SGM8591YN5G/TR

SGM8591 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier GENERAL DESCRIPTION FEATURES The SGM8591 is a single rail-to-rail input and output ● Rail-to-Rail Input and Output Swing precision operational amplifier which has low input ● 2.5V to 5.5V Single Supply Operation offset voltage and bias current. It is guaranteed to ● Voltage Gain: 145dB (TYP) at 5V operate from 2.5V to 5.5V single supply. ● PSRR: 120dB (TYP) The rail-to-rail input and output swings provided by the SGM8591 make both high-side and low-side sensing easy. The combination of characteristics makes the SGM8591 a good choice for temperature, position and pressure sensors, medical equipment and strain gauge amplifiers, or any other 2.5V to 5.5V applications requiring precision and long term stability. The SGM8591 is specified over the extended industrial -40℃ to +85℃ temperature range. It is available in ● CMRR: 90dB (TYP) ● Ultra Low Input Bias Current: 15pA ● Low Supply Current: 445μA at 5V ● Overload Recovery Time: 70μs (at VS = 5V) ● No External Capacitors Required ● -40℃ to +85℃ Operating Temperature Range ● Available in Green SOT-23-5 and SOIC-8 Packages PIN CONFIGURATIONS Green SOT-23-5 and SOIC-8 packages. (TOP VIEW) APPLICATIONS OUT 1 -VS 2 +IN 3 + Temperature Measurement Pressure Sensor Precision Current Sensing +VS 4 -IN _ SOT-23-5 Electronic Scale Strain Gage Amplifier (TOP VIEW) Medical Instrumentation Thermocouple Amplifier 5 NC 1 -IN 2 +IN 3 -VS 4 8 NC _ 7 +VS + 6 OUT 5 NC Handheld Test Equipment NC = NO CONNECT SOIC-8 SG Micro Corp www.sg-micro.com JANUARY 2013 – REV.A Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 PACKAGE/ORDERING INFORMATION MODEL SGM8591 PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SOT-23-5 -40℃ to +85℃ SGM8591YN5G/TR S26XX Tape and Reel, 3000 SOIC-8 -40℃ to +85℃ SGM8591YS8G/TR SGM8591YS8 XXXXX Tape and Reel, 2500 MARKING INFORMATION NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code. SOT-23-5 SOIC-8 XXXXX YYY X X Date Code - Month Date Code - Year Serial Number Vendor Code Date Code - Week Date Code - Year Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS ESD SENSITIVITY CAUTION Supply Voltage ................................................................... 6V Input Voltage Range ................................ -VS to (+VS) + 0.1V Differential Input Voltage Range ............................. -5V to 5V Junction Temperature .................................................+150℃ Storage Temperature Range ....................... -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 4000V MM ................................................................................. 400V This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. RECOMMENDED OPERATING CONDITIONS DISCLAIMER Operating Temperature Range ....................... -40℃ to +85℃ OVERSTRESS CAUTION SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. SG Micro Corp www.sg-micro.com JANUARY 2013 2 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 ELECTRICAL CHARACTERISTICS (VS = 5V, VCM = 2.5V, VOUT = 2.5V, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER CONDITIONS TEMP MIN TYP MAX 150 500 UNITS Input Characteristics +25℃ Input Offset Voltage (VOS) Full 550 μV Input Bias Current (IB) +25℃ 15 pA Input Offset Current (IOS) +25℃ 10 pA Input Voltage Range +25℃ Common Mode Rejection Ratio (1) (CMRR) VCM = 0V to 5V Large-Signal Voltage Gain (AVO) RL = 10kΩ, VOUT = 0.3V to 4.7V Input Offset Voltage Drift (ΔVOS/ΔT) 0 +25℃ 80 Full 62 +25℃ 95 Full 91 Full 5 90 V dB 145 dB 200 nV/℃ Output Characteristics RL = 100kΩ to -VS Output Voltage High (VOH) RL = 10kΩ to -VS RL = 100kΩ to +VS Output Voltage Low (VOL) RL = 10kΩ to +VS Output Short-Circuit Limit (ISC) VOUT = 2.5V, RL = 10Ω to GND +25℃ 4.99 Full 4.979 +25℃ 4.98 Full 4.96 4.998 4.994 2 +25℃ V Full V 10 11 6 +25℃ Full 15 18 +25℃ 40 Full 26 +25℃ 90 Full 73 45 mV mV mA Power Supply Power Supply Rejection Ratio (1) (PSRR) VS = 2.5V to 5.5V Quiescent Current (IQ) VOUT = VS/2 +25℃ 120 445 Full dB 700 845 μA Dynamic Performance Gain-Bandwidth Product (GBP) AV = +100 +25℃ 1.45 MHz Slew Rate (SR) AV = +1, RL = 10kΩ, 2V output step +25℃ 0.75 V/μs Overload Recovery Time AV = -100, RL = 10kΩ, VIN = 200mV (RET to GND) +25℃ 0.07 ms Input Voltage Noise 0.1Hz to 10Hz +25℃ 0.85 μVP-P Input Voltage Noise Density (en) f = 1kHz +25℃ 47.5 nV/ Hz Noise Performance NOTE: 1. PSRR and CMRR are affected by the matching between external gain-setting resistor ratios. SG Micro Corp www.sg-micro.com JANUARY 2013 3 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 ELECTRICAL CHARACTERISTICS (continued) (VS = 2.5V, VCM = 1.25V, VOUT = 1.25V, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER CONDITIONS TEMP MIN TYP MAX 150 500 UNITS Input Characteristics +25℃ Input Offset Voltage (VOS) Full 550 μV Input Bias Current (IB) +25℃ 15 pA Input Offset Current (IOS) +25℃ 10 pA Input Voltage Range +25℃ Common Mode Rejection Ratio (1) (CMRR) VCM = 0V to 2.5V Large-Signal Voltage Gain ( AVO) RL = 10kΩ, VOUT = 0.3V to 2.4V Input Offset Voltage Drift (ΔVOS/ΔT) 0 +25℃ 75 Full 61 +25℃ 95 Full 91 Full 2.5 90 V dB 140 dB 200 nV/℃ Output Characteristics RL = 100kΩ to -VS Output Voltage High (VOH) RL = 10kΩ to -VS RL = 100kΩ to +VS Output Voltage Low (VOL) RL = 10kΩ to +VS Output Short-Circuit Limit (ISC) VOUT = 1.25V, RL = 10Ω to GND +25℃ 2.49 Full 2.473 +25℃ 2.48 Full 2.46 2.498 2.497 1 +25℃ V Full V 10 11 3 +25℃ Full 15 16 +25℃ 20 Full 14 +25℃ 90 Full 73 27 mV mV mA Power Supply Power Supply Rejection Ratio (1) (PSRR) VS = 2.5V to 5.5V Quiescent Current (IQ) VOUT = VS/2 +25℃ 120 440 Full dB 700 786 μA Dynamic Performance Gain-Bandwidth Product (GBP) AV = +100 +25℃ 1.45 MHz Slew Rate (SR) AV = +1, RL = 10kΩ, 2V output step +25℃ 0.75 V/μs Overload Recovery Time AV = -100, RL = 10kΩ, VIN = 200mV (RET to GND) +25℃ 0.04 ms Input Voltage Noise 0.1Hz to 10Hz +25℃ 0.9 μVP-P Input Voltage Noise Density (en) f = 1kHz +25℃ 77 nV/ Hz Noise Performance NOTE: 1. PSRR and CMRR are affected by the matching between external gain-setting resistor ratios. SG Micro Corp www.sg-micro.com JANUARY 2013 4 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 TYPICAL PERFORMANCE CHARACTERISTICS Large Signal Transient Response at +2.5V V OUT (500mV/div) V OUT (1V/div) Large Signal Transient Response at +5V CL = 300pF RL = 2kΩ A V = +1 CL = 300pF RL = 2kΩ A V = +1 Time (5µs/div) Time (2µs/div) Small Signal Transient Response at +5V Small Signal Transient Response at +2.5V CL = 50pF RL = ∞ A V = +1 V OUT (50mV/div) V OUT (50mV/div) CL = 50pF RL = ∞ A V = +1 Time (5µs/div) Time (5µs/div) A V = -100 Closed Loop Gain (dB) Closed Loop Gain (dB) Closed Loop Gain vs. Frequency at +5V 60 50 40 30 20 10 0 -10 -20 -30 -40 A V = -10 A V = +1 10 100 1000 Frequency (kHz) SG Micro Corp www.sg-micro.com 10000 Closed Loop Gain vs. Frequency at +2.5V 60 50 40 30 20 10 0 -10 -20 -30 -40 A V = -100 A V = -10 A V = +1 10 100 1000 10000 Frequency (kHz) JANUARY 2013 5 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 TYPICAL PERFORMANCE CHARACTERISTICS (continued) 0.1Hz to 10Hz Noise at +5V Noise (2mV/div) Noise (2mV/div) 0.1Hz to 10Hz Noise at +2.5V A V = +10,000 A V = +10,000 Time (10s/div) Time (10s/div) Negative Overvoltage Recovery Positive Overvoltage Recovery V IN 0V 0V 0V 200mV /div V SY = ±2.5V V IN = +200mV P-P (RET to GND) CL = 0pF RL = 10kΩ A V = -100 V OUT 1V /div 200mV /div 1V /div 0V Time (20µs/div) Open Loop Gain,Phase Shift vs. Frequency at +5V Open Loop Gain, Phase Shift vs. Frequency at +2.5V Phase Shift 96 72 48 Open Loop Gain 24 10 100 1000 10000 Frequency (kHz) SG Micro Corp www.sg-micro.com 0 100000 Open Loop Gain (dB) 120 CL = 0pF RL = ∞ Phase Shift (Degrees) 60 50 40 30 20 10 0 -10 -20 -30 -40 Time (20µs/div) 60 50 40 30 20 10 0 -10 -20 -30 -40 CL = 0pF RL = ∞ Phase Shift 120 96 72 48 Open Loop Gain 24 10 100 1000 10000 Phase Shift (Degrees) V OUT Open Loop Gain (dB) V SY = ±2.5V V IN = -200mV P-P (RET to GND) CL = 0pF RL = 10kΩ A V = -100 V IN 0 100000 Frequency (kHz) JANUARY 2013 6 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Voltage Noise Density at +5V from 0.1Hz to 2.5kHz 104 RS = 0Ω 91 78 en (nV/ √Hz) en (nV/ √Hz) 104 RS = 0Ω 91 Voltage Noise Density at +2.5V from 0.1Hz to 2.5kHz 65 52 39 78 65 52 39 26 26 13 13 0 0 0 0.5 1 1.5 2 0 2.5 0.5 Voltage Noise Density at +5V from 0.1Hz to 25kHz 2.5 112 96 en (nV/ √Hz) 96 en (nV/ √Hz) 2 Voltage Noise Density at +2.5V from 0.1Hz to 25kHz 128 112 80 64 48 80 64 48 32 32 16 16 RS = 0Ω RS = 0Ω 0 0 0 10 5 15 20 0 25 5 PSRR vs. Frequency at ±2.5V 100 80 80 PSRR (dB) 60 -PSRR 0 0 10 100 Frequency (kHz) SG Micro Corp www.sg-micro.com 25 1000 10000 -PSRR 40 20 1 20 60 20 0.1 15 PSRR vs. Frequency at ±1.25V 100 +PSRR 40 10 Frequency (kHz) Frequency (kHz) PSRR (dB) 1.5 Frequency (kHz) Frequency (kHz) 128 1 +PSRR 0.1 1 10 100 1000 10000 Frequency (kHz) JANUARY 2013 7 Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier SGM8591 TYPICAL PERFORMANCE CHARACTERISTICS (continued) CMRR vs. Frequency at +5V 100 80 CMRR (dB) 80 CMRR (dB) CMRR vs. Frequency at +2.5V 100 60 40 60 40 20 20 0 0 0.1 1 10 100 1000 Frequency (kHz) 10000 0.1 1 10 100 Frequency (kHz) 1000 10000 REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (JANUARY 2013) to REV.A Page Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com JANUARY 2013 8 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOIC-8 0.6 D e 2.2 E1 E 5.2 b 1.27 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 c θ A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 1.350 1.750 0.053 0.069 A1 0.100 0.250 0.004 0.010 A2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 D 4.700 5.100 0.185 0.200 E 3.800 4.000 0.150 0.157 E1 5.800 6.200 0.228 0.244 e SG Micro Corp www.sg-micro.com 1.27 BSC 0.050 BSC L 0.400 1.270 0.016 0.050 θ 0° 8° 0° 8° TX00010.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SOIC-8 13″ 12.4 6.40 5.40 2.10 4.0 8.0 2.0 12.0 Q1 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 13″ 386 280 370 5 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000