SGM6611AYTQV11G/TR

SGM6611 12.6V, 7A Fully-Integrated Synchronous Boost Converter GENERAL DESCRIPTION The SGM6611 family includes the SGM6611A and the SGM6611B. The SGM6611 is a fully-integrated synchronous boost converter. The 2.7V to 12V operating input voltage is suitable for single-cell or two-cell Li-Ion/Polymer batteries. This device is capable to provide 7A continuous switch current and an output voltage range of 4.5V to 12.6V. It also has an adjustable switching frequency ranging from 200kHz to 2.2MHz. The SGM6611 family has two operation modes, the pulse width modulation (PWM) mode and pulse frequency modulation (PFM). The SGM6611 family adopts the PWM mode at moderate to heavy load. The PFM mode is applied at light load by SGM6611A to improve the efficiency. However, the SGM6611B still adopts the PWM mode to prevent the device from low switching frequency faults. The protection features include output over-voltage protection at 13.2V, cycle-by-cycle over-current protection and thermal shutdown. The device also involves the functions of 4ms built-in soft-start and adjustable switch peak current limit. The SGM6611A and SGM6611B are both available in a Green TQFN-2×2.5-11L package. SG Micro Corp www.sg-micro.com FEATURES ● 2.7V to 12V Input Voltage Range ● 4.5V to 12.6V Output Voltage Range ● Up to 90% Efficiency (VIN = 3.3V, VOUT = 9V, IOUT = 2A) ● Adjustable Peak Current Limit up to 9.5A for High Pulse Current ● Adjustable Switching Frequency: 200kHz to 2.2MHz ● 4ms Built-in Soft-Start Time ● PFM Operation Mode at Light Load (SGM6611A) ● Forced PWM Operation Mode at Light Load (SGM6611B) ● Internal Output Over-Voltage Protection at 13.2V ● Over-Current Protection ● Thermal Shutdown ● Available in a Green TQFN-2×2.5-11L Package APPLICATIONS Portable POS Machine Bluetooth Speaker E-Cigarette Fast-Charging Power Bank OCTOBER 2021 – REV. A. 3 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 PACKAGE/ORDERING INFORMATION MODEL PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER SGM6611A TQFN-2×2.5-11L -40℃ to +85℃ SGM6611AYTQV11G/TR SGM6611B TQFN-2×2.5-11L -40℃ to +85℃ SGM6611BYTQV11G/TR PACKAGE MARKING 6611A XXXXX 6611B XXXXX PACKING OPTION Tape and Reel, 3000 Tape and Reel, 3000 MARKING INFORMATION NOTE: XXXXX = Date Code and Vendor Code. XXXXX Vendor Code Date Code - Week Date Code - Year Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS BOOT Voltage ........................................... -0.3V to VSW + 6V VIN, SW, FSW, VOUT Voltages ...................... -0.3V to 14.5V EN, VCC, COMP, ILIM, FB Voltages .................... -0.3V to 6V Package Thermal Resistance TQFN-2×2.5-11L, θJA ................................................. 60℃/W Junction Temperature .................................................+150℃ Storage Temperature Range........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 1500V MM ................................................................................. 300V CDM ............................................................................ 1000V RECOMMENDED OPERATING CONDITIONS Input Voltage Range ............................................2.7V to 12V Output Voltage Range ......................................4.5V to 12.6V Inductance, Effective Value, L ....................... 0.47μH to 10μH Input Capacitance, Effective Value, CIN ............... 10μF (MIN) Output Capacitance, Effective Value, COUT ... 10μF to 1000μF Operating Junction Temperature Range ...... -40℃ to +125℃ Operating Ambient Temperature Range......... -40℃ to +85℃ SG Micro Corp www.sg-micro.com OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. OCTOBER 2021 2 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 PIN CONFIGURATION SGM6611A/SGM6611B (TOP VIEW) SW 10 BOOT 2 9 VIN FB 3 8 ILIM COMP 4 7 EN FSW 1 VCC 11 5 6 GND VOUT TQFN-2×2.5-11L PIN DESCRIPTION PIN NAME I/O FUNCTION 1 FSW I The switching frequency is programmed by a resistor between this pin and the GND pin. 2 VCC O Output of the Internal Regulator. The VCC pin connects a ceramic capacitor (> 1.0μF) to ground. 3 FB I Output Voltage Feedback. 4 COMP O Output of the Internal Error Amplifier. Connect a loop compensation network between this pin and the GND pin. 5 GND - Ground. 6 VOUT O Boost Converter Output. 7 EN I 8 ILIM O 9 VIN I 10 BOOT O 11 SW I Enable Logic Input. Logic high makes the circuit enabled, and logic low makes it disabled and the device enters shutdown mode. Adjustable Switch Peak Current Limit. Connect an external resistor between this pin and the GND pin. IC Power Supply Input. Power Supply for High-side MOSFET Gate Driver. Strongly recommend to connect a capacitor between this pin and the SW pin. Switching Node Pin. Connect to the drain of the internal low-side power MOSFET and the source of the internal high-side power MOSFET. NOTE: I = input, O = output. SG Micro Corp www.sg-micro.com OCTOBER 2021 3 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 ELECTRICAL CHARACTERISTICS (VIN = 2.7V to 5.5V, VOUT = 9V, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN Full 2.7 TYP MAX UNITS 12 V Power Supply Input Voltage Range VIN VIN Under-Voltage Lockout Threshold VIN_UVLO VIN Under-Voltage Lockout Hysteresis VIN_HYS VCC Regulation VCC VCC Under-Voltage Lockout Threshold Operating Quiescent Current VIN Pin VOUT Pin Shutdown Current into the VIN Pin VCC_UVLO IQ ISHDN VIN rising VIN falling 2.5 +25℃ 2.62 2.4 V +25℃ 100 mV ICC = 2mA, VIN = 8V +25℃ 5 V VCC falling +25℃ IC enabled, no load, VFB = 1.3V, VOUT = 12V +25℃ IC disabled +25℃ 2.1 V 0.23 0.4 90 130 0.6 1.1 μA 12.6 V μA Output Output Voltage Range VOUT Reference Voltage at the FB Pin VREF Leakage Current into the FB Pin PWM mode Full 4.5 Full 1.181 1.205 1.229 V PFM mode +25℃ 1.207 IFB_LKG VFB = 1.2V +25℃ 10 100 nA Output Over-Voltage Protection Threshold VOVP VOUT rising Full 13.2 13.55 V Output Over-Voltage Protection Hysteresis VOVP_HYS Soft Startup Time 12.95 VOUT falling below VOVP +25℃ 0.15 V tSS COUT (effective) = 47μF, IOUT = 0A +25℃ 4 ms Error Amplifier COMP Pin Sink Current ISINK VFB = VREF + 100mV, VCOMP = 1.2V +25℃ 120 μA COMP Pin Source Current ISOURCE VFB = VREF - 100mV, VCOMP = 1.2V +25℃ 15 μA High Clamp Voltage at the COMP Pin VCCLPH VFB = 1.1V, RILIM = 127kΩ +25℃ 2.0 V Low Clamp Voltage at the COMP Pin VCCLPL Error Amplifier Transconductance GEA VFB = 1.3V, RILIM = 127kΩ +25℃ 0.4 V VCOMP = 1.2V +25℃ 135 μS VCC = 5V +25℃ 27 34 mΩ VCC = 5V +25℃ 15 20 mΩ 470 500 Power Switch High-side MOSFET On-Resistance Low-side MOSFET On-Resistance RDS(ON) Switching Frequency Switching Frequency Minimum On-Time fSW tON_MIN RFREQ = 301kΩ +25℃ RFREQ = 46.4kΩ +25℃ 440 2200 kHz kHz VCC = 5V +25℃ 120 ns RILIM = 127kΩ +25℃ Current Limit Switch Peak Current Limit (SGM6611A) ILIM Reference Voltage at the ILIM Pin VILIM +25℃ EN Logic High Threshold VENH Full EN Logic Low Threshold VENL Full EN Pull-Down Resistor REN +25℃ 8.5 9.5 10.8 1.205 A V EN Logic Input 1.2 V 0.4 V 800 kΩ TA rising 160 ℃ TA falling below TSD 20 ℃ Thermal Shutdown Thermal Shutdown Threshold TSD Thermal Shutdown Hysteresis TSD_HYS SG Micro Corp www.sg-micro.com OCTOBER 2021 4 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VIN = 3.6V, VOUT = 9V, unless otherwise noted. Efficiency vs. Output Current 100 90 VIN = 3.6V 80 SGM6611A Efficiency (%) 70 60 50 40 30 10 0.001 0.01 0.1 1 SGM6611A 70 60 50 40 30 VOUT = 5V VOUT = 9V VOUT = 12V 20 0 0.0001 VOUT = 9V 90 80 Efficiency (%) Efficiency vs. Output Current 100 VIN = 3V VIN = 3.6V VIN = 4.2V 20 10 0.0001 10 0.001 Efficiency vs. Output Current 90 VIN = 3.6V 10 VOUT = 9V 90 80 70 70 60 Efficiency (%) Efficiency (%) 1 Efficiency vs. Output Current 100 80 SGM6611B 50 40 30 VOUT = 5V VOUT = 9V VOUT = 12V 20 10 0 0.0001 0.001 0.01 0.1 1 SGM6611B 60 50 40 30 20 VIN = 3V VIN = 3.6V VIN = 4.2V 10 0 0.0001 10 Output Current (A) 0.001 0.01 0.1 1 10 Output Current (A) Current Limit vs. Setting Resistance Switching Frequency vs. Setting Resistance 12 2500 10 2000 Frequency (kHz) Current Limit (A) 0.1 Output Current (A) Output Current (A) 100 0.01 8 6 4 1500 1000 500 2 120 160 200 240 280 Resistance (kΩ) SG Micro Corp www.sg-micro.com 320 360 400 0 0 100 200 300 400 500 600 700 800 900 Resistance (kΩ) OCTOBER 2021 5 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 TYPICAL PERFORMANCE CHARACTERISTICS (continued) At TA = +25℃, VIN = 3.6V, VOUT = 9V, unless otherwise noted. Quiescent Current vs. Temperature 160 0.9 140 0.8 120 Quiescent Current (μA) Shutdown Current (μA) Shutdown Current vs. Temperature 1.0 0.7 0.6 0.5 0.4 0.3 100 80 60 40 20 0.2 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 80 Temperature (℃) Reference Voltage vs. Temperature Switching Waveforms in PFM Mode 1.215 VOUT AC Coupled 1.210 1A/div 1.205 IL 1.200 100 50mV/div 1.220 1.195 5V/div Reference Votlage (V) 60 Temperature (℃) 1.190 VSW 1.185 VIN = 3.6V, VOUT = 9V, IOUT = 200mA 1.180 -40 -20 0 20 40 60 80 Temperature (℃) SG Micro Corp www.sg-micro.com 100 120 140 Time (1μs/div) OCTOBER 2021 6 12.6V, 7A Fully-Integrated Synchronous Boost Converter SGM6611 TYPICAL PERFORMANCE CHARACTERISTICS (continued) At TA = +25℃, VIN = 3.6V, VOUT = 9V, unless otherwise noted. Switching Waveforms in DCM Switching Waveforms in CCM VOUT IL 5V/div 5V/div VSW AC Coupled VOUT 2A/div 500mA/div IL 100mV/div 10mV/div AC Coupled VSW VIN = 3.6V, VOUT = 9V, IOUT = 2A VIN = 3.6V, VOUT = 9V, IOUT = 20mA Time (1μs/div) Time (1μs/div) Load Transient Response Line Transient Response 500mV/div 500mA/div IOUT VIN AC Coupled VOUT VIN = 3.6V, VOUT = 9V, IOUT = 1A to 2A 200mV/div 500mV/div AC Coupled VOUT VIN = 3.3V to 4V, VOUT = 9V, IOUT = 2A Time (500μs/div) Time (500μs/div) Startup Waveforms Shutdown Waveforms 2A/div IL 2V/div VOUT 1V/div 2V/div VOUT 1V/div VEN VEN 2A/div IL Time (1ms/div) SG Micro Corp www.sg-micro.com Time (50μs/div) OCTOBER 2021 7 SGM6611 12.6V, 7A Fully-Integrated Synchronous Boost Converter PCB LAYOUT Figure 1. Layout Example SG Micro Corp www.sg-micro.com OCTOBER 2021 8 SGM6611 12.6V, 7A Fully-Integrated Synchronous Boost Converter REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. OCTOBER 2021 ‒ REV.A.2 to REV.A.3 Page Updated the Enable and Disable section ............................................................................................................................................................. 9 Added the Figure 5. Layout Example ................................................................................................................................................................. 15 APRIL 2021 ‒ REV.A.1 to REV.A.2 Page Updated Loop Stability section .......................................................................................................................................................................... 14 MARCH 2021 ‒ REV.A to REV.A.1 Page Updated Package Outline Dimensions section .................................................................................................................................................. 17 Changes from Original (JULY 2018) to REV.A Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com OCTOBER 2021 9 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS TQFN-2×2.5-11L E L1 L1 N10 N7 L N6 e1 D N11 N5 b1 b2 b (0.18) N4 PIN 1# N1 b 1/2 e e BOTTOM VIEW TOP VIEW 2.40 0.40 1.00 2.90 A 1.80 1.00 0.38 1.00 0.70 0.35 0.25 A1 A2 0.55 SIDE VIEW 0.25 0.50 RECOMMENDED LAND PATTERN (Unit: mm) Symbol Dimensions In Millimeters MIN MOD MAX A 0.700 0.750 0.800 A1 0.000 0.020 0.050 A2 0.203 REF D 2.400 2.500 2.600 E 1.900 2.000 2.100 e 0.500 BSC e1 0.700 BSC b 0.200 0.250 0.300 b1 0.300 0.350 0.400 b2 0.950 1.000 1.050 L 0.300 0.350 0.400 L1 0.750 0.800 0.850 NOTE: This drawing is subject to change without notice. SG Micro Corp www.sg-micro.com TX00150.001 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant TQFN-2×2.5-11L 7″ 9.5 2.20 2.70 0.95 4.0 4.0 2.0 8.0 Q2 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000