SGM8965-2XS8G/TR

SGM8965-1/SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers GENERAL DESCRIPTION FEATURES The single SGM8965-1 and dual SGM8965-2 are high  Gain-Bandwidth Product: 50MHz speed CMOS operational amplifiers with high input  Slew Rate: 30V/μs impedance, zero-crossover and low distortion. These  Stable When Gain ≥ 4 devices can operate from 2.2V to 5.5V single supply.  High CMRR: 100dB (TYP) The SGM8965-1/2 feature high speed and low noise. These devices support rail-to-rail input and output operation. They have a wide input common mode voltage range and output swing within 8mV. Furthermore, the SGM8965-1/2 provide high CMRR with zero-crossover and low distortion, which are designed to drive ADCs with high linearity. They can be used in a variety of applications. The SGM8965-1 is available in Green SOT-23-5 and SOIC-8 packages. The SGM8965-2 is available in Green SOIC-8 and MSOP-8 packages. They are specified over the extended -40 ℃ temperature range. to +125 ℃  Excellent THD+N: 0.00015%  Low Offset Voltage: 250μV (MAX)  Low Bias Current: 0.5pA (TYP)  Low Input Voltage Noise: 4.5nV/√Hz at 100kHz  Rail-to-Rail Input and Output  Supply Voltage Range: 2.2V to 5.5V  -40℃ to +125℃ Operating Temperature Range  Small Packaging: SGM8965-1 Available in Green SOT-23-5 and SOIC-8 Packages SGM8965-2 Available in Green SOIC-8 and MSOP-8 Packages APPLICATIONS Audio Active Filter Signal Conditioning Sensor Amplification Data Acquisition Process Control Test Equipment Wideband Amplifier SG Micro Corp www.sg-micro.com DECEMBER 2016 – REV. A SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers PACKAGE/ORDERING INFORMATION MODEL PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION SOT-23-5 -40℃ to +125℃ SGM8965-1XN5G/TR SZ9XX Tape and Reel, 3000 SOIC-8 -40℃ to +125℃ SGM8965-1XS8G/TR SGM 89651XS8 XXXXX Tape and Reel, 2500 SOIC-8 -40℃ to +125℃ SGM8965-2XS8G/TR SGM 89652XS8 XXXXX Tape and Reel, 2500 MSOP-8 -40℃ to +125℃ SGM8965-2XMS8G/TR SGM89652 XMS8 XXXXX Tape and Reel, 4000 SGM8965-1 SGM8965-2 MARKING INFORMATION NOTE: XX = Date Code. XXXXX = Date Code and Vendor Code. SOT-23-5 SOIC-8/MSOP-8 XXXXX YYY X X Date Code - Month Date Code - Year Serial Number Vendor Code Date Code - Week Date Code - Year Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS Supply Voltage................................................................... 6V Signal Input Terminals, Voltage .................................................... (-VS) - 0.3V to (+VS) + 0.3V Signal Input Terminals, Current .................................. ±10mA Output Short-Circuit ............................................. Continuous Junction Temperature .................................................+150℃ Storage Temperature Range ....................... -65℃ to +150℃ Lead Temperature (Soldering, 10s) ............................+260℃ ESD Susceptibility HBM ............................................................................. 8000V MM ................................................................................. 400V CDM ............................................................................ 1000V RECOMMENDED OPERATING CONDITIONS Supply Voltage Range ........................................2.2V to 5.5V Operating Temperature Range ..................... -40℃ to +125℃ OVERSTRESS CAUTION Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Recommended Operating Conditions section is not implied. ESD SENSITIVITY CAUTION This integrated circuit can be damaged if ESD protections are not considered carefully. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because even small parametric changes could cause the device not to meet the published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, or specifications without prior notice. SG Micro Corp www.sg-micro.com DECEMBER 2016 2 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers PIN CONFIGURATIONS SGM8965-1 (TOP VIEW) VOUT 1 -VS 2 +IN 3 5 +VS 4 -IN SOT-23-5 SGM8965-1 (TOP VIEW) SGM8965-2 (TOP VIEW) NC 1 8 NC VOUTA 1 8 +VS -IN 2 7 +VS -INA 2 7 VOUTB +IN 3 6 VOUT +INA 3 6 -INB -VS 4 5 NC -VS 4 5 +INB NC = NO CONNECT SOIC-8 SG Micro Corp www.sg-micro.com SOIC-8/MSOP-8 DECEMBER 2016 3 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers ELECTRICAL CHARACTERISTICS (TA = +25℃, VS = 2.2V to 5.5V, VCM = VS/2, VOUT = VS/2 and RL = 10kΩ connected to VS/2, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT 80 250 μV Input Characteristics Input Offset Voltage VOS Input Offset Voltage Drift ΔVOS/ΔT Power Supply Rejection Ratio PSRR Input Bias Current 1.2 -40℃ ≤ TA ≤ +125℃ 6 VS = 2.2V to 5.5V, -40℃ ≤ TA ≤ +125℃ IB Input Common Mode Voltage Range Common Mode Rejection Ratio Open-Loop Voltage Gain AOL 90 0.5 VCM CMRR μV/℃ (-VS) - 0.1 (-VS) - 0.1V ≤ VCM ≤ (+VS) + 0.1V, VS = 5.5V, -40℃ ≤ TA ≤ +125℃ RL = 10kΩ, (-VS) + 0.1V < VO < (+VS) - 0.1V, -40℃ ≤ TA ≤ +125℃ pA (+VS) + 0.1 82 100 94 115 RL = 600Ω, (-VS) + 0.2V < VO < (+VS) - 0.2V 94 105 -40℃ ≤ TA ≤ +125℃ 90 μV/V V dB dB Output Characteristics Output Voltage Swing from Rail Short-Circuit Current ISC Open-Loop Output Impedance RL = 10kΩ, VS = 5.5V, -40℃ ≤ TA ≤ +125℃ 8 VS = 5V 70 mA f = 1MHz, IO = 0 26 Ω 22 mV Power Supply Operating Voltage Range VS Quiescent Current/Amplifier IQ 2.2 IO = 0 5.5 5.3 6.6 6.9 -40℃ ≤ TA ≤ +125℃ V mA Dynamic Performance Gain-Bandwidth Product GBP Slew Rate SR Settling Time to 0.1% tS Settling Time to 0.01% Overload Recovery Time Total Harmonic Distortion + Noise (1) THD+N VS = 5V 50 MHz VS = 5V, G = +1 30 V/μs VS = 5V, 4V Step, G = +4 220 ns VS = 5V, 4V Step, G = +4 300 ns VS = 5V, VIN × Gain > VS < 0.1 μs 0.00015 % 5 μVPP VS = 5V, RL = 600Ω, VO = 4VPP, G = +1, f = 1kHz Noise Performance Input Voltage Noise f = 0.1Hz to 10Hz Input Voltage Noise Density en f = 100kHz 4.5 nV/ Hz Input Current Noise Density in f = 10kHz 125 fA/ Hz NOTE: 1. 3rd-order filter; -3dB bandwidth: 80kHz. SG Micro Corp www.sg-micro.com DECEMBER 2016 4 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers TYPICAL PERFORMANCE CHARACTERISTICS At TA = +25℃, VS = 5V and CL = 0pF, unless otherwise noted. Short-Circuit Current vs. Temperature 100 5.24 60 Short-Circuit Current (mA) Quiescent Current (mA) Quiescent Current vs. Temperature 5.3 5.18 5.12 5.06 5 -50 -25 0 25 50 75 100 -20 -60 -50 -25 0 Temperature (℃) 2 2 — -40℃ — +25℃ — +125℃ -1 -2 -3 - - VS = ±1.05V 10 20 30 40 50 60 70 80 1 125 — +125℃ -1 -3 90 — VS = ±2.75V - - VS = ±1.05V 0 10 20 30 40 50 60 70 80 90 100 Output Current (mA) Quiescent Current vs. Supply Voltage Overshoot vs. Capacitive Load 5.5 100 5.25 80 5 Overshoot (%) Quiescent Current (mA) 100 — +25℃ 0 Output Current (mA) 4.75 4.5 60 G = +4 40 G = -4 20 4.25 4 75 — -40℃ -2 — VS = ±2.75V 0 50 SGM8965-2 Output Voltage vs. Output Current 3 Output Voltaget (V) Output Voltaget (V) SGM8965-1 Output Voltage vs. Output Current 0 25 Temperature (℃) 3 1 Dual Single -100 125 VS = ±2.75V 20 G = +10 2 2.5 3 3.5 4 4.5 Supply Voltage (V) SG Micro Corp www.sg-micro.com 5 5.5 0 0.1 1 10 G = -10 100 1000 Load Capacitance (pF) DECEMBER 2016 5 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers TYPICAL PERFORMANCE CHARACTERISTICS (continued) At TA = +25℃, VS = 5V and CL = 0pF, unless otherwise noted. Large-Signal Step Response Large-Signal Step Response G = +4, RL = 600Ω, VO = ±2V Output Voltage (1V/div) Output Voltage (1V/div) G = +4, RL = 10kΩ, VO = ±2V Time (250ns/div) Time (250ns/div) Small-Signal Step Response Small-Signal Step Response Output Voltage (50mV/div) G = +4, RL = 10kΩ, VO = ±100mV Output Voltage (50mV/div) G = +4, RL = 600Ω, VO = ±100mV Time (50ns/div) Time (50ns/div) Power Supply Rejection Ratio vs. Frequency 0 Common Mode Rejection Ratio vs. Frequency 100 -20 +PSRR 80 -60 -PSRR -80 CMRR (dB) PSRR (dB) -40 60 40 -100 20 -120 -140 0.01 0.1 1 10 100 1000 10000 100000 Frequency (kHz) SG Micro Corp www.sg-micro.com 0 0.01 0.1 1 10 100 1000 10000 Frequency (kHz) DECEMBER 2016 6 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers TYPICAL PERFORMANCE CHARACTERISTICS (continued) At TA = +25℃, VS = 5V and CL = 0pF, unless otherwise noted. Total Harmonic Distortion + Noise vs. Frequency Open-Loop Gain and Phase vs. Frequency THD+N (%) Open-Loop Gain (dB) VO = 1VRMS G= +10, RL = 600Ω 0.001 VO = 1.448VRMS VO = 1VRMS G= +1, RL = 600Ω 0.0001 0 100 10 100 80 60 -80 40 -120 Open-Loop Gain 20 0 10000 20000 1000 -40 Phase Phase (Degree) 0.01 Frequency (Hz) 10 100 -160 1000 10000 -200 100000 Frequency (kHz) Input Voltage Noise Density vs. Frequency 0.1Hz to 10Hz Input Voltage Noise Noise (2μV/div) Input Voltage Noise Density (nV/√Hz) 1000 100 10 1 10 100 1000 10000 100000 Time (2s/div) Frequency (Hz) Offset Voltage Production Distribution 20 3100 Samples 1 Production Lot VS = 5.5V 15 10 5 0 -200 -150 -100 -50 0 50 Offset Voltage (μV) SG Micro Corp www.sg-micro.com Offset Voltage Drift Distribution 35 100 150 200 Percentage of Amplifiers (%) Percentage of Amplifiers (%) 25 30 -40℃ ≤ TA ≤ +125℃ 25 20 15 10 5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Offset Voltage Drift (μV/℃) DECEMBER 2016 7 SGM8965-1 SGM8965-2 50MHz, Low Distortion, Rail-to-Rail I/O, Single-Supply Operational Amplifiers REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (DECEMBER 2016) to REV.A Page Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com DECEMBER 2016 8 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOIC-8 0.6 D e 2.2 E1 E 5.2 b 1.27 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 c θ A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 1.350 1.750 0.053 0.069 A1 0.100 0.250 0.004 0.010 A2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 D 4.700 5.100 0.185 0.200 E 3.800 4.000 0.150 0.157 E1 5.800 6.200 0.228 0.244 e SG Micro Corp www.sg-micro.com 1.27 BSC 0.050 BSC L 0.400 1.270 0.016 0.050 θ 0° 8° 0° 8° TX00010.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS MSOP-8 b E1 E 4.8 1.02 e 0.41 0.65 RECOMMENDED LAND PATTERN (Unit: mm) D L A A1 c θ A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.820 1.100 0.032 0.043 A1 0.020 0.150 0.001 0.006 A2 0.750 0.950 0.030 0.037 b 0.250 0.380 0.010 0.015 c 0.090 0.230 0.004 0.009 D 2.900 3.100 0.114 0.122 E 2.900 3.100 0.114 0.122 E1 4.750 5.050 0.187 0.199 e SG Micro Corp www.sg-micro.com 0.650 BSC 0.026 BSC L 0.400 0.800 0.016 0.031 θ 0° 6° 0° 6° TX00014.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter K0 A0 P1 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SOIC-8 13″ 12.4 6.40 5.40 2.10 4.0 8.0 2.0 12.0 Q1 MSOP-8 13″ 12.4 5.20 3.30 1.50 4.0 8.0 2.0 12.0 Q1 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 13″ 386 280 370 5 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000