SGM2203-5.0YK3G/TR

SGM2203 150mA, High Voltage Regulator GENERAL DESCRIPTION FEATURES The SGM2203 is a high voltage and high PSRR linear  High Input Voltage: Up to 36V regulator. It is capable of supplying 150mA output  Fixed Output Voltages: 2.5V, 2.8V, 3.0V, 3.3V, 3.5V, current. The operating input voltage is up to 36V. The 3.6V, 4.0V, 4.2V, 5.0V, 5.75V, 8.0V, 9.0V and 12V output voltage range is from 2.5V to 12V in fixed output  150mA Guaranteed Output Current version.  Output Voltage Accuracy: ±3% at +25℃ Other features include current limit and thermal shutdown protection. The SGM2203 is available in Green SOT-23, SOT-23-5 and SOT-89-3 packages. It operates over an operating temperature range of -40℃ to +85℃.  High PSRR: 40dB (TYP) at 1kHz  Low Dropout Voltage  Low Power Consumption: 4.2μA (TYP)  Low Temperature Coefficient  Thermal Shutdown Protection  Output Current Limit  -40℃ to +85℃ Operating Temperature Range  Available in Green SOT-23, SOT-23-5 and SOT-89-3 Packages APPLICATIONS Palmtops High-Power Boost Applications Power Source for Battery-Powered Equipment Home Electric/Electronic Appliances TYPICAL APPLICATION VIN VIN CIN 1μF SGM2203 VOUT GND VOUT COUT 1μF Figure 1. Typical Application Circuit SG Micro Corp www.sg-micro.com OCTOBER 2020 – REV. A. 4 SGM2203 150mA, High Voltage Regulator PACKAGE/ORDERING INFORMATION MODEL VOUT (V) PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SGM2203-2.5 2.5 SOT-23 -40℃ to +85℃ SGM2203-2.5YN3LG/TR SW6XX Tape and Reel, 3000 SGM2203-2.8 2.8 SOT-23 -40℃ to +85℃ SGM2203-2.8YN3LG/TR SW7XX Tape and Reel, 3000 SGM2203-3.0 3.0 SOT-23 -40℃ to +85℃ SGM2203-3.0YN3LG/TR SW8XX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23 -40℃ to +85℃ SGM2203-3.3YN3LG/TR SW9XX Tape and Reel, 3000 SGM2203-3.6 3.6 SOT-23 -40℃ to +85℃ SGM2203-3.6YN3LG/TR SWAXX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23 -40℃ to +85℃ SGM2203-5.0YN3LG/TR SWBXX Tape and Reel, 3000 SGM2203-2.5 2.5 SOT-89-3 -40℃ to +85℃ SGM2203-2.5YK3G/TR SWCXX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 -40℃ to +85℃ SGM2203-3.3YK3G/TR SWDXX Tape and Reel, 1000 SGM2203-3.6 3.6 SOT-89-3 -40℃ to +85℃ SGM2203-3.6YK3G/TR SWFXX Tape and Reel, 1000 SGM2203-4.0 4.0 SOT-89-3 -40℃ to +85℃ SGM2203-4.0YK3G/TR CG2XX Tape and Reel, 1000 SGM2203-4.2 4.2 SOT-89-3 -40℃ to +85℃ SGM2203-4.2YK3G/TR RD5XX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 -40℃ to +85℃ SGM2203-5.0YK3G/TR SWEXX Tape and Reel, 1000 SGM2203-5.75 5.75 SOT-89-3 -40℃ to +85℃ SGM2203-5.75YK3G/TR CG3XX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 -40℃ to +85℃ SGM2203-8.0YK3G/TR G74XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 -40℃ to +85℃ SGM2203-12YK3G/TR G3FXX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.0YK3LG/TR SX0XX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.3YK3LG/TR G75XX Tape and Reel, 1000 SGM2203-3.5 3.5 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-3.5YK3LG/TR G7EXX Tape and Reel, 1000 SGM2203-4.0 4.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-4.0YK3LG/TR GF3XX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-5.0YK3LG/TR SX1XX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-8.0YK3LG/TR SX2XX Tape and Reel, 1000 SGM2203-9.0 9.0 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-9.0YK3LG/TR SX3XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 (L-Type) -40℃ to +85℃ SGM2203-12YK3LG/TR G40XX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-23-5 -40℃ to +85℃ SGM2203-3.0YN5G/TR GDFXX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23-5 -40℃ to +85℃ SGM2203-3.3YN5G/TR GE0XX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23-5 -40℃ to +85℃ SGM2203-5.0YN5G/TR GJ9XX Tape and Reel, 3000 SGM2203-4.2 4.2 SOT-23-5 (L-Type) -40℃ to +85℃ SGM2203-4.2YN5LG/TR GN9XX Tape and Reel, 3000 MARKING INFORMATION NOTE: XX = Date Code. YYY X X Date Code - Month Date Code - Year Serial Number Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. SG Micro Corp www.sg-micro.com OCTOBER 2020 2 SGM2203 ABSOLUTE MAXIMUM RATINGS VIN to GND ........................................................ -0.3V to 44V VOUT to GND, VOUT ≤ 5.0V ......... -0.3V to Min(VIN + 0.3V, 6V) VOUT to GND, VOUT > 5.0V ....... -0.3V to Min(VIN + 0.3V, 15V) Power Dissipation, PD @ TA = +25℃ SOT-23 ......................................................................0.411W SOT-23-5 ...................................................................0.411W SOT-23-5 (L-Type) .................................................... 0.517W SOT-89-3 .................................................................. 1.923W SOT-89-3 (L-Type) .................................................... 0.822W Package Thermal Resistance SOT-23, θJA.............................................................. 304℃/W SOT-23-5, θJA .......................................................... 304℃/W SOT-23-5 (L-Type), θJA ............................................ 242℃/W SOT-89-3, θJA ............................................................ 65℃/W SOT-89-3 (L-Type), θJA ............................................ 152℃/W Junction Temperature ................................................ +150℃ Storage Temperature Range ........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s)............................ +260℃ ESD Susceptibility HBM ............................................................................ 4000V MM ................................................................................ 200V CDM ........................................................................... 1000V 150mA, High Voltage Regulator OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. RECOMMENDED OPERATING CONDITIONS Input Voltage Range ........................................... 2.7V to 36V Operating Temperature Range ...................... -40℃ to +85℃ SG Micro Corp www.sg-micro.com OCTOBER 2020 3 SGM2203 150mA, High Voltage Regulator PIN CONFIGURATIONS (TOP VIEW) GND (TOP VIEW) 1 3 VOUT VIN 2 GND 1 VIN 2 VOUT 3 SOT-23 (TOP VIEW) 5 4 NC VIN 1 GND 2 NC 3 NC SOT-23-5 5 VOUT 4 NC SOT-23-5 (L-Type) (TOP VIEW) (TOP VIEW) GND VIN 1 2 3 1 2 3 VOUT GND VIN GND VIN VOUT SOT-89-3 SOT-89-3 (L-Type) PIN DESCRIPTION PIN SOT-23 SOT-23-5 1 1 SOT-23-5 SOT-89-3 SOT-89-3 (L-Type) (L-Type) 2 2 1 NAME GND 2 3 5 1 3 VOUT 3 2 1 3 2 VIN ‒ 4, 5 3, 4 ‒ ‒ NC SG Micro Corp www.sg-micro.com FUNCTION Ground. Regulator Output Pin. It is recommended to use an output capacitor with effective capacitance in the range of 1μF to 10μF. The capacitor should be located very close to this pin. Regulator Input Pin. Up to 36V input voltage. It is recommended to use a 1μF or larger ceramic capacitor from VIN pin to ground. Not Connected. OCTOBER 2020 4 SGM2203 150mA, High Voltage Regulator ELECTRICAL CHARACTERISTICS (VIN = VOUT + 2V or 4V, whichever is greater, CIN = COUT = 1μF, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER Input Voltage Range Output Voltage Accuracy SYMBOL VIN VOUT TEMP MIN VOUT < 3.3V CONDITIONS Full 2.7 32 VOUT ≥ 3.3V Full 2.7 36 IOUT = 1mA +25℃ -3 +25℃ No load Ground Pin Current IOUT = 50mA (1) VDROP Line Regulation ∆VOUT ∆VIN × VOUT Load Regulation ΔVOUT +25℃ IOUT = 150mA, VOUT ≥ 2.5V VIN = VOUT + 2V or 4V to 32V, IOUT = 1mA VIN = VOUT + 2V to 36V, IOUT = 1mA V % μA 4.2 150 mA 1300 Full 1850 2400 VOUT < 3.3V +25℃ 0.005 0.012 VOUT ≥ 3.3V +25℃ 0.005 0.012 25 mV %/V +25℃ 10 f = 217Hz +25℃ 55 f = 1kHz +25℃ 40 Full 68 ppm/℃ TSHDN 150 ℃ ΔTSHDN 20 ℃ Power Supply Rejection Ratio PSRR Output Voltage Temperature (2) Coefficient ∆VOUT ∆TA × VOUT VIN = VOUT + 2V or 4V, IOUT = 1mA to 150mA UNITS 5.5 6.5 +25℃ +25℃ MAX 3 4.2 Full Maximum Output Current Dropout Voltage TYP VOUT = 3.3V, IOUT = 10mA IOUT = 1mA mV dB Thermal Protection Thermal Shutdown Temperature Thermal Shutdown Hysteresis NOTES: 1. The dropout voltage is defined as VIN - VOUT, when VOUT is 95% of the value of VOUT for VIN = VOUT + 2V. 2. Output voltage temperature coefficient is defined as the worst-case voltage change divided by the total temperature range. SG Micro Corp www.sg-micro.com OCTOBER 2020 5 SGM2203 150mA, High Voltage Regulator TYPICAL PERFORMANCE CHARACTERISTICS TA = +25℃, VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, unless otherwise noted. Load-Transient Response Line-Transient Response VIN = 5.3V to 6.3V, IOUT = 50mA IOUT = 10mA to 100mA VIN 100mV/div 50mA/div IOUT 1V/div 100mV/div VOUT VOUT Time (2ms/div) Time (1ms/div) Power-Up/Power-Down Output Waveform Power Ramp-Up/Ramp-Down Output Waveform VIN = 0V to 6.3V, IOUT = 50mA VIN = 0V to 5.3V, IOUT = 50mA 2V/div VIN 2V/div VIN 2V/div VOUT 2V/div VOUT Time (4ms/div) Time (5ms/div) Output Short Waveform Thermal Protection Waveform 2V/div 1V/div VOUT VOUT 100mA/div 100mA/div IOUT IOUT Time (50ms/div) SG Micro Corp www.sg-micro.com Time (4ms/div) OCTOBER 2020 6 SGM2203 150mA, High Voltage Regulator TYPICAL PERFORMANCE CHARACTERISTICS (continued) TA = +25℃, VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, unless otherwise noted. Pulse Load Current Output Waveform Power Supply Rejection Ratio vs. Frequency 100 80 1V/div PSRR (dB) VOUT 100mA/div IOUT IOUT = 10mA ∆VRIP = 0.2VP-P 60 40 20 0 0.01 Time (20ms/div) 0.1 1 10 100 Frequency (kHz) Dropout Voltage vs. Temperature Dropout Voltage vs. Output Current 1600 600 IOUT = 50mA Dropput Voltage (mV) Dropout Voltage (mV) 550 500 450 400 1200 800 400 350 300 -50 -25 0 25 50 75 0 100 0 25 50 Temperature (℃) Ground Pin Current vs. Temperature VIN = 36V, No Load 5.0 4.5 4.0 3.5 3.0 -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 100 125 150 Maximum Pulse Current vs. Headroom Voltage 500 Maximum Pulse Current (mA) Ground Pin Current (μA) 5.5 75 Output Current (mA) 75 100 Pulse Width 0.6ms 400 300 200 100 0 0 5 10 15 20 25 30 35 40 Headroom Voltage (V) OCTOBER 2020 7 SGM2203 150mA, High Voltage Regulator APPLICATION INFORMATION Input Capacitor Selection (CIN) The input decoupling capacitor is necessary to be connected as close as possible to the VIN pin for ensuring the device stability. 1μF or larger X7R or X5R ceramic capacitor is selected to get good dynamic performance. When VIN is required to provide large current instantaneously, a large effective input capacitor is required. Multiple input capacitors can limit the input tracking inductance. Adding more input capacitors is available to restrict the ringing and to keep it below the device absolute maximum ratings. Output Capacitor Selection (COUT) The output decoupling capacitor should be located as close as possible to the VOUT pin. COUT with the effective capacitance in the range of 1μF to 10μF X7R or X5R ceramic capacitor is selected to get good dynamic performance. For ceramic capacitor, temperature, DC bias and package size will change the effective capacitance, so enough margin of COUT must be considered in design. Larger capacitance and lower ESR COUT will help improve the load transient response and increase the high frequency PSRR. Thermal Shutdown The SGM2203 can detect the temperature of die. When the die temperature exceeds the threshold value of thermal shutdown, the SGM2203 will be in shutdown state and it will remain in this state until the die temperature decreases to +130℃. REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. OCTOBER 2020 ‒ REV.A.3 to REV.A.4 Page Updated Package/Ordering Information section .............................................................................................................................................................................. 2 FEBRUARY 2020 ‒ REV.A.2 to REV.A.3 Page Updated Marking Information ............................................................................................................................................................................................................ 3 MAY 2019 ‒ REV.A.1 to REV.A.2 Page Added SGM2203-4.0YK3G/TR and SGM2203-5.75YK3G/TR versions ..................................................................................................................................... All AUGUST 2017 ‒ REV.A to REV.A.1 Page Added SOT-23-5 package .............................................................................................................................................................................................................. 2-4 Changes from Original (JUNE 2017) to REV.A Page Changed from product preview to production data ........................................................................................................................................................................ All SG Micro Corp www.sg-micro.com OCTOBER 2020 8 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23 D b E1 2.29 E 0.76 0.76 e e1 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L L1 A A1 c θ 0.25 A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.900 1.150 0.035 0.045 A1 0.000 0.100 0.000 0.004 A2 0.900 1.050 0.035 0.041 b 0.300 0.500 0.012 0.020 c 0.080 0.150 0.003 0.006 D 2.800 3.000 0.110 0.118 E 1.200 1.400 0.047 0.055 E1 2.250 2.550 0.089 0.100 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC L 0.550 REF 0.022 REF L1 0.300 0.500 0.012 0.020 θ 0° 8° 0° 8° SG Micro Corp www.sg-micro.com TX00031.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-89-3 D 2.0 A D1 3.0 E E1 0.7 45° b1 L 1.5 b e c e1 1.5 1.0 RECOMMENDED LAND PATTERN (Unit: mm) Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 1.400 1.600 0.055 0.063 b 0.320 0.520 0.013 0.020 b1 0.400 0.580 0.016 0.023 c 0.350 0.440 0.014 0.017 D 4.400 4.600 0.173 D1 1.550 REF E 2.300 E1 3.940 0.181 0.061 REF 2.600 0.091 4.250 0.155 0.102 0.167 e 1.500 TYP 0.060 TYP e1 3.000 TYP 0.118 TYP L SG Micro Corp www.sg-micro.com 0.900 1.200 0.035 0.047 TX00045.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter K0 A0 P1 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23 7″ 9.5 3.15 2.77 1.22 4.0 4.0 2.0 8.0 Q3 SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SOT-89-3 7″ 13.2 4.85 4.45 1.85 4.0 8.0 2.0 12.0 Q3 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000