SGM42507B-2.8XTN6G/TR

SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil GENERAL DESCRIPTION FEATURES The SGM42507 is an integrated driver IC for driving ● Internal OC/UV/OT Protections  Over-Current Threshold Options: motors and coils in industrial applications. The PH and 0.45A/0.9A/1.5A EN/FAULT pins allow simple interfacing to controller  Under-Voltage Threshold Options: circuits. 1.75V/2.8V/3.6V Internal protection functions are provided for undervoltage lockout (UVLO), over-current protection (OCP) and over-temperature protection (OTP). Fault  Over-Temperature Protection ● Up to 7.5V Supply Range for Applications Powered by: conditions are indicated by the EN/FAULT pin.  1 Li+/Poly Cell The SGM42507A is available in a Green TSOT-23-6  2/3/4 Dry Cells package. The SGM42507B/C are available in Green SC70-6 and TSOT-23-6 packages. They operate over an ambient temperature range of -40℃ to +125℃. APPLICATIONS  1/2 LiSOCl2 Cell(s) ● Selectable Slow or Fast Decay Modes ● -40℃ to +125℃ Operating Temperature Range ● SGM42507A is Available in a Green TSOT-23-6 Package SGM42507B/C are Available in Green SC70-6 and Robot TSOT-23-6 Packages Utility Meter Solenoid TYPICAL APPLICATION VCC 4.7μF GND Enable Input or Alert Output IO/MCU SG Micro Corp www.sg-micro.com VCC OUTA a EN/FAULT SGM42507 PH OUTB NOVEMBER 2018 – REV. A SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil PACKAGE/ORDERING INFORMATION MODEL PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SGM42507A-1.75 TSOT-23-6 -40℃ to +125℃ SGM42507A-1.75XTN6G/TR GM5XX Tape and Reel, 3000 SGM42507A-2.8 TSOT-23-6 -40℃ to +125℃ SGM42507A-2.8XTN6G/TR GS0XX Tape and Reel, 3000 SGM42507A-3.6 TSOT-23-6 -40℃ to +125℃ SGM42507A-3.6XTN6G/TR GS1XX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507B-1.75XC6G/TR GPBXX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507B-1.75XTN6G/TR M09XX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507B-2.8XC6G/TR GW8XX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507B-2.8XTN6G/TR M0AXX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507B-3.6XC6G/TR GW9XX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507B-3.6XTN6G/TR M0BXX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507C-1.75XC6G/TR GWAXX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507C-1.75XTN6G/TR M0CXX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507C-2.8XC6G/TR GWBXX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507C-2.8XTN6G/TR M0DXX Tape and Reel, 3000 SC70-6 -40℃ to +125℃ SGM42507C-3.6XC6G/TR GWCXX Tape and Reel, 3000 TSOT-23-6 -40℃ to +125℃ SGM42507C-3.6XTN6G/TR M0EXX Tape and Reel, 3000 SGM42507B-1.75 SGM42507B-2.8 SGM42507B-3.6 SGM42507C-1.75 SGM42507C-2.8 SGM42507C-3.6 MARKING INFORMATION SELECTABLE MODEL NOTE: XX = Date Code. YYY X X Date Code - Month Date Code - Year Serial Number Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. SG Micro Corp www.sg-micro.com MODEL OVER-CURRENT PROTECTION THRESHOLD (A) UNDER-VOLTAGE PROTECTION THRESHOLD (V) SGM42507A-1.75 1.5 1.75 SGM42507A-2.8 1.5 2.8 SGM42507A-3.6 1.5 3.6 SGM42507B-1.75 0.9 1.75 SGM42507B-2.8 0.9 2.8 SGM42507B-3.6 0.9 3.6 SGM42507C-1.75 0.45 1.75 SGM42507C-2.8 0.45 2.8 SGM42507C-3.6 0.45 3.6 NOVEMBER 2018 2 SGM42507 ABSOLUTE MAXIMUM RATINGS 1.5A, 7.5V H-Bridge Driver for Motor/Coil (1) VCC ....................................................................-0.3V to 9V Digital Input Pin Voltage Range ........................... -0.3V to 6V Package Thermal Resistance SC70-6, θJA ........................................................... 245.8℃/W TSOT-23-6, θJA ..................................................... 217.8℃/W Junction Temperature .................................................+150℃ Storage Temperature Range ........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 5000V MM ................................................................................. 300V CDM ............................................................................ 1000V NOTE 1: Guaranteed SGM42507 work at 7.5V DC and surge to 9V. RECOMMENDED OPERATING CONDITIONS VCC ......................................................................1.9V to 7.5V Digital Input Pin Voltage Range .............................0V to 5.5V Ambient Temperature Range........................ -40℃ to +125℃ SG Micro Corp www.sg-micro.com OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. NOVEMBER 2018 3 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil PIN CONFIGURATIONS SGM42507A/B/C (TOP VIEW) EN/FAULT 1 6 OUTB GND 2 5 VCC PH 3 4 OUTA SGM42507B/C (TOP VIEW) OUTB 1 6 OUTA VCC 2 5 GND EN/FAULT 3 4 PH TSOT-23-6 SC70-6 PIN DESCRIPTION NAME TYPE FUNCTION EN/FAULT I/O Enable Input or Alert Output (OTP, OCP, UVLO) Pin. Logic high to enable normal operation, logic low to enter low power dissipation sleep mode and reset all internal logic. Internal pull-down. This output is not valid when the device into minimum power dissipation sleep mode. GND G Ground. PH I Direction Input Pin (VPH ≤ VCC). Logic high for sourcing from OUTA and sinking into OUTB, logic low for reverse driving. Internal pull-down. OUTA O H-Bridge Output A. VCC P Power Input Pin. A 4.7μF (MIN) ceramic bypass capacitor to GND is recommended. OUTB O H-Bridge Output B. NOTE: I: input, O: output, I/O: input or output, G: ground, P: power for the circuit. SG Micro Corp www.sg-micro.com NOVEMBER 2018 4 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil ELECTRICAL CHARACTERISTICS (TA = +25℃, VCC = 5V, EN/FAULT pin connected to 5V through 500Ω resistor, Full = -40℃ to +125℃, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS Power Supplies Power Supply Voltage VCC +25℃ 1.9 7.5 V Digital Input Voltage Range (EN/FAULT, PH) VIN +25℃ 0 5.5 V Power Supply Current IVCC No PWM +25℃ 45 74 μA Sleep Mode Supply Current IVCCQ EN/FAULT = GND +25℃ 1.3 2 μA SGM42507A/B/C-1.75 +25℃ 1.7 1.9 SGM42507A/B/C-2.8 +25℃ 1.95 2.15 SGM42507A/B/C-3.6 +25℃ 1.7 1.85 +25℃ 100 SGM42507A/B/C-1.75 +25℃ 1.75 1.9 SGM42507A/B/C-2.8 +25℃ 2.8 3.05 SGM42507A/B/C-3.6 +25℃ 3.6 3.75 VHYS +25℃ 100 Input Low Voltage VIL Full Input High Voltage VIH Full 1.6 Input Low Current IIL VIN = 0V +25℃ -500 VCC Under-Voltage Lockout Voltage VCC Under-Voltage Lockout Voltage Hysteresis VCC Under-Voltage Protection Voltage VCC Under-Voltage Protection Voltage Hysteresis VUVLO VHYS VUVP V mV V mV Logic Level Inputs 0.6 V V 500 nA Input High Weak Pull-Down Current IIH_weak VIN = 5.5V +25℃ 60 85 μA Input High Strong Pull-Down Current IIH_strong VIN = 1.1V +25℃ 300 380 μA +25℃ 300 Input Deglitch Time tDEG ns EN/FAULT Output (Open-Drain Output) Output Low Voltage VOL Output High Leakage Current IOH VCC = 1.8V, IOUT = -5mA +25℃ 170 mV +25℃ 95 μA H-Bridge FETs SGM42507A-X, IOUT = 200mA HS FET On-Resistance RDS(ON) SGM42507B-X, IOUT = 200mA SGM42507C-X, IOUT = 200mA SGM42507A-X, IOUT = -200mA LS FET On-Resistance RDS(ON) SGM42507B-X, IOUT = -200mA SGM42507C-X, IOUT = -200mA Off-State Leakage Current SG Micro Corp www.sg-micro.com IOFF VOUT = 0V or 7.5V 375 +25℃ Full 550 385 +25℃ Full 570 400 +25℃ Full 600 180 +25℃ Full 335 185 +25℃ Full 360 mΩ 210 +25℃ Full +25℃ mΩ 395 -800 800 nA NOVEMBER 2018 5 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil ELECTRICAL CHARACTERISTICS (continued) (TA = +25℃, VCC = 5V, EN/FAULT pin connected to 5V through 500Ω resistor, Full = -40℃ to +125℃, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS Motor Driver 125 ns +25℃ 155 ns tPROP +25℃ 1 μs tDEAD +25℃ 255 ns SGM42507A-X +25℃ 1.5 SGM42507B-X +25℃ 0.9 SGM42507C-X +25℃ 0.45 tR Fall Time tF Propagation Delay INx to OUTx Dead Time (1) RL = 16Ω to GND, 10% to 90% VCC RL = 16Ω to VCC, 90% to 10% VCC +25℃ Rise Time Protection Circuits Over-Current Protection Trip Level IOCP A Thermal Shutdown Thermal Shutdown Temperature TTSD 165 ℃ Thermal Shutdown Temperature Hysteresis THYS 30 ℃ nSLEEP Mode Time to Enter Sleep Mode tSLEEP Wake Time tWAKE +25℃ EN/FAULT inactive high to H-bridge on +25℃ 60 105 ms 4.5 ms NOTE: 1. Internal dead time. External implementation is not necessary. SG Micro Corp www.sg-micro.com NOVEMBER 2018 6 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil TYPICAL PERFORMANCE CHARACTERISTICS HS FET On-Resistance vs. Temperature 600 LS FET On-Resistance vs. Temperature 450 SGM42507A IOUT = 200mA 550 LS FET On-Resistance (mΩ) HS FET On-Resistance (mΩ) 650 VCC = 2V 500 450 VCC = 5V 400 VCC = 7.5V 350 300 -50 -25 0 25 50 75 100 400 350 300 VCC = 2V 250 VCC = 5V 200 VCC = 7.5V 150 100 125 SGM42507A IOUT = -200mA -50 -25 0 Temperature (℃) SGM42507B IOUT = 200mA 450 420 390 VCC = 5V 360 330 300 -50 -25 0 25 50 75 100 280 220 190 130 100 125 VCC = 5V 160 -50 -25 0 LS FET On-Resistance (mΩ) HS FET On-Resistance (mΩ) SGM42507C IOUT = 200mA 420 VCC = 5V 360 330 -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 50 75 100 125 LS FET On-Resistance vs. Temperature 450 300 25 Temperature (℃) 310 390 125 250 HS FET On-Resistance vs. Temperature 480 100 SGM42507B IOUT = -200mA Temperature (℃) 510 75 LS FET On-Resistance vs. Temperature 310 LS FET On-Resistance (mΩ) HS FET On-Resistance (mΩ) 480 50 Temperature (℃) HS FET On-Resistance vs. Temperature 510 25 75 100 125 280 SGM42507C IOUT = -200mA 250 220 VCC = 5V 190 160 130 100 -50 -25 0 25 50 75 100 125 Temperature (℃) NOVEMBER 2018 7 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil TYPICAL PERFORMANCE CHARACTERISTICS (continued) Power Supply Current vs. Supply Voltage Sleep Mode Supply Current vs. Supply Voltage 1.6 Sleep Mode Supply Current (μA) Power Supply Current (μA) 50 45 40 35 30 25 20 2 3 4 5 6 7 1.5 1.4 1.3 1.2 1.1 1.0 8 2 3 4 Supply Voltage (V) Power Supply Current vs. Temperature 7 8 2.9 VCC = 7.5V 48 43 Sleep Mode Supply Current (μA) Power Supply Current (μA) 6 Sleep Mode Supply Current vs. Temperature 53 VCC = 5V 38 33 28 23 18 5 Supply Voltage (V) VCC = 2V -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 75 100 125 2.5 2.1 VCC = 7.5V 1.7 1.3 VCC = 5V 0.9 0.5 VCC = 2V -50 -25 0 25 50 75 100 125 Temperature (℃) NOVEMBER 2018 8 SGM42507 1.5A, 7.5V H-Bridge Driver for Motor/Coil REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (NOVEMBER 2018) to REV.A Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com NOVEMBER 2018 9 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS TSOT-23-6 0.69 0.95 D e E1 2.59 E 0.99 b RECOMMENDED LAND PATTERN (Unit: mm) L A θ A1 0.25 c A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX 1.000 0.043 A A1 0.000 0.100 0.000 0.004 A2 0.700 0.900 0.028 0.039 b 0.300 0.500 0.012 0.020 c 0.080 0.200 0.003 0.008 D 2.850 2.950 0.112 0.116 E 1.550 1.650 0.061 0.065 E1 2.650 2.950 0.104 e SG Micro Corp www.sg-micro.com 0.950 BSC 0.116 0.037 BSC L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00038.001 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SC70-6 D e1 0.65 e E1 E 1.9 0.75 b 0.4 1.3 RECOMMENDED LAND PATTERN (Unit: mm) L L1 A c θ A1 A2 0.20 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.900 1.100 0.035 0.043 A1 0.000 0.100 0.000 0.004 A2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 D 2.000 2.200 0.079 0.087 E 1.150 1.350 0.045 0.053 E1 2.150 2.450 0.085 0.096 e 0.65 TYP 0.026 TYP e1 1.300 BSC 0.051 BSC L 0.525 REF 0.021 REF L1 0.260 0.460 0.010 0.018 θ 0° 8° 0° 8° SG Micro Corp www.sg-micro.com TX00044.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter K0 A0 P1 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SC70-6 7″ 9.5 2.40 2.50 1.20 4.0 4.0 2.0 8.0 Q3 TSOT-23-6 7″ 9.5 3.20 3.10 1.10 4.0 4.0 2.0 8.0 Q3 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000