SGM4568YTQG20G/TR

SGM4568 8-Bit Bidirectional Voltage-Level Translator with Auto Direction Sensing GENERAL DESCRIPTION FEATURES The SGM4568 is an 8-bit, non-inverting, bidirectional ● Power Supply Voltage Range (VCCA ≤ VCCB) voltage-level translator which features two independent  A Ports: 1.2V to 5.5V configurable power-supply lines. The A and B ports  B Ports: 1.65V to 5.5V ● Support VCCA or VCCB Isolation track the VCCA supply and VCCB supply respectively. The  When VCCA or VCCB is Low, Device Enters supply voltage range is 1.2V to 5.5V for A ports and Power-Down Mode 1.65V to 5.5V for B ports. The device provides a bidirectional translation function between the different ● OE Input Circuit Referenced to VCCA voltage nodes (including 1.2V, 1.5V, 1.8V, 2.5V, 3.3V ● Support Partial-Power-Down Function and 5V). ● Support Push-Pull Output The SGM4568 has an output enable (OE) function, ● Low Power Consumption which controls the outputs states. When OE goes low, ● -40℃ to +85℃ Operating Temperature Range all outputs enter into the high-impedance state. The OE ● Available in Green TSSOP-20 and TQFN-3×3-20L should be connected to GND via a pull-down resistor, Packages and the minimum resistor value is depended on the current source capability of the driver. APPLICATIONS The SGM4568 features the OE input circuit which is Universal Asynchronous Receiver/Transmitter referenced to VCCA. General Purpose I/O (GPIO) The SGM4568 is available in Green TSSOP-20 and Smart Phones TQFN-3×3-20L packages. It operates over an ambient Portable Equipment temperature range of -40℃ to +85℃. TYPICAL APPLICATION 3.3V 1.8V 0.1μF 1.8V Controller VCCA VCCB 0.1μF OE 3.3V Controller SGM4568 I/O GND A1 A2 A3 A4 A5 A6 A7 A8 GND B1 B2 B3 B4 B5 B6 B7 B8 I/O GND Figure 1. Typical Application Circuit SG Micro Corp www.sg-micro.com APRIL 2022 – REV. A. 3 8-Bit Bidirectional Voltage-Level Translator with Auto Direction Sensing SGM4568 PACKAGE/ORDERING INFORMATION MODEL SGM4568 PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER TSSOP-20 -40℃ to +85℃ SGM4568YTS20G/TR TQFN-3×3-20L -40℃ to +85℃ SGM4568YTQG20G/TR PACKAGE MARKING SGM4568YTS20 XXXXX SGM 4568QG XXXXX PACKING OPTION Tape and Reel, 4000 Tape and Reel, 4000 MARKING INFORMATION TSSOP-20 TQFN-3×3-20L XXXXX = Date Code, Trace Code and Vendor Code. XXXXX = Date Code and Vendor Code. XXXXX Vendor Code Trace Code Date Code - Year XXXXX Vendor Code Date Code - Week Date Code - Year Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. SG Micro Corp www.sg-micro.com ESD SENSITIVITY CAUTION This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. APRIL 2022 2 SGM4568 8-Bit Bidirectional Voltage-Level Translator with Auto Direction Sensing ABSOLUTE MAXIMUM RATINGS Supply Voltage Range VCCA ................................................................... -0.3V to 6V VCCB ................................................................... -0.3V to 6V Input Voltage Range, VI A Ports ............................................................... -0.3V to 6V B Ports ............................................................... -0.3V to 6V Output Voltage Range for the High-Impedance or Power-Off State, VO A Ports ............................................................... -0.3V to 6V B Ports ............................................................... -0.3V to 6V (1) Output Voltage Range for the High or Low State, VO A Ports ................................................. -0.3V to VCCA + 0.3V B Ports ................................................. -0.3V to VCCB + 0.3V Input Clamp Current, IIK (VI < 0) ................................... -50mA Output Clamp Current, IOK (VO < 0).............................. -25mA Continuous Current through VCCA, VCCB, or GND ...... ±100mA Junction Temperature .................................................+150℃ Storage Temperature Range ........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 4000V MM ................................................................................. 300V NOTE: 1. VCCA and VCCB values are shown in the recommended operating conditions table. SG Micro Corp www.sg-micro.com RECOMMENDED OPERATING CONDITIONS (2, 3) Supply Voltage Range VCCA .................................................................. 1.2V to 5.5V VCCB ................................................................ 1.65V to 5.5V High-Level Input Voltage, VIH (4) Data Inputs .......................................... VCCI × 0.85 to VCCI OE Input ................................................ VCCA × 0.85 to 5.5V Low-Level Input Voltage, VIL (4) Data Inputs .............................................. 0V to VCCI × 0.2 OE Input ..................................................... 0V to VCCA × 0.2 Output Voltage Range for the High-Impedance or Power-Off State, VO A Ports ................................................................. 0V to 5.5V B Ports ................................................................. 0V to 5.5V Input Transition Rise or Fall Rate, Δt/ΔV A Port Inputs .................................................. 40ns/V (MAX) B Port Inputs .................................................. 40ns/V (MAX) Operating Temperature Range....................... -40℃ to +85℃ NOTES: 2. Ensure that the A side and B side of the unused data I/O pairs remain the same state, that is., both at VCCI or both at GND. 3. Ensure that VCCA ≤ VCCB and VCCA must not exceed 5.5V. 4. VCCI is the supply voltage associated with the input ports. APRIL 2022 3 8-Bit Bidirectional Voltage-Level Translator with Auto Direction Sensing SGM4568 PIN CONFIGURATIONS (TOP VIEW) (TOP VIEW) A1 1 20 B1 VCCA 2 19 VCCB A2 3 18 B2 A3 4 17 B3 A4 5 16 B4 A5 6 15 B5 A6 7 14 B6 A7 8 13 B7 A8 9 12 B8 OE 10 11 GND VCCA A1 B1 VCCB B2 20 19 18 17 16 A2 1 15 A3 2 14 B4 A4 3 A5 A6 GND B3 13 B5 4 12 B6 5 11 B7 6 7 A7 A8 8 9 OE GND 10 B8 TQFN-3×3-20L TSSOP-20 PIN DESCRIPTION PIN NAME FUNCTION 19 A1 2 20 VCCA 3 1 A2 Input/Output 1. It tracks the VCCA supply. Supply Voltage on A Ports. It can be operated from 1.2V to 5.5V, and VCCA is always ≤ VCCB. Input/Output 2. It tracks the VCCA supply. 4 2 A3 Input/Output 3. It tracks the VCCA supply. 5 3 A4 Input/Output 4. It tracks the VCCA supply. 6 4 A5 Input/Output 5. It tracks the VCCA supply. 7 5 A6 Input/Output 6. It tracks the VCCA supply. 8 6 A7 Input/Output 7. It tracks the VCCA supply. 9 7 A8 10 8 OE 11 9 GND Input/Output 8. It tracks the VCCA supply. Output Enable Control Pin. Active high. When OE goes low, all outputs enter into the high-impedance state. It tracks the VCCA supply. Ground. 12 10 B8 Input/Output 8. It tracks the VCCB supply. 13 11 B7 Input/Output 7. It tracks the VCCB supply. 14 12 B6 Input/Output 6. It tracks the VCCB supply. 15 13 B5 Input/Output 5. It tracks the VCCB supply. 16 14 B4 Input/Output 4. It tracks the VCCB supply. 17 15 B3 Input/Output 3. It tracks the VCCB supply. 18 16 B2 Input/Output 2. It tracks the VCCB supply. 19 17 VCCB 20 18 B1 TSSOP-20 TQFN-3×3-20L 1 ― Exposed Pad SG Micro Corp www.sg-micro.com GND Supply Voltage on B Ports. It can be operated from 1.65V to 5.5V. Input/Output 1. It tracks the VCCB supply. Exposed pad should be soldered to PCB board and connected to GND or left floating. APRIL 2022 4 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS TSSOP-20 D 5.94 E E1 1.78 b e 0.42 0.65 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol c H Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX 1.100 0.043 A A1 0.050 0.150 0.002 0.006 A2 0.800 1.000 0.031 0.039 b 0.190 0.300 0.007 0.012 c 0.090 0.200 0.004 0.008 D 6.400 6.600 0.252 0.259 E 4.300 4.500 0.169 0.177 E1 6.250 6.550 0.246 0.258 0.700 0.02 7° 1° e L 0.650 BSC 0.500 H θ SG Micro Corp www.sg-micro.com 0.026 BSC 0.25 TYP 1° 0.028 0.01 TYP 7° TX00021.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS TQFN-3×3-20L D e L D1 E E1 N20 k N1 b BOTTOM VIEW TOP VIEW 1.5 0.7 A 3.5 2.1 1.5 A1 A2 SIDE VIEW 0.4 0.2 RECOMMENDED LAND PATTERN (Unit: mm) Symbol Dimensions In Millimeters MIN MAX A 0.700 A1 0.000 A2 Dimensions In Inches MIN MAX 0.800 0.028 0.050 0.000 0.203 REF 0.031 0.002 0.008 REF D 2.924 3.076 0.115 0.121 D1 1.400 1.600 0.055 0.063 E 2.924 3.076 0.115 0.121 E1 1.400 1.600 0.055 0.063 0.250 0.006 k b 0.200 MIN 0.150 e L 0.008 MIN 0.400 TYP 0.324 0.010 0.016 TYP 0.476 0.013 0.019 NOTE: This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00082.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Width A0 W1 (mm) (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) 6.80 6.85 1.70 4.0 8.0 2.0 12.0 Q1 JCET-D8 16.4 6.80 6.90 1.50 4.0 8.0 2.0 16.0 Q1 HTTS 12.4 3.30 3.30 1.10 4.0 8.0 2.0 12.0 Q1 JCET-D8 Reel Diameter TSSOP-20 13″ 12.4 TSSOP-20 13″ TQFN-3×3-20L 13″ SG Micro Corp www.sg-micro.com W Pin1 Assembly (mm) Quadrant House DD0001 B0 (mm) Package Type TX10000.000 PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 13″ 386 280 370 5 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000