SGM8051/SGM8052/SGM8053
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
GENERAL DESCRIPTION
FEATURES
The SGM8051/3 (single), SGM8052/5 (dual) and
● Low Cost
SGM8054 (quad) are low cost, high speed, rail-to-rail
● Rail-to-Rail Output
output, voltage feedback amplifiers. They have a wide
● Input Offset Voltage: 8mV (MAX)
input common mode voltage range and output voltage
● High Speed:
swing, making them easy to be used on single supply
-3dB Bandwidth (G = +1): 250MHz
as low as 2.5V.
Slew Rate: 130V/μs
Despite being low cost, the SGM8051 series provide
excellent overall performance. They offer wide bandwidth
to 250MHz (G = +1) along with 0.1dB flatness out to
37MHz (G = +2) and offer a typical low current
consumption of 2.3mA/amplifier.
Low distortion and fast settling make the SGM8051
series ideal for buffering high speed A/D or D/A
converters. The SGM8053/5 have a power-down
disable feature that reduces the supply current to 75μA.
This feature makes the SGM8053/5 ideal for portable
and battery-powered applications where power dissipation
is critical. All are specified over the extended -40℃ to
Settling Time to 0.1% with 2V Step: 58ns
● Supply Voltage Range: 2.5V to 5.5V
● Input Voltage Range: -0.2V to 3.8V with VS = 5V
● Excellent Video Specs (RL = 150Ω, G = +2):
0.1dB Gain Flatness: 37MHz
Diff Gain: 0.03%, Diff Phase: 0.08°
● Low Supply Current:
2.3mA/Amplifier (TYP)
75μA Shutdown Current for SGM8053/5
● Small Packaging:
SGM8051 Available in SOT-23-5 and SOIC-8
Packages
SGM8052 Available in MSOP-8 and SOIC-8
+125℃ temperature range.
Packages
APPLICATIONS
Packages
Imaging
Packages
Photodiode Preamp
Professional Video and Camera
SGM8053 Available in SOT-23-6 and SOIC-8
SGM8054 Available in TSSOP-14 and SOIC-14
SGM8055 Available in a MSOP-10 Package
Small-Signal Frequency Response
Hand Set
3
DVD/CD
0
A-to-D Driver
Normalized Gain (dB)
Base Station
Filter
VOUT = 0.1VP-P
G = +1
RL = 1kΩ
RF = 24Ω
-3
-6
G = +2
RL = 150Ω
RF = 887Ω
-9
-12
-15
1
10
100
1000
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
JUNE 2017 – REV. E. 1
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
PACKAGE/ORDERING INFORMATION
MODEL
SGM8051
SGM8052
CHANNEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SOT-23-5
-40℃ to +125℃
SGM8051XN5/TR
8051
Tape and Reel, 3000
SOIC-8
-40℃ to +125℃
SGM8051XS/TR
SGM8051XS
XXXXX
Tape and Reel, 2500
MSOP-8
-40℃ to +125℃
SGM8052XMS/TR
SGM8052
XMS
XXXXX
Tape and Reel, 3000
SOIC-8
-40℃ to +125℃
SGM8052XS/TR
SGM8052XS
XXXXX
Tape and Reel, 2500
SOT-23-6
-40℃ to +125℃
SGM8053XN6/TR
SOFXX
Tape and Reel, 3000
SOIC-8
-40℃ to +125℃
SGM8053XS/TR
SGM8053XS
XXXXX
Tape and Reel, 2500
SOIC-14
-40℃ to +125℃
SGM8054XS14/TR
Single
Dual
Single
SGM8053
with Shutdown
SGM8054
SGM8055
Quad
Dual
with Shutdown
TSSOP-14
-40℃ to +125℃ SGM8054XTS14/TR
MSOP-10
-40℃ to +125℃
SGM8055XMS/TR
SGM8054XS14
Tape and Reel, 2500
XXXXX
SGM8054
XTS14
XXXXX
SGM8055
XMS
XXXXX
Tape and Reel, 3000
Tape and Reel, 3000
MARKING INFORMATION
NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code.
SOT-23-6
SOIC-8/MSOP-8/SOIC-14/TSSOP-14/MSOP-10
XXXXX
YYY X X
Date Code - Month
Date Code - Year
Serial Number
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
SG Micro Corp
www.sg-micro.com
JUNE 2017
2
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
ABSOLUTE MAXIMUM RATINGS
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
OVERSTRESS CAUTION
Supply Voltage, +VS to -VS ................................................ 6V
Input Common Mode Voltage Range
.................................................... (-VS) - 0.1V to (+VS) + 0.1V
Signal Input Terminals Voltage Range
.................................................... (-VS) - 0.3V to (+VS) + 0.3V
Package Thermal Resistance @ TA = +25℃
SOT-23-5, θJA .......................................................... 190℃/W
SOT-23-6, θJA .......................................................... 190℃/W
SOIC-8, θJA... ........................................................... 125℃/W
MSOP-8, θJA ............................................................ 216℃/W
MSOP-10, θJA .......................................................... 216℃/W
Junction Temperature .................................................+150℃
Storage Temperature Range ....................... -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................+260℃
ESD Susceptibility
HBM ............................................................................. 1000V
MM ................................................................................. 400V
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
RECOMMENDED OPERATING CONDITIONS
DISCLAIMER
Operating Temperature Range ..................... -40℃ to +125℃
SG Micro Corp
www.sg-micro.com
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
ESD SENSITIVITY CAUTION
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
JUNE 2017
3
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
PIN CONFIGURATIONS
SGM8051 (TOP VIEW)
OUT
1
-VS
2
+IN
3
5
+
SGM8053 (TOP VIEW)
+VS
OUT
1
-VS
2
+IN
3
_
4
-IN
+
_
6
+VS
5
DISABLE
4
-IN
SOT-23-5
SOT-23-6
SGM8052 (TOP VIEW)
SGM8051/8053 (TOP VIEW)
OUTA
1
-INA
2
_
+INA
3
+
-VS
4
8
+VS
NC
1
7
OUTB
-IN
2
_
6
-INB
+IN
3
+
5
+INB
-VS
4
8
DISABLE
(SGM8053 ONLY)
_
7
+VS
+
6
OUT
5
NC
NC = NO CONNECT
SOIC-8/MSOP-8
SOIC-8
SGM8054 (TOP VIEW)
OUTA
1
-INA
2
_
+INA
3
+
+VS
4
+INB
5
+
-INB
6
_
OUTB
7
14
OUTD
_
13
-IND
+
12
+IND
11
-VS
+
10
+INC
_
9
-INC
8
OUTC
SGM8055 (TOP VIEW)
OUTA
1
-INA
2
_
+INA
3
+
-VS
4
DISABLE
5
10
+VS
9
OUTB
_
8
-INB
+
7
+INB
6
DISABLE
MSOP-10
TSSOP-14/SOIC-14
SG Micro Corp
www.sg-micro.com
JUNE 2017
4
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
ELECTRICAL CHARACTERISTICS
(VS = 5V, G = +2, RF = 887Ω, RL = 150Ω, unless otherwise noted.)
SGM8051/2/3/4/5
PARAMETER
CONDITIONS
TYP
+25℃
Dynamic Performance
-3dB Small-Signal Bandwidth
MIN/MAX OVER TEMPERATURE
+25℃
0℃
-40℃
-40℃
UNITS
to +70℃ to +85℃ to +125℃
MIN/
MAX
Settling Time to 0.1%
Overload Recovery Time
180
G = +1, VOUT = 0.1VP-P, RF = 24Ω, RL = 150Ω
250
G = +1, VOUT = 0.1VP-P, RF = 24Ω, RL = 1kΩ
40
G = +2, VOUT = 0.1VP-P, RL = 50Ω
80
G = +2, VOUT = 0.1VP-P, RL = 150Ω
130
G = +2, VOUT = 0.1VP-P, RL = 1kΩ
160
G = +2, VOUT = 0.1VP-P, RL = 10kΩ
90
G = +10, RL = 150Ω
120
G = +10, RL = 1kΩ
37
G = +2, VOUT = 0.1VP-P, RL = 150Ω, RF = 887Ω
93/-118
G = +1, 2V output step
116/-103
G = +2, 2V output step
130/-130
G = +2, 4V output step
4
G = +2, VOUT = 0.2VP-P, 10% to 90%
14
G = +2, VOUT = 2VP-P, 10% to 90%
58
G = +2, 2V output step
VIN · G = +VS
18
Noise/Distortion Performance
Input Voltage Noise Density
Differential Gain Error (NTSC)
Differential Phase Error (NTSC)
f = 1MHz
G = +2, RL = 150Ω
G = +2, RL = 150Ω
8.1
0.03
0.08
±8
±8.9
±9.5
±9.8
VOUT = 0.3V to 4.7V, RL = 150Ω
VOUT = 0.2V to 4.8V, RL = 1kΩ
±2
4.4
6
2
80
104
75
92
74
91
74
91
73
80
mV
μV/℃
pA
pA
dB
dB
-0.2 to 3.8
80
66
65
65
62
V
dB
TYP
MIN
V
V
mA
Ω
TYP
TYP
MIN
TYP
ns
ns
V
V
pA
TYP
TYP
MAX
MIN
TYP
Gain-Bandwidth Product
Bandwidth for 0.1dB Flatness
Slew Rate
Rise-and-Fall Time
DC Performance
Input Offset Voltage (VOS)
Input Offset Voltage Drift
Input Bias Current (IB)
Input Offset Current (IOS)
Open-Loop Gain (AOL)
Input Characteristics
Input Common Mode Voltage Range (VCM)
Common Mode Rejection Ratio (CMRR)
Output Characteristics
Output Voltage Swing from Rail
Output Current
Closed-Loop Output Impedance
VCM = -0.1V to 3.5V
RL = 150Ω
RL = 1kΩ
f < 100kHz
Power-Down
(SGM8053/5 Only)
Turn-On Time
Turn-Off Time
DISABLE Voltage-Off
DISABLE Voltage-On
Output Leakage Current (IOFF) (SGM8055 Only) DISABLE = 0V, VS = 5V, VOUT = 5V
0.12
0.03
130
0.08
236
52
50
Power Supply
Operating Voltage Range
Quiescent Current (per Amplifier)
Supply Current when Disabled per Amplifier
(SGM8053/5 only)
Power Supply Rejection Ratio (PSRR)
SG Micro Corp
www.sg-micro.com
VS = 2.7V to 5.5V, VCM = (-VS) + 0.5V
100
95
90
84
0.8
2
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
V/μs
V/μs
V/μs
ns
ns
ns
ns
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
TYP
nV/ Hz
%
degree
TYP
TYP
TYP
MAX
TYP
TYP
TYP
MIN
MIN
2.3
75
2.5
5.5
3.2
120
2.7
5.5
3.4
127
2.7
5.5
3.8
130
2.7
5.5
4
137
V
V
mA
μA
MIN
MAX
MAX
MAX
80
67
67
65
62
dB
MIN
JUNE 2017
5
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS
At TA = +25℃, VS = 5V, G = +2, RF = 887Ω, RG = 887Ω and RL = 150Ω connected to VS/2, unless otherwise noted.
Non-Inverting Small-Signal Frequency Response
3
VOUT = 0.1VP-P
G = +1
RF = 24Ω
G = +2
-6
G = +5
-9
G = +10
-12
-15
1
10
100
VOUT = 0.1VP-P
0
Normalized Gain (dB)
Normalized Gain (dB)
0
-3
Inverting Small-Signal Frequency Response
3
-3
G = -2
-6
G = -5
-9
G = -10
-12
-15
1000
G = -1
0.1
1
10
Frequency (MHz)
Frequency Response for Various RL
0.1dB Gain Flatness for Various RF
0.5
RL = 10kΩ
RL = 1kΩ
-6
RL = 150Ω
-9
RL = 50Ω
-12
0.3
Normalized Gain (dB)
Normalized Gain (dB)
-3
-15
VOUT = 0.1VP-P
CL = 0pF
0.4
CL = 0pF
VOUT = 0.1VP-P
0.2
RF = 1kΩ
0.1
0
-0.1
RF = 900Ω
-0.2
RF = 887Ω
-0.3
-0.4
1
10
100
-0.5
1000
1
10
Frequency (MHz)
RS = 0Ω
VOUT = 0.1VP-P
Frequency Response vs. Capacitive Load
3
CL = 100pF
CL = 47pF
3
0
-3
CL = 6pF
-6
-9
-12
1
10
100
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
VOUT = 0.1VP-P
CL = 6pF
RS = 100Ω
0
Normalized Gain (dB)
Normalized Gain (dB)
6
100
Frequency (MHz)
Frequency Response for Various CL
9
-15
1000
Frequency (MHz)
3
0
100
1000
CL = 100pF
RS = 37.4Ω
-3
CL = 47pF
RS = 66.5Ω
-6
-9
-12
-15
1
10
100
1000
Frequency (MHz)
JUNE 2017
6
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, VS = 5V, G = +2, RF = 887Ω, RG = 887Ω and RL = 150Ω connected to VS/2, unless otherwise noted.
Large-Signal Disable/Enable Response
Output Voltage (1V/div)
6
5
5
Disable Voltage (V)
4
3
2
Disabled
VOUT = 2V
1
Output Voltage (VP-P)
VS = 5V
G = +2
fIN = 2MHz
Enabled
Maximum Output Voltage vs. Frequency
6
Maximum Output Voltage
Without Slew-Rate
Induced Distortion
VS = 5.5V
4
3
VS = 2.7V
2
0
1
-1
0
Time (500ns/div)
1
10
100
Frequency (MHz)
Non-Inverting Large-Signal Step Response
Output Voltage (50mV/div)
Output Voltage (500mV/div)
Non-Inverting Small-Signal Step Response
Time (50ns/div)
Time (50ns/div)
Rail-to-Rail
Disabled Output Isolation Frequency Response
0
G = +2, RF = 887Ω, RL = 1kΩ
Disabled Isolation (dB)
4.88V
0V
VOUT = 0.2VP-P
VDISABLE = 0V
RL = 1kΩ
-10
-20
-30
-40
-50
-60
-70
-80
-90
Time (200ns/div)
SG Micro Corp
www.sg-micro.com
1
10
100
1000
Frequency (MHz)
JUNE 2017
7
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, VS = 5V, G = +2, RF = 887Ω, RG = 887Ω and RL = 150Ω connected to VS/2, unless otherwise noted.
Closed-Loop Output Impedance vs. Frequency
Power Supply Rejection Ratio vs. Frequency
100
-20
PSRR (dB)
0
Output Impedance (Ω)
1000
10
1
-PSRR
-40
-60
+PSRR
-80
0.1
0.01
0.01
0.1
1
10
100
-100
0.01
0.1
Output Settling Time to 0.1%
1000
Common Mode Rejection Ratio vs. Frequency
-20
0.3
0.2
CMRR (dB)
Output Error (%)
100
0
VOUT = 2VP-P
0.4
10
Frequency (MHz)
Frequency (MHz)
0.5
1
0.1
0
-0.1
-40
-60
-0.2
-80
-0.3
-0.4
-0.5
0
20
40
60
80
100
120
-100
0.01
Time (ns)
1
10
100
1000
Frequency (MHz)
Input Voltage Noise Density vs. Frequency
Input Voltage Noise Density (nV/√Hz)
0.1
Overload Recovery Time
1000
VS = ±2.5V
VIN = 1.18V
G = +2
2.5V
100
1.18V
0V
10
1
0.01
0.1
1
10
100
1000
10000
Time (25ns/div)
Frequency (kHz)
SG Micro Corp
www.sg-micro.com
JUNE 2017
8
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, VS = 5V, G = +2, RF = 887Ω, RG = 887Ω and RL = 150Ω connected to VS/2, unless otherwise noted.
Open-Loop Gain vs. Temperature
CMRR and PSRR vs. Temperature
120
110
100
RL = 150Ω
90
100
80
70
RL = 150Ω
110
RL = 1kΩ
CMRR, PSRR (dB)
Open-Loop Gain (dB)
120
PSRR
90
80
CMRR
70
-50
-25
0
25
50
75
100
125
60
150
-50
-25
0
Temperature (℃)
75
2.8
VS = 5V
65
VS = 3V
60
VS = 2.7V
55
50
45
40
50
75
100
125
150
Quiescent Current vs. Temperature
3
Quiescent Current (mA)
Shutdown Current (μA)
Shutdown Current vs. Temperature
80
70
25
Temperature (℃)
2.6
VS = 5V
VS = 3V
2.4
2.2
2
VS = 2.7V
1.8
1.6
1.4
-50
-25
0
25
50
75
100
125
1.2
150
-50
-25
0
Temperature (℃)
25
50
75
100
125
150
Temperature (℃)
Output Voltage Swing vs. Output Current
Output Voltage Swing vs. Output Current
5
3
Sourcing Current
+25℃
-50℃
Output Voltage (V)
4
Output Voltage (V)
2.5
+135℃
Sourcing Current
3
VS = 5V
2
+25℃
1
0
-50℃
Sinking Current
25
50
75
100
Output Current (mA)
SG Micro Corp
www.sg-micro.com
125
150
+25℃
-50℃
1.5
VS = 3V
1
0
+25℃
+135℃
0.5
+135℃
0
+135℃
2
-50℃
Sinking Current
0
20
40
60
80
100
120
Output Current (mA)
JUNE 2017
9
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
At TA = +25℃, VS = 5V, G = +2, RF = 887Ω, RG = 887Ω and RL = 150Ω connected to VS/2, unless otherwise noted.
Offset Voltage Production Distribution
24
-30
21
Percentage of Amplifiers (%)
Channel Separation (dB)
Channel Separation vs. Frequency
-20
-40
-50
-60
-70
-80
-90
-100
-110
-120
0.1
1
10
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
100
1000
18
Typical Production
Distribution of
Packaged Units.
15
12
9
6
3
0
-8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8
Offset Voltage (mV)
JUNE 2017
10
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
APPLICATION NOTES
Driving Capacitive Loads
The SGM8051 series are optimized for bandwidth and
speed, not for driving capacitive loads. Output
capacitance will create a pole in the amplifier’s
feedback path, leading to excessive peaking and
potential oscillation. If dealing with load capacitance is
a requirement of the application, the two strategies to
consider are (1) using a small resistor in series with the
amplifier’s output and the load capacitance and (2)
reducing the bandwidth of the amplifier’s feedback loop
by increasing the overall noise gain.
Figure 1 shows a unity gain follower using the series
resistor strategy. The resistor isolates the output from
the capacitance and, more importantly, creates a zero
in the feedback path that compensates for the pole
created by the output capacitance.
For the high speed operational amplifier, soldering the
part to the board directly is strongly recommended. Try
to keep the high frequency current loop area small to
minimize the EMI (electromagnetic interference).
+VS
+VS
10μF
10μF
0.1μF
0.1μF
VN
VN
SGM8051
VOUT
VOUT
SGM8051
VP
10μF
VP
0.1μF
-VS (GND)
-VS
SGM8051
VIN
Figure 2. Amplifier with Bypass Capacitors
RISO
VOUT
CLOAD
Figure 1. Series Resistor Isolating Capacitive Load
Power-Supply Bypassing and Layout
The SGM8051 series operate from either a single 2.7V
to 5.5V supply or dual ±1.35V to ±2.75V supplies. For
single-supply operation, bypass the power supply +VS
with a 0.1µF ceramic capacitor which should be placed
close to the +VS pin. For dual-supply operation, both
the +VS and the -VS supplies should be bypassed to
ground with separate 0.1µF ceramic capacitors. 2.2µF
tantalum capacitor can be added for better performance.
Grounding
A ground plane layer is important for high speed circuit
design. The length of the current path in an inductive
ground return will create an unwanted voltage noise.
Broad ground plane areas will reduce the parasitic
inductance.
Input-to-Output Coupling
To minimize capacitive coupling, the input and output
signal traces should not be in parallel. This helps
reduce unwanted positive feedback.
Good PC board layout techniques optimize performance
by decreasing the amount of stray capacitance at the
operational amplifier’s inputs and output. To decrease
stray capacitance, minimize trace lengths and widths
by placing external components as close to the device
as possible. Use surface-mount components whenever
possible.
SG Micro Corp
www.sg-micro.com
JUNE 2017
11
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
TYPICAL APPLICATION CIRCUITS
Differential Amplifier
The circuit shown in Figure 3 performs the difference
function. If the resistor ratios are equal (R4/R3 = R2/R1),
then VOUT = (VP - VN) × R2/R1 + VREF.
The SGM8051 series can be used in video applications
as shown in Figure 5.
VIN
R2
VN
Driving Video
SGM8051
75Ω
R1
SGM8051
75Ω
CABLE
VOUT
VP
RF
VOUT
RG
R3
75Ω
R4
G = 1 + RF/RG
VREF
Figure 3. Differential Amplifier
Figure 5. Typical Video Driving
Active Low-Pass Filter
The low-pass filter shown in Figure 4 has a DC gain of
(-R2/R1) and the -3dB corner frequency is 1/2πR2C.
Make sure the filter bandwidth is within the bandwidth
of the amplifier. Feedback resistors with large values
can couple with parasitic capacitance and cause
undesired effects such as ringing or oscillation in
high-speed amplifiers. Keep resistor values as low as
possible and consistent with output loading consideration.
C
R2
R1
VIN
SGM8051
VOUT
R3 = R1 // R2
Figure 4. Active Low-Pass Filter
SG Micro Corp
www.sg-micro.com
JUNE 2017
12
SGM8051/SGM8052/SGM8053/4/5
SGM8054/SGM8055
250MHz, Rail-to-Rail Output,
CMOS Operational Amplifiers
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
JUNE 2017 ‒ REV.E to REV.E.1
Page
Changed Package/Ordering Information section .................................................................................................................................................. 2
Updated Electrical Characteristics section ........................................................................................................................................................... 2
Changed Absolute Maximum Ratings section ...................................................................................................................................................... 3
MAY 2014 ‒ REV.D.4 to REV.E
Page
Changed Package/Ordering Information section .................................................................................................................................................. 2
JANUARY 2013 ‒ REV.D.3 to REV.D.4
Page
Updated Package Outline Dimensions section .......................................................................................................................................... 12 ~ 18
Added Tape and Reel Information section ................................................................................................................................................... 19, 20
SG Micro Corp
www.sg-micro.com
JUNE 2017
13
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-5
1.90
D
e1
E1
2.59
E
0.99
b
e
0.69
0.95
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
c
0.2
Dimensions
In Inches
MIN
MAX
A
1.050
1.250
0.041
0.049
A1
0.000
0.100
0.000
0.004
A2
1.050
1.150
0.041
0.045
b
0.300
0.500
0.012
0.020
c
0.100
0.200
0.004
0.008
D
2.820
3.020
0.111
0.119
E
1.500
1.700
0.059
0.067
E1
2.650
2.950
0.104
0.116
e
0.950 BSC
0.037 BSC
e1
1.900 BSC
0.075 BSC
SG Micro Corp
www.sg-micro.com
L
0.300
0.600
0.012
0.024
θ
0°
8°
0°
8°
TX00033.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-6
D
e1
e
2.59
E
E1
0.99
b
0.95
0.69
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
c
0.2
Dimensions
In Inches
MIN
MAX
A
1.050
1.250
0.041
0.049
A1
0.000
0.100
0.000
0.004
A2
1.050
1.150
0.041
0.045
b
0.300
0.500
0.012
0.020
c
0.100
0.200
0.004
0.008
D
2.820
3.020
0.111
0.119
E
1.500
1.700
0.059
0.067
E1
2.650
2.950
0.104
0.116
e
0.950 BSC
0.037 BSC
e1
1.900 BSC
0.075 BSC
SG Micro Corp
www.sg-micro.com
L
0.300
0.600
0.012
0.024
θ
0°
8°
0°
8°
TX00034.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-8
0.6
D
e
2.2
E1
E
5.2
b
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
c
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
A
1.350
1.750
0.053
0.069
A1
0.100
0.250
0.004
0.010
A2
1.350
1.550
0.053
0.061
b
0.330
0.510
0.013
0.020
c
0.170
0.250
0.006
0.010
D
4.700
5.100
0.185
0.200
E
3.800
4.000
0.150
0.157
E1
5.800
6.200
0.228
0.244
e
SG Micro Corp
www.sg-micro.com
1.27 BSC
0.050 BSC
L
0.400
1.270
0.016
0.050
θ
0°
8°
0°
8°
TX00010.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-8
b
E1
E
4.8
1.02
e
0.41
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
A1
c
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
A
0.820
1.100
0.032
0.043
A1
0.020
0.150
0.001
0.006
A2
0.750
0.950
0.030
0.037
b
0.250
0.380
0.010
0.015
c
0.090
0.230
0.004
0.009
D
2.900
3.100
0.114
0.122
E
2.900
3.100
0.114
0.122
E1
4.750
5.050
0.187
0.199
e
SG Micro Corp
www.sg-micro.com
0.650 BSC
0.026 BSC
L
0.400
0.800
0.016
0.031
θ
0°
6°
0°
6°
TX00014.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-10
b
E1
4.8
E
1.02
e
0.5
0.3
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
θ
c
A1
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
A
0.820
1.100
A1
0.020
A2
0.750
b
0.180
Dimensions
In Inches
MIN
MAX
0.032
0.043
0.150
0.001
0.006
0.950
0.030
0.037
0.280
0.007
0.011
c
0.090
0.230
0.004
0.009
D
2.900
3.100
0.114
0.122
E
2.900
3.100
0.114
0.122
E1
4.750
5.050
0.187
e
SG Micro Corp
www.sg-micro.com
0.500 BSC
0.199
0.020 BSC
L
0.400
0.800
0.016
0.031
θ
0°
6°
0°
6°
TX00015.000
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-14
D
E
5.2
E1
2.2
e
b
0.6
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L1
R1
R
A3
A A2
h
L2
θ
A1
Symbol
h
L
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
A
1.35
1.75
0.053
0.069
A1
0.10
0.25
0.004
0.010
A2
1.25
1.65
0.049
0.065
A3
0.55
0.75
0.022
0.030
b
0.36
0.49
0.014
0.019
D
8.53
8.73
0.336
0.344
E
5.80
6.20
0.228
0.244
E1
3.80
4.00
0.150
e
L
1.27 BSC
0.45
L1
0.80
0.018
1.04 REF
L2
0.157
0.050 BSC
0.032
0.040 REF
0.25 BSC
0.01 BSC
R
0.07
0.003
R1
0.07
0.003
h
0.30
0.50
0.012
0.020
θ
0°
8°
0°
8°
SG Micro Corp
www.sg-micro.com
TX00011.001
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TSSOP-14
D
E
E1
5.94
1.78
e
b
0.42
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
1.200
0.047
A
A1
c
H
0.050
0.150
0.002
0.006
A2
0.800
1.050
0.031
0.041
b
0.190
0.300
0.007
0.012
c
0.090
0.200
0.004
0.008
D
4.860
5.100
0.191
0.201
E
4.300
4.500
0.169
0.177
E1
6.250
6.550
0.246
0.258
0.700
0.02
e
L
0.650 BSC
0.500
H
θ
SG Micro Corp
www.sg-micro.com
0.026 BSC
0.25 TYP
1°
0.028
0.01 TYP
7°
1°
7°
TX00019.001
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
W
P0
Q1
Q2
Q1
Q2
Q1
Q2
Q3
Q4
Q3
Q4
Q3
Q4
B0
Reel Diameter
K0
A0
P1
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel
Diameter
Reel Width
W1
(mm)
A0
(mm)
B0
(mm)
K0
(mm)
P0
(mm)
P1
(mm)
P2
(mm)
W
(mm)
Pin1
Quadrant
SOT-23-5
7″
9.5
3.20
3.20
1.40
4.0
4.0
2.0
8.0
Q3
SOT-23-6
7″
9.5
3.17
3.23
1.37
4.0
4.0
2.0
8.0
Q3
SOIC-8
13″
12.4
6.40
5.40
2.10
4.0
8.0
2.0
12.0
Q1
MSOP-8
13″
12.4
5.20
3.30
1.50
4.0
8.0
2.0
12.0
Q1
MSOP-10
13″
12.4
5.20
3.30
1.20
4.0
8.0
2.0
12.0
Q1
SOIC-14
13″
16.4
6.60
9.30
2.10
4.0
8.0
2.0
16.0
Q1
TSSOP-14
13″
12.4
6.95
5.60
1.20
4.0
8.0
2.0
12.0
Q1
SG Micro Corp
www.sg-micro.com
TX10000.000
DD0001
Package Type
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Pizza/Carton
7″ (Option)
368
227
224
8
7″
442
410
224
18
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
DD0002
Reel Type
TX20000.000