SGM2203-12YK3G/TR

SGM2203 150mA, High Voltage Regulator GENERAL DESCRIPTION FEATURES The SGM2203 is a high voltage and low power  High Input Voltage: Up to 36V consumption linear regulator. It is capable of supplying  Fixed Output Voltages: 2.5V, 2.8V, 3.0V, 3.3V, 3.5V, 150mA output current. The operating input voltage is 3.6V, 4.0V, 4.2V, 5.0V, 5.75V, 8.0V, 9.0V and 12V up to 36V. The output voltage range is from 2.5V to 12V  150mA Output Current in fixed output version.  Output Voltage Accuracy: ±3% at +25℃  Low Dropout Voltage Other features include current limit and thermal  Low Power Consumption: 4.2μA (TYP) shutdown protection.  Low Temperature Coefficient The SGM2203 is available in Green SOT-23, SOT-23-5  Current Limiting and Thermal Protection and SOT-89-3 packages. It operates over an operating  -40℃ to +85℃ Operating Temperature Range temperature range of -40℃ to +85℃.  Available in Green SOT-23, SOT-23-5 and SOT-89-3 Packages APPLICATIONS Palmtops High-Power Boost Applications Power Source for Battery-Powered Equipment Home Electric/Electronic Appliances TYPICAL APPLICATION VIN VIN CIN SGM2203 VOUT GND VOUT COUT Figure 1. Typical Application Circuit SG Micro Corp www.sg-micro.com JULY 2022 – REV. B SGM2203 150mA, High Voltage Regulator PACKAGE/ORDERING INFORMATION MODEL VOUT (V) PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SGM2203-2.5 2.5 SOT-23 -40℃ to +85℃ SGM2203-2.5YN3LG/TR SW6XX Tape and Reel, 3000 SGM2203-2.8 2.8 SOT-23 -40℃ to +85℃ SGM2203-2.8YN3LG/TR SW7XX Tape and Reel, 3000 SGM2203-3.0 3.0 SOT-23 -40℃ to +85℃ SGM2203-3.0YN3LG/TR SW8XX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23 -40℃ to +85℃ SGM2203-3.3YN3LG/TR SW9XX Tape and Reel, 3000 SGM2203-3.6 3.6 SOT-23 -40℃ to +85℃ SGM2203-3.6YN3LG/TR SWAXX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23 -40℃ to +85℃ SGM2203-5.0YN3LG/TR SWBXX Tape and Reel, 3000 SGM2203-2.5 2.5 SOT-89-3 -40℃ to +85℃ SGM2203-2.5YK3G/TR SWCXX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 -40℃ to +85℃ SGM2203-3.3YK3G/TR SWDXX Tape and Reel, 1000 SGM2203-3.6 3.6 SOT-89-3 -40℃ to +85℃ SGM2203-3.6YK3G/TR SWFXX Tape and Reel, 1000 SGM2203-4.0 4.0 SOT-89-3 -40℃ to +85℃ SGM2203-4.0YK3G/TR CG2XX Tape and Reel, 1000 SGM2203-4.2 4.2 SOT-89-3 -40℃ to +85℃ SGM2203-4.2YK3G/TR RD5XX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 -40℃ to +85℃ SGM2203-5.0YK3G/TR SWEXX Tape and Reel, 1000 SGM2203-5.75 5.75 SOT-89-3 -40℃ to +85℃ SGM2203-5.75YK3G/TR CG3XX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 -40℃ to +85℃ SGM2203-8.0YK3G/TR G74XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 -40℃ to +85℃ SGM2203-12YK3G/TR G3FXX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.0YK3LG/TR SX0XX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.3YK3LG/TR G75XX Tape and Reel, 1000 SGM2203-3.5 3.5 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.5YK3LG/TR G7EXX Tape and Reel, 1000 SGM2203-4.0 4.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-4.0YK3LG/TR GF3XX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-5.0YK3LG/TR SX1XX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-8.0YK3LG/TR SX2XX Tape and Reel, 1000 SGM2203-9.0 9.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-9.0YK3LG/TR SX3XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-12YK3LG/TR G40XX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-23-5 -40℃ to +85℃ SGM2203-3.0YN5G/TR GDFXX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23-5 -40℃ to +85℃ SGM2203-3.3YN5G/TR GE0XX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23-5 -40℃ to +85℃ SGM2203-5.0YN5G/TR GJ9XX Tape and Reel, 3000 SGM2203-4.2 4.2 SOT-23-5 (L-Type) -40℃ to +85℃ SGM2203-4.2YN5LG/TR GN9XX Tape and Reel, 3000 MARKING INFORMATION NOTE: XX = Date Code. YYY X X Date Code - Month Date Code - Year Serial Number Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. SG Micro Corp www.sg-micro.com JULY 2022 2 SGM2203 ABSOLUTE MAXIMUM RATINGS VIN to GND ........................................................ -0.3V to 44V VOUT to GND, VOUT ≤ 5.0V .........-0.3V to MIN(VIN + 0.3V, 6V) VOUT to GND, VOUT > 5.0V .......-0.3V to MIN(VIN + 0.3V, 15V) Power Dissipation, PD @ TA = +25℃ SOT-23 ......................................................................0.411W SOT-23-5 ...................................................................0.411W SOT-23-5 (L-Type) .................................................... 0.517W SOT-89-3 .................................................................. 1.923W SOT-89-3 (L-Type) .................................................... 0.822W Package Thermal Resistance SOT-23, θJA.............................................................. 304℃/W SOT-23, θJB.............................................................. 198℃/W SOT-23, θJC ............................................................. 202℃/W SOT-23-5, θJA .......................................................... 304℃/W SOT-23-5, θJB .......................................................... 172℃/W SOT-23-5, θJC .......................................................... 218℃/W SOT-23-5 (L-Type), θJA ............................................ 242℃/W SOT-23-5 (L-Type), θJB ............................................ 152℃/W SOT-23-5 (L-Type), θJC ............................................ 197℃/W SOT-89-3, θJA ............................................................ 65℃/W SOT-89-3, θJB ............................................................ 21℃/W SOT-89-3, θJC .......................................................... 101℃/W SOT-89-3 (L-Type), θJA ............................................ 152℃/W SOT-89-3 (L-Type), θJB .............................................. 56℃/W SOT-89-3 (L-Type), θJC ............................................ 129℃/W Junction Temperature ................................................ +150℃ Storage Temperature Range........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s) ........................... +260℃ ESD Susceptibility HBM ............................................................................ 4000V MM ................................................................................ 200V CDM ........................................................................... 1000V SG Micro Corp www.sg-micro.com 150mA, High Voltage Regulator RECOMMENDED OPERATING CONDITIONS Input Voltage Range ........................................... 2.7V to 36V Operating Temperature Range .......................-40℃ to +85℃ OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. JULY 2022 3 SGM2203 150mA, High Voltage Regulator PIN CONFIGURATIONS (TOP VIEW) GND (TOP VIEW) 1 3 VOUT VIN 2 GND 1 VIN 2 VOUT 3 SOT-23 (TOP VIEW) 5 4 NC VIN 1 GND 2 NC 3 NC SOT-23-5 5 VOUT 4 NC SOT-23-5 (L-Type) (TOP VIEW) (TOP VIEW) GND VIN 1 2 3 1 2 3 VOUT GND VIN GND VIN VOUT SOT-89-3 SOT-89-3 (L-Type) PIN DESCRIPTION PIN SOT-23 SOT-23-5 1 1 SOT-23-5 SOT-89-3 SOT-89-3 (L-Type) (L-Type) 2 2 1 NAME GND 2 3 5 1 3 VOUT 3 2 1 3 2 VIN ‒ 4, 5 3, 4 ‒ ‒ NC SG Micro Corp www.sg-micro.com FUNCTION Ground. Regulator Output Pin. It is recommended to use an output capacitor with effective capacitance in the range of 1μF to 10μF to ensure stability. The capacitor should be located very close to this pin. Regulator Input Pin. Up to 36V input voltage. It is recommended to use a 1μF or larger ceramic capacitor from VIN pin to ground to get good power supply decoupling. This ceramic capacitor should be placed as close as possible to VIN pin. No Connection. JULY 2022 4 SGM2203 150mA, High Voltage Regulator ELECTRICAL CHARACTERISTICS (VIN = VOUT + 2V or 4V, whichever is greater, CIN = COUT = 1μF, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER Input Voltage Range Output Voltage Accuracy SYMBOL VIN VOUT TEMP MIN VOUT < 3.3V CONDITIONS Full 2.7 32 VOUT ≥ 3.3V Full 2.7 36 +25℃ -3 IOUT = 1mA IOUT = 50mA Dropout Voltage (1) Line Regulation ∆VOUT ∆VIN × VOUT Load Regulation ΔVOUT Power Supply Rejection Ratio PSRR Output Voltage Temperature Coefficient ∆VOUT ∆TA × VOUT +25℃ IOUT = 150mA, VOUT ≥ 2.5V VIN = VOUT + 2V or 4V to 32V, IOUT = 1mA VIN = VOUT + 2V to 36V, IOUT = 1mA % μA mA 1300 Full 1850 2400 +25℃ 0.005 0.012 VOUT ≥ 3.3V +25℃ 0.005 0.012 VIN = VOUT + 2V or 4V, IOUT = 1mA to 150mA 25 IOUT = 1mA V 4.2 150 VOUT < 3.3V VOUT = 3.3V, IOUT = 10mA UNITS 5.5 6.5 +25℃ +25℃ VDROP 4.2 Full Maximum Output Current MAX 3 +25℃ No load Ground Pin Current TYP +25℃ 10 f = 217Hz +25℃ 55 f = 1kHz +25℃ 40 Full 68 mV %/V mV dB ppm/℃ Thermal Protection Thermal Shutdown Temperature Thermal Shutdown Hysteresis TSHDN 150 ℃ ΔTSHDN 20 ℃ NOTE: 1. The dropout voltage is defined as VIN - VOUT, when VOUT is 95% of the value of VOUT for VIN = VOUT + 2V. SG Micro Corp www.sg-micro.com JULY 2022 5 SGM2203 150mA, High Voltage Regulator TYPICAL PERFORMANCE CHARACTERISTICS TA = +25℃, VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, unless otherwise noted. Load-Transient Response Line-Transient Response VIN = 5.3V to 6.3V, IOUT = 50mA IOUT = 10mA to 100mA VIN 100mV/div 50mA/div IOUT 1V/div 100mV/div VOUT VOUT Time (2ms/div) Time (1ms/div) Power-Up/Power-Down Output Waveform Power Ramp-Up/Ramp-Down Output Waveform VIN = 0V to 6.3V, IOUT = 50mA VIN = 0V to 5.3V, IOUT = 50mA 2V/div VIN 2V/div VIN 2V/div VOUT 2V/div VOUT Time (4ms/div) Time (5ms/div) Output Short Waveform Thermal Protection Waveform VOUT 100mA/div 2V/div 100mA/div 1V/div VOUT IOUT IOUT Time (50ms/div) SG Micro Corp www.sg-micro.com Time (4ms/div) JULY 2022 6 SGM2203 150mA, High Voltage Regulator TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, unless otherwise noted. Pulse Load Current Output Waveform Power Supply Rejection Ratio vs. Frequency 100 80 1V/div PSRR (dB) VOUT 100mA/div IOUT IOUT = 10mA ∆VRIP = 0.2VP-P 60 40 20 0 0.01 Time (20ms/div) 0.1 1 10 100 Frequency (kHz) Dropout Voltage vs. Temperature Dropout Voltage vs. Output Current 1600 600 IOUT = 50mA Dropput Voltage (mV) Dropout Voltage (mV) 550 500 450 400 1200 800 400 350 300 -50 -25 0 25 50 75 0 100 0 25 50 Temperature (℃) Ground Pin Current vs. Temperature VIN = 36V, No Load 5.0 4.5 4.0 3.5 3.0 -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 100 125 150 Maximum Pulse Current vs. Headroom Voltage 500 Maximum Pulse Current (mA) Ground Pin Current (μA) 5.5 75 Output Current (mA) 75 100 Pulse Width 0.6ms 400 300 200 100 0 0 5 10 15 20 25 30 35 40 Headroom Voltage (V) JULY 2022 7 SGM2203 150mA, High Voltage Regulator APPLICATION INFORMATION Input Capacitor Selection (CIN) The input decoupling capacitor should be placed as close as possible to the VIN pin for ensuring the device stability. 1μF or larger X7R or X5R ceramic capacitor is selected to get good dynamic performance. When VIN is required to provide large current instantaneously, a large effective input capacitor is required. Multiple input capacitors can limit the input tracking inductance. Adding more input capacitors is available to restrict the ringing and to keep it below the device absolute maximum ratings. Output Capacitor Selection (COUT) The output capacitor should be placed as close as possible to the VOUT pin. COUT with the effective capacitance in the range of 1μF to 10μF X7R or X5R ceramic capacitor is selected to get good dynamic performance. For ceramic capacitor, temperature, DC bias and package size will change the effective capacitance, so enough margin of COUT must be considered in design. Additionally, COUT with larger capacitance and lower ESR will help increase the high frequency PSRR and improve the load transient response. Thermal Shutdown The SGM2203 can detect the temperature of die. When the die temperature exceeds the threshold value of thermal shutdown, the SGM2203 will be in shutdown state and it will remain in this state until the die temperature decreases to +130℃. REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. JULY 2022 ‒ REV.A.4 to REV.B Page Updated Package Thermal Resistance....................................................................................................................................................................................... 3 OCTOBER 2020 ‒ REV.A.3 to REV.A.4 Page Updated Package/Ordering Information section ......................................................................................................................................................................... 2 FEBRUARY 2020 ‒ REV.A.2 to REV.A.3 Page Updated Marking Information ...................................................................................................................................................................................................... 3 MAY 2019 ‒ REV.A.1 to REV.A.2 Page Added SGM2203-4.0YK3G/TR and SGM2203-5.75YK3G/TR versions ................................................................................................................................. All AUGUST 2017 ‒ REV.A to REV.A.1 Page Added SOT-23-5 package........................................................................................................................................................................................................ 2-4 Changes from Original (JUNE 2017) to REV.A Page Changed from product preview to production data ................................................................................................................................................................... All SG Micro Corp www.sg-micro.com JULY 2022 8 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23 D b E1 2.29 E 0.76 0.76 e e1 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L L1 A θ A1 c 0.25 A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.900 1.150 0.035 0.045 A1 0.000 0.100 0.000 0.004 A2 0.900 1.050 0.035 0.041 b 0.300 0.500 0.012 0.020 c 0.080 0.150 0.003 0.006 D 2.800 3.000 0.110 0.118 E 1.200 1.400 0.047 0.055 E1 2.250 2.550 0.089 0.100 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC L 0.550 REF 0.022 REF L1 0.300 0.500 0.012 0.020 θ 0° 8° 0° 8° NOTES: 1. Body dimensions do not include mode flash or protrusion. 2. This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00031.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° NOTES: 1. Body dimensions do not include mode flash or protrusion. 2. This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-89-3 D 2.0 A D1 3.0 E E1 0.7 45° b1 L e 1.5 b c 1.5 e1 1.0 RECOMMENDED LAND PATTERN (Unit: mm) Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 1.400 1.600 0.055 0.063 b 0.320 0.520 0.013 0.020 b1 0.400 0.580 0.016 0.023 c 0.350 0.440 0.014 0.017 D 4.400 4.600 0.173 D1 1.550 REF E 2.300 E1 3.940 0.181 0.061 REF 2.600 0.091 4.250 0.155 0.102 0.167 e 1.500 TYP 0.060 TYP e1 3.000 TYP 0.118 TYP L 0.900 1.200 0.035 0.047 NOTES: 1. Body dimensions do not include mode flash or protrusion. 2. This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00045.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter K0 A0 P1 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23 7″ 9.5 3.15 2.77 1.22 4.0 4.0 2.0 8.0 Q3 SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SOT-89-3 7″ 13.2 4.85 4.45 1.85 4.0 8.0 2.0 12.0 Q3 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000