SGM8744YC5G/TR

SGM8744 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator GENERAL DESCRIPTION FEATURES The SGM8744 is a single, high speed, low power ● High Speed: 6ns Propagation Delay (100mV comparator, which features a fast 6ns propagation Overdrive) delay. The device is optimized for low voltage operation ● Low Supply Current: 1.3mA (TYP) at VS = 3V on 3V or 5V supply, and consumes only 1.3mA supply ● Low Offset Voltage: 0.8mV (TYP) current. ● Rail-to-Rail Input and Output The SGM8744 supports rail-to-rail input and output operation. The input common mode voltage range is from -0.1V to (+VS) + 0.1V, and the output voltage swing is within 0.2V of the rails without external pull-up or pull-down resistor. The device can be compatible with CMOS and TTL logics. Any input or output pin has a continuous short-circuit protection to both power supply rails. The SGM8744 has an internal hysteresis for reducing comparator sensitivity to noise, even when the input signals move slowly. The SGM8744 is available in Green SOT-23-5 and SC70-5 packages. It is rated over the -40℃ to +85℃ temperature range. ● Supply Voltage Range: 2.7V to 5.5V ● Optimized for 3V and 5V Applications ● Output Swing to within 195mV from Rails with 4mA Output Current ● Supports CMOS or TTL Logic ● Internal Hysteresis for Reducing Comparator Sensitivity to Noise ● -40℃ to +85℃ Operating Temperature Range ● Available in Green SOT-23-5 and SC70-5 Packages APPLICATIONS 3V or 5V Applications Portable/Battery-Powered Equipment Mobile Phones Zero-Crossing Detectors Threshold Detectors Line Receiver Units SG Micro Corp www.sg-micro.com NOVEMBER 2014 – REV. A 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 PACKAGE/ORDERING INFORMATION MODEL SGM8744 PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SOT-23-5 -40℃ to +85℃ SGM8744YN5G/TR SM9XX Tape and Reel, 3000 SC70-5 -40℃ to +85℃ SGM8744YC5G/TR SM8XX Tape and Reel, 3000 MARKING INFORMATION NOTE: XX = Date Code. YYY X X Date Code - Month Date Code - Year Serial Number Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS Supply Voltage, +VS to -VS ................................................ 6V VIN Differential ............................................................... ±2.5V Voltage at Input/Output Pins ....... (-VS) - 0.3V to (+VS) + 0.3V Junction Temperature .................................................+150℃ Storage Temperature Range ....................... -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 6000V MM ................................................................................. 400V RECOMMENDED OPERATING CONDITIONS Operating Temperature Range ....................... -40℃ to +85℃ Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. PIN CONFIGURATIONS (TOP VIEW) OVERSTRESS CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. SG Micro Corp www.sg-micro.com 1 -VS 2 -IN 3 5 +VS 4 OUT _ ESD SENSITIVITY CAUTION +IN + Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. SOT-23-5/SC70-5 NOVEMBER 2014 2 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 ELECTRICAL CHARACTERISTICS (VS = 5.0V, VCM = 0V, CL = 15pF, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER Operating Supply Voltage SYMBOL (1) CONDITIONS MIN TYP MAX UNITS VS 2.7 5.5 V Input Common Mode Voltage Range (2) VCM -0.1 VS + 0.1 V Input Offset Voltage (3) VOS Input Hysteresis (4) VHYST ISOURCE Output Short-Circuit Current ISINK Common Mode Rejection Ratio (5) CMRR Power Supply Rejection Ratio PSRR VOH Output Voltage Swing from Rail VOL VS = 5V, VCM = 0V VS = 5V, VCM = 0V IS 3 VS = 5V, Out to VS/2 23.5 -40℃ ≤ TA ≤ +85℃ 19.5 VS = 5V, Out to VS/2 -31 60 -40℃ ≤ TA ≤ +85℃ 57 VCM = 0V, VS = 2.7V to 5.5V 56 -40℃ ≤ TA ≤ +85℃ 51 Propagation Delay (Low to High) Rise Time tRISE Fall Time tFALL mA dB 74 195 dB 275 308 188 245 mV 277 -40℃ ≤ TA ≤ +85℃ 1.3 1.7 2.0 -40℃ ≤ TA ≤ +85℃ 1.4 1.9 mA 2.1 -40℃ ≤ TA ≤ +85℃ Propagation Delay (High to Low) -25 77 -40℃ ≤ TA ≤ +85℃ VS = 5V, IOUT = 0 mV -20 VS = 5V, VCM = 0V to 5V VS = 5V, IOUT = -4mA mV 35 -40℃ ≤ TA ≤ +85℃ VS = 5V, IOUT = 4mA 4.9 5.6 -40℃ ≤ TA ≤ +85℃ VS = 3V, IOUT = 0 Supply Current 0.8 VS = 3V, Overdrive = 10mV 11 VS = 3V, Overdrive = 100mV 6 VS = 3V, Overdrive = 10mV 11 VS = 3V, Overdrive = 100mV 6 VS = 3V, Overdrive = 10mV 8 VS = 3V, Overdrive = 100mV 8 VS = 3V, Overdrive = 10mV 6 VS = 3V, Overdrive = 100mV 6 ns ns ns ns NOTES: 1. This value is from PSRR test. 2. This value is from PD test. For the range of common mode voltage, the maximum input common mode voltage can reach (+VS) + 0.1V without any damage to SGM8744. 3. VOS is the midway voltage for the hysteresis zone of the comparator. 4. The input hysteresis is the gap between the upper threshold where the output of the comparator switches to high position and the lower threshold where the output of the comparator switches to low position. 5. CMRR is defined over the condition of whole input common mode range. SG Micro Corp www.sg-micro.com NOVEMBER 2014 3 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 TYPICAL PERFORMANCE CHARACTERISTICS Supply Current vs. Temperature Sinusoid Response at 0.2MHz V S = 3V V CM = 0V 2 100mV/div V IN V S = 5V 1.5 1 V S = 3V 0.5 1V/div Supply Current (mA) 2.5 V OUT 0 -50 -25 0 25 50 75 100 Time (1μs/div) Temperature (℃) Output Low Voltage vs. Temperature Output High Voltage vs. Temperature 420 V S = 3V 250 Output High Voltage (mV) Output Low Voltage (mV) 300 200 150 V S = 5V 100 50 ISINK = 4mA 0 -50 -25 0 25 50 75 350 V S = 3V 280 210 140 V S = 5V 70 ISOURCE = 4mA 0 -50 -25 0 100 V S = 3V -10 -20 -30 -40 V S = 5V -50 -60 -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 75 100 Output Short-Circuit (Source) Current (mA) Output Short-Circuit (Sink) Current (mA) Output Short-Circuit (Sink) Current vs. Temperature 0 25 50 75 100 Temperature (℃) Temperature (℃) Output Short-Circuit (Source) Current vs. Temperature 60 50 V S = 5V 40 30 20 10 0 -50 V S = 3V -25 0 25 50 75 100 Temperature (℃) NOVEMBER 2014 4 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Propagation Delay vs. Input Overdrive V S = 3V, V CM = 0V RL = 10kΩ, CL = 18pF 12 10 H-L 8 Propagation Delay vs. Capacitive Load 24 Propagation Delay (ns) Propagation Delay (ns) 14 L-H 6 4 V S = 3V, V CM = 0V RL = 10kΩ, V OD = 100mV 20 16 H-L 12 L-H 8 4 0 40 80 120 160 Input Overdrive (mV) 200 0 180 100mV/div 100mV/div 0V V IN 1V/div 1V/div V OUT 0V Time (50ns/div) Time (50ns/div) Propagation Delay (H-L) Propagation Delay (H-L) V OD = 10mV, V CM = 0V V OD = 100mV, V CM = 0V V OUT V IN 0V 100mV/div 100mV/div V IN 0V 150 V OD = 100mV, V CM = 0V V OD = 10mV, V CM = 0V V OUT 0V 60 90 120 Capacitive Load (pF) Propagation Delay (L-H) Propagation Delay (L-H) 0V V IN 30 V OUT Time (50ns/div) SG Micro Corp www.sg-micro.com 1V/div 1V/div 0V 0V Time (50ns/div) NOVEMBER 2014 5 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 Offset Voltage Production Distribution 6.00 5.00 4.00 3.00 2.00 1.00 0.00 -1.00 -2.00 15200 Samples 1 Production Lot -3.00 50 45 40 35 30 25 20 15 10 5 0 -4.00 Percentage of Comparators (%) TYPICAL PERFORMANCE CHARACTERISTICS (continued) Offset Voltage (mV) SG Micro Corp www.sg-micro.com NOVEMBER 2014 6 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 DETAILED DESCRIPTION The SGM8744 is a single, high speed, low power comparator with internal hysteresis. The device is optimized for low voltage operation from 2.7V to 5.5V single supply. It supports rail-to-rail input and output operation. With 4mA output current, the output voltage swing is within 195mV of the rails without external pull-up or pull-down circuitry. The SGM8744 is suitable for portable equipment. It can be compatible with CMOS and TTL logics. There are a lot of comparators switched frequently for the linear region as the effect of noise and parasitic parameters, and the condition of this negative situation is when the one input of the comparator tends to reach the other input voltage. In order to ease the effect of noise and parasitic parameter, there is a 3mV internal hysteresis inside the comparator. There are two trip points which are made by the comparator: the trip points when rising edge occurs and the trip points when falling edge occurs. And the gap between two trip points is the hysteresis of the comparator. The offset voltage VOS is defined as the average value of the two trip points. For the condition which two inputs of the comparator are nearly equal, the internal hysteresis will launch to avoid the frequently switching at this case. For the normal comparator other than SGM8744 the users usually use external resistors connected at +IN pin to provide hysteresis, while the internal hysteresis of SGM8744 can provide internal hysteresis without any external component. However, if users need more hysteresis to reject the influence of noise or parasitic parameters, please add the external resistors at +IN pin to increase the hysteresis. VTRIP+ VIN+ VHYST VTRIP+ + VTRIPVOS = 2 VIN- = 0 On the condition shown in Figure 1, the -IN is fixed while +IN is varied, and the corresponding output is shown under the figure of input signal. However, if +IN is fixed while -IN is varied, the output will be inverted. Output Structure In Figure 2, the SGM8744 has a push-pull output stage. When output is changed from logic high/low to low/high, the changed sink/source current pulls/pushes output pin to logic low/high. Beginning this transition, larger sink/source current is used to create a high slew rate transit from high/low to low/high. Once the output voltage reaches VOL/VOH, it will reduce the sink/source current to a just right value to maintain the VOL/VOH static condition. This current-driven push-pull output stage will significantly reduce the power consumption in application system. If low slew rate transition is needed in system design, adjusting the load capacitance will change the slew rate. The heavier capacitive load will slow down the output voltage transition. This feature will be used to reduce the interference generated by fast edge of transition between 1 and 0 in noise-sensitive system. +VS ISOURCE Output -VS ISINK Figure 2. Push-Pull Output Structure VTRIP- VOH Comparator Output VOL Figure 1. The Waveform for Input and Output, Non-Inverting Input Varied SG Micro Corp www.sg-micro.com NOVEMBER 2014 7 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator SGM8744 APPLICATION INFORMATION Application Circuits Layout and Bypassing Good power supply decoupling, layout and grounding are very important for SGM8744 to realize the full high-speed capabilities in system, following skills will be used: VDD = 3.3V VDD VREF Serial Digital Input SDI 8-Bit DAC DACOUT GND + VSS Analog Input SGM8744 _ Figure 3. A Threshold Detector Controlled by 8-Bit DAC Coax Line VS = 3V VS = 3V 10kΩ + Clean Digital Signal SGM8744 20kΩ _  A 0.1µF to 4.7µF range ceramic capacitor is used to provide good power supply decoupling. This ceramic capacitor must be placed as close to +VS pin as possible.  For grounding, unbroken and low-inductance ground plane is a good choice.  For Layout, use short PCB trace to avoid unwanted parasitic feedback around the comparator. SGM8744 must be soldered directly to the PCB and the socket is not recommended. 3V 20kΩ 0 Figure 4. The Application of Line Receiver SG Micro Corp www.sg-micro.com NOVEMBER 2014 8 SGM8744 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (NOVEMBER 2014) to REV.A Page Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com NOVEMBER 2014 9 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SC70-5 D e1 0.65 e E1 1.9 E 0.75 b 0.4 1.3 RECOMMENDED LAND PATTERN (Unit: mm) L L1 A θ A1 c 0.20 A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.900 1.100 0.035 0.043 A1 0.000 0.100 0.000 0.004 A2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 D 2.000 2.200 0.079 0.087 E 1.150 1.350 0.045 0.053 E1 2.150 2.450 0.085 0.096 e 0.65 TYP 0.026 TYP e1 1.300 BSC 0.051 BSC L 0.525 REF 0.021 REF L1 0.260 0.460 0.010 0.018 θ 0° 8° 0° 8° SG Micro Corp www.sg-micro.com TX00043.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter A0 P1 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SC70-5 7″ 9.5 2.25 2.55 1.20 4.0 4.0 2.0 8.0 Q3 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000