load Transient Response Load Transient Response 100mA/div 100mA/div IOUT IOUT 50mV/div 50mV/div VOUT VOUT VOUT = 3.3V, IOUT = 0.1mA to 250mA VOUT = 1.8V, IOUT = 0.1mA to 250mA Time (10μs/div) Time (5μs/div) Load Transient Response Load Transient Response IOUT IOUT Time (10μs/div) SG Micro Corp www.sg-micro.com 50mV/div 50mV/div VOUT = 1.8V, IOUT = 250mA to 0.1mA 100mA/div 100mA/div VOUT VOUT VOUT = 3.3V, IOUT = 250mA to 0.1mA Time (5μs/div) NOVEMBER 2018 5 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = VOUT(NOM) + 1.0V, VEN = VIN, CIN = COUT = 1μF, unless otherwise noted. Turn-On with EN Pin Turn-On with EN Pin 2V/div 2V/div VEN VEN 1V/div 1V/div VOUT VOUT VOUT = 1.8V, COUT = 1μF, IOUT = 250mA VOUT = 1.8V, COUT = 1μF, IOUT = 10mA Time (200μs/div) Time (200μs/div) Turn-On with EN Pin Turn-On with EN Pin 2V/div 2V/div VEN VEN 2V/div 2V/div VOUT VOUT VOUT = 3.3V, COUT = 1μF, IOUT = 250mA VOUT = 3.3V, COUT = 1μF, IOUT = 10mA Time (100μs/div) Time (100μs/div) Turn-Off with EN Pin Turn-Off with EN Pin VEN VEN 2V/div 2V/div VOUT VOUT Time (1ms/div) SG Micro Corp www.sg-micro.com 1V/div 1V/div VOUT = 1.8V, COUT = 1μF, IOUT = 0mA VOUT = 1.8V, COUT = 4.7μF, IOUT = 0mA Time (5ms/div) NOVEMBER 2018 6 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = VOUT(NOM) + 1.0V, VEN = VIN, CIN = COUT = 1μF, unless otherwise noted. Turn-Off with EN Pin Turn-Off with EN Pin VEN VEN 2V/div 2V/div VOUT VOUT 2V/div 2V/div VOUT = 3.3V, COUT = 4.7μF, IOUT = 0mA VOUT = 3.3V, COUT = 1μF, IOUT = 0mA Time (400μs/div) Time (500μs/div) Power-Up Waveform Power-Up Waveform 2V/div 1V/div 2V/div VIN 1V/div VIN VOUT VOUT VOUT = 1.8V, IOUT = 1mA VOUT = 3.3V, IOUT = 1mA Time (100μs/div) Output Noise Density vs. Frequency 10 VOUT = 1.8V, IOUT = 1mA Output Noise Density (μV√Hz) Output Noise Density (μV√Hz) 10 Time (100μs/div) 1 0.1 0.01 0.01 0.1 1 Frequency (kHz) SG Micro Corp www.sg-micro.com 10 100 Output Noise Density vs. Frequency VOUT = 3.3V, IOUT = 1mA 1 0.1 0.01 0.01 0.1 1 10 100 Frequency (kHz) NOVEMBER 2018 7 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = VOUT(NOM) + 1.0V, VEN = VIN, CIN = COUT = 1μF, unless otherwise noted. Power Supply Rejection Ratio vs. Frequency Power Supply Rejection Ratio vs. Frequency 110 80 IOUT = 1mA 60 IOUT = 20mA 40 20 ∆VRIP = 0.2VP-P, VOUT = 1.8V 0 0.01 0.1 1 10 100 Power Supply Rejection Ratio (dB) Power Supply Rejection Ratio (dB) 100 90 70 IOUT = 1mA 50 IOUT = 20mA 30 ∆VRIP = 0.2VP-P, VOUT = 3.3V 10 0.01 1000 0.1 Frequency (kHz) Dropout Voltage vs. Output Current 100 Dropout Voltage (mV) Dropout Voltage (mV) 1000 Dropout Voltage vs. Output Current 150 100 50 VOUT = 1.8V 0 25 50 80 60 40 20 0 75 100 125 150 175 200 225 250 VOUT = 3.3V 0 25 50 Output Current (mA) 75 100 125 150 175 200 225 250 Output Current (mA) Output Voltage vs. Output Current Output Voltage vs. Output Current 2.1 3.5 1.8 3.0 1.5 2.5 Output Voltage (V) Output Voltage (V) 100 120 200 1.2 0.9 0.6 0.3 0.0 10 Frequency (kHz) 250 0 1 2.0 1.5 1.0 0.5 VOUT = 1.8V 0 100 200 300 400 Output Current (mA) SG Micro Corp www.sg-micro.com 500 600 0.0 VOUT = 3.3V 0 100 200 300 400 500 600 Output Current (mA) NOVEMBER 2018 8 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = VOUT(NOM) + 1.0V, VEN = VIN, CIN = COUT = 1μF, unless otherwise noted. Ground Pin Current vs. Output Current 1.4 1.2 Ground Pin Current (mA) Ground Pin Current (mA) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Ground Pin Current vs. Output Current 1.4 1.0 0.8 0.6 0.4 0.2 VOUT = 1.8V 0 25 50 0.0 75 100 125 150 175 200 225 250 VOUT = 3.3V 0 25 50 75 100 125 150 175 200 225 250 Output Current (mA) 1.798 Output Current (mA) Output Voltage vs. Temperature 3.002 3.000 1.796 Output Voltage (V) Output Voltage (V) 1.797 1.795 1.794 1.793 1.792 1.791 1.790 Output Voltage vs. Temperature 5 2.996 2.994 2.992 2.990 VOUT = 1.8V, IOUT = 1mA -40 -25 -10 2.998 2.988 20 35 50 65 80 95 110 125 VOUT = 3.3V, IOUT = 1mA -40 -25 -10 5 Temperature (℃) Temperature (℃) Dropout Voltage vs. Temperature 160 200 140 Output Voltage (V) Output Voltage (V) Dropout Voltage vs. Temperature 220 180 160 140 120 20 35 50 65 80 95 110 125 120 100 80 VOUT = 1.8V, IOUT = 250mA -40 -25 -10 5 20 35 50 65 80 95 110 125 Temperature (℃) SG Micro Corp www.sg-micro.com 60 VOUT = 3.3V, IOUT = 250mA -40 -25 -10 5 20 35 50 65 80 95 110 125 Temperature (℃) NOVEMBER 2018 9 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits SGM2033 FUNCTIONAL BLOCK DIAGRAM IN Enable Logic EN Bandgap Reference SubRegulator Thermal Shutdown - MOSFET Driver with Current Limit + OUT Active Discharge EN GND Figure 2. Block Diagram SG Micro Corp www.sg-micro.com NOVEMBER 2018 10 SGM2033 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits APPLICATION INFORMATION The SGM2033 series are ultra low noise 250mA low dropout regulators designed to meet the requirements of RF applications and high performance analog circuits. The SGM2033 device provides very high PSRR and excellent dynamic response. In connection with low quiescent current this device is well suitable for battery powered application such as cell phones, tablets and others. The SGM2033 is fully protected in case of current overload, output short circuit and overheating. Input Capacitor Selection (CIN) Input capacitor connected as close as possible is necessary for ensuring device stability. The X7R or X5R capacitor should be used for reliable performance over temperature range. The value of the input capacitor should be 1μF or greater to ensure the best dynamic performance. This capacitor will provide a low impedance path for unwanted AC signals or noise modulated onto constant input voltage. There is no requirement for the ESR of the input capacitor but it is recommended to use ceramic capacitors for their low ESR and ESL. A good input capacitor will limit the influence of input trace inductance and source resistance during sudden load current changes. Enable Operation The SGM2033 uses the EN pin to enable/disable its device and to deactivate/activate the active discharge function. If the EN pin voltage is ≤ 0.4V the device is guaranteed to be disabled. The pass transistor is turned off so that there is virtually no current flow between the IN and OUT. The active discharge transistor is active so that the output voltage VOUT is pulled to GND through a 220Ω resistor. In the disable state the device consumes as low as typical 0.1μA from the VIN. If the EN pin voltage ≥ 1.5V the device is guaranteed to be enabled. The SGM2033 regulates the output voltage and the active discharge transistor is turned off. The EN pin has internal pull-down current source with typical value of 0.2μA which ensures that the device is turned off when the EN pin is not connected. In the case where the EN function isn’t required the EN should be tied directly to IN. SG Micro Corp www.sg-micro.com Output Current Limit Output current is internally limited within the IC to a typical 500mA. The SGM2033 will source this amount of current measured with a voltage drop on the 90% of the nominal VOUT. If the output voltage is directly shorted to ground (VOUT = 0V), the short circuit protection will limit the output current to 220mA (TYP). The current limit and short circuit protection will work properly over whole temperature range and also input voltage range. There is no limitation for the short circuit duration. Power Dissipation As power dissipated in the SGM2033 increases, it might become necessary to provide some thermal relief. The maximum power dissipation supported by the device is dependent upon board design and layout. Mounting pad configuration on the PCB, the board material, and the ambient temperature affect the rate of junction temperature rise for the part. Reverse Current The PMOS pass transistor has an inherent body diode which will be forward biased in the case that VOUT > VIN. Due to this fact, in cases where the extended reverse current condition can be anticipated the device may require additional external protection. Power Supply Rejection Ratio The SGM2033 features very high power supply rejection ratio. If desired the PSRR at higher frequencies in the range from 100kHz to 10MHz can be tuned by the selection of COUT capacitor and proper PCB layout. Turn-On Time The turn-on time is defined as the time period from EN assertion to the point in which VOUT will reach 90% of its nominal value. PCB Layout Recommendations To obtain good transient performance and good regulation characteristics, place input and output capacitors close to the device pins and make the PCB traces wide. In order to minimize the solution size, use 0402 or 0201 capacitors with appropriate capacity. Larger copper area connected to the pins will also improve the device thermal resistance. Exposed pad can be tied to the GND pin for improved power dissipation and lower device temperature. NOVEMBER 2018 11 SGM2033 250mA, Ultra Low Noise and High PSRR LDO Regulators for RF and Analog Circuits REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (NOVEMBER 2018) to REV.A Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com NOVEMBER 2018 12 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS UTDFN-1×1-4AL D e 0.045 (REF) 0.10 (REF) 0.070 (REF) E b L L1 BOTTOM VIEW TOP VIEW 0.07 A 0.445 0.22 0.07 A1 A2 0.345 SIDE VIEW 1.30 0.22 0.40 0.25 0.65 RECOMMENDED LAND PATTERN (Unit: mm) Symbol SG Micro Corp www.sg-micro.com Dimensions In Millimeters MIN MOD MAX A 0.500 0.550 0.600 A1 0.000 0.050 A2 0.152 REF e 0.625 BSC D 0.950 1.000 1.050 E 0.950 1.000 1.050 b 0.175 0.225 0.275 L 0.200 0.250 0.300 L1 0.245 0.295 0.345 TX00146.001 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 UTDFN-1×1-4AL 7″ 9.0 1.16 1.16 0.63 4.0 2.0 2.0 8.0 Q1 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000