MKT100103J101A

Sharma Film Capacitors FILM Quick Reference Guide Series (Former Series) CAPACITORS Style Dielectric/ Construction Metallized Polyester Molded can Metallized Polyester Molded can Metallized Polyester Molded can Metallized Polyester Epoxy molded Metallized Polyester Epoxy dipped Metallized Polyester Epoxy dipped Lead Spacing millimeters / (inches) 5.0 (0.200”) Capacitance Range Voltage Range 0.001 µF to 1.0 µF 50 VDC to 400 VDC 0.033 µF to 0.33 µF 100 VDC to 630 VDC 0.001 µF to 6.8 µF 100 VDC to 1000 VDC PLASTIC FILMS USED IN CAPACITORS The capacitance value of a capacitor depends on the area of the dielectric separating the two conductors, its thickness and the dielectric constant. Other properties of the film such as the temperature coefficient, the dissipation factor, the voltage handling capabilities, its suitability to be metallized etc. also influence the choice of the dielectric. POLYESTER FILM MKT 050 (MKT1.85) MKT 075 (MKT1.67) MKT 100 (MKT1.60) 7.5 (0.300”) 10.0 (0.400”), 15.0 (0.600”), 22.5 (0.886”), 27.5 (1.083”) MKT 00S (SMX) MKT D01 (MPD-1) Surface Mount 0.01 µF to 0.22 µF 50 VDC to 630 VDC 0.001 µF to 6.8 µF 100 VDC to 630VDC 10.0 (0.400”), 15.0 (0.600”), 22.5 (0.886”), 27.5 (1.083”) MKT D02 (MPD-2) 10.0 (0.400”), 15.0 (0.600”), 17.5 (0.689”), 25.0 (0.984”) 27.5 (1.083”) 0.01 µF to 3.9 µF 100 VDC to 630VDC MKT D03 (MPD-3) Metallized Polyester Epoxy dipped 10.0 (0.400”), 15.0 (0.600”), 17.5 (0.689”), 25.0 (0.984”) 27.5 (1.083”) 0.01 µF to 3.9 µF 100 VDC to 630VDC MKTR (MPR) MKTO (MPO) Metallized Polyester Tape wrapped Metallized Polyester Tape wrapped Rounded Axial 0.01 µF to 6.8 µF 63 VDC to 630 VDC 0.01 µF to 6.8 µF 63 VDC to 630 VDC Oval Axial This film has a relatively high dielectric constant which makes it suitable for designs of a capacitor with high volumetric efficiency. It also has high temperature stability, high voltage and pulse handling capabilities and can be produced in very low thickness. It can also be metallized. Polyester is a popular dielectric for plain film capacitors as well as metallized film capacitors. POLYPROPYLENE FILM The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is an ideal characteristic for many designs. Polypropylene has the capability to be metallized. POLYSTYRENE FILM The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized. Cross Reference Guide SHARMA (former series) Arcotronics Evox MEPCO* Philips Roederstein Siemens Thompson Wima MKT 050 MKT1.85 R.85 MMK 5 712A 1 370 MKT1817 B32529 IRD/MC MKS 2 MKT 075 MKT1.67 R.66 MMK 719A 1 371 MKT1818 B32520/30 IRD/MC MKS 3 MKT 100 MKT1.60 R.60 MMK 719A 1 372 & 373 MKT1822 B32521/31 IRD/MC MKS 4 MKT 00S SMX LDA MKT1824 SMD 7.3 MKT D01 MPD-1 712A 1 367 to 369 5140 to 44 MD MKT D02 MPD-2 712A 1 366 to 369 5140 to 44 MD MKT D03 MPD-3 712A 1 367 to 369 5140 to 44 MD MKTR MPR MKT1813 MKTO MPO - * MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE. Sharma Film Capacitors Ordering/Part Numbering Example below indicates: MKT100 Series, 0.1µF, 5% Tol., 100 Volts, Bulk. (EXAMPLE) M K T 1 0 0 1 0 4 J 1 0 1 RH Series Enter Series Code: (Up to 6 Digits) MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02, MKTD03, MKTR, MKTO. RoHS Compliant Capacitance Enter EIA Capacitance Code: (3 Digits) First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Example: 1000pF = 102 0.01uF = 103 Tolerance Enter Capacitance Tolerance Code: (1 Digit) Tolerance SPCL ± 1% ± 2% ± 3% Code A F G L Rated Voltage Enter Voltage Code: (3 Digits) First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating. Third Digit Indicates Number of Zeros Example: 50V DC = 500 250V DC = 251 Product Packaging Code Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style. For other packaging styles, Enter packaging code listed below. (1 Digit) Packaging Code T A ( no code) Packaging Style Tape / Reel Ammo Bulk ± 5% J ± 6% H ± 10% ± 20% K M Part Marking BOX TYPE The Capacitance value is marked in µF together with the Tolerance code and the DC Voltage Figures on the top surface of the capacitors. The MKT 100 capacitance is also marked in Nano Farads with "n" representing the decimal point in the capacitance value. The SAHA logo and series codes, MKT100, MKP 100, KP300 etc., or their former series designations, are marked on the side. MKT100 series is supplied in certain cases, without series code marking. SAHA logo may be replaced with marking, "SH" or “S” depending upon the limitations of space. 2.2J250 OTHER TYPES All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also indicated with a dot or ring. DIPPED TYPE The Capacitance value is marked in µF along with the Tolerance code and the DC Voltage 2.2K250 Figures on the side of the capacitors. The capacitance is also marked in Capacitance code with the first two digits representing the significant digits followed by one digit representing the number of zeros. The SAHA logo may be replaced with marking, "SH", “S” or no brand marking depending on the limitation of space. Sharma Film Capacitors PERFORMANCE CHARACTERISTICS ELECTRICAL - BASIC PARAMETERS 1.1 RATED CAPACITANCE The nominal or rated value of capacitance is measured at 25 °C in an measuring bridge with 1K Hz source, free of harmonics. Please refer to relevant series for the range of capacitance value covered. Capacitance is frequency and temperature dependent. The variation pattern of capacitance with temperature and frequency is explained in sections 2.1 and 2.2. 1.2 CAPACITANCE TOLERANCE The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance is expressed in percentage. The standard tolerances for plastic film capacitors are ±5% (J), ±10% (K) and ±20% (M). 1.3 RATED VOLTAGE The voltage at which the capacitor can operate continuously up to a temperature of 85 °C (unless otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the case sizes are listed in a matrix of capacitance value and rated voltage. 1.4 CATEGORY VOLTAGE The maximum voltage that may be applied continuously over the temperature range is termed the category voltage. This is same as the rated voltage up to 85 °C unless otherwise specified in the climactic category of the product. Above 85 °C a derating has to be applied depending upon the dielectric. 1.5 OPERATING TEMPERATURE This is the temperature range with in which the capacitor can function as specified in the climactic category. Please refer to relevant sections for derating above the temperature at which the full rated voltage can be applied. 1.6 DISSIPATION FACTOR This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage. Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet of the relevant series at 25 °C. Dissipation factor is temperature and frequency dependent. The nature of variation of dissipation factor with temperature and frequency for different dielectric are explained in Figures 2.3A to 2.3C and 2.4A to 2.4C. 1.7 INSULATION RESISTANCE Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds as the product of M Ohm and µF. 1.8 PULSE RISE TIME The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage or pulse. This is expressed in terms of Volts per µseconds. The dv/ dt rating of a capacitor depends upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of different types of capacitors are listed in the corresponding data sheets of the capacitors. Polypropylene Capacitance Change Vs. Temperature Figure 2.1A Polystyrene Capacitance Change Vs. Temperature Figure 2.1B Polyester Capacitance Change Vs. Temperature Figure 2.1C Figure 2.2A ELECTRICAL - EFFECTS AND RELATIONS 2.1 TEMPERATURE DEPENDENCE OF CAPACITANCE Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of change of capacitance with temperature is termed the Temperature Coefficient. The nominal values of temperature coefficient for different dielectrics are shown below. DIELECTRICS TEMPERATURE COEFFICIENT POLYSTYRENE -150 ppm POLYESTER +400 ppm POLYPROPYLENE -200 ppm Polystyrene Capacitance Change Vs. Frequency 2.2 FREQUENCY DEPENDENCE OF CAPACITANCE Capacitance reduces with increase in frequency. The variation pattern for different dielectrics are shown in figure 2.2A, 2.2B and 2.2C. 2.3 TEMPERATURE DEPENDENCE OF DISSIPATION FACTOR The dissipation factor varies with temperature. Each dielectric follows a unique variation pattern. The variation pattern for different dielectrics are shown in figure 2.3A, 2.3B and 2.3C. Figure 2.2C Figure 2.2B Polypropylene Capacitance Change Vs. Frequency Polyester Capacitance Change Vs. Frequency Sharma Film Capacitors Figure 2.3A Figure 2.4A 2.4 FREQUENCY DEPENDENCE OF DISSIPATION FACTOR Dissipation factor increased with frequency. The variation pattern is different for different dielectrics. The typical variation pattern for different dielectrics are shown in fig. 2.4A, 2.4B and 2.4C. 2.5 TEMPERATURE DEPENDENCE OF INSULATION RESISTANCE The insulation resistance of the dielectric varies with temperature. The variation pattern is different fro different dielectric films. The typical variation pattern for different dielectrics are shown in figure 2.5A, 2.5B and 2.5C. Polystyrene Dissipation Factor Vs. Temperature Polystyrene Dissipation Factor Vs. Frequency Figure 2.3B Figure 2.4B ELECTRICAL - AC APPLICATIONS When a capacitor is connected to alternating voltage its electrodes are alternately charged positive and negative. The charge alternates with a rhythm of double the frequency of the alternating voltage. Thus there is alternating current flowing in the leads of the capacitor. 3.1 ACROSS THE LINE APPLICATIONS In this application the capacitor is connected between the lines, ie, between the main phase and neutral line terminals. In this type of application, failure of capacitor due to short circuit will not result in an electric shock. The capacitors rated for normal across the line applications are termed class-X2 capacitors. 3.2 BETWEEN LINE AND GROUND APPLICATIONS In this type of application the capacitors are connected between the line and the ground, ie, between the phase terminal and the body. In this application, failure of the capacitor due to short circuit could possibly expose somebody touching the appliance to an electric shock. The capacitors rated for this application are termed classY capacitors. Polypropylene Dissipation Factor Vs. Temperature Polypropylene Dissipation Factor Vs. Frequency Polyester Dissipation Factor Vs. Temperature Polyester Dissipation Factor Vs. Frequency Figure 2.3C Figure 2.4C MECHANICAL CHARACTERISTICS Figure 2.5A Figure 2.5B 4.1 RESISTANCE TO SOLVENTS The encapsulation technics adopted in the manufacture of plastic film capacitors ensure resistance to a wide range of solvents and cleaning liquids. The epoxy end sealed boxed capacitors can stand Trichloro trifluorethane, Methanol, Ethanol, Isopropanol and Aqueous cleaning solvents. 4.2 SOLDERABILITY A minimum of 3/4 of the circumferential surface of the terminations will be covered with new solder when dipped in molten solder bath at 230 °C for 2 ±1 sec. after immersing in methanol - rosin solution at room temperature for 5 to 10 seconds. Polystyrene Insulation Resistance Vs. Temperature Polyester Insulation Resistance Vs. Temperature Figure 2.5C 4.3 TERMINAL STRENGTH The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of 2.25 Kgs(5 lbs). ENVIRONMENTAL RESISTANCE TO HUMIDITY The capacitor samples will be exposed to 93 ±2 °C for 56 days at 40 ±2 °C. After the test the capacitance change shall be within 3% of the original value, The insulation resistance shall be within 50% of the initial limits and the dissipation factor shall remain within the initial specifications. Polypropylene Insulation Resistance Vs. Temperature Sharma Film Capacitors MKT 050 SERIES Formerly MKT 1.85 series INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, Bypassing and Coupling, this series is widely used in all General Purpose applications. FEATURES value and Voltage • Wide miniature size range • Ultra retardant case and potting • Flame dimensions and surface finish due to molded case construction • Consistentin tape & reel form for automatic insertion • Available capability • Self healing GENERAL SPECIFICATIONS: Dissipation factor: For capacitance ≤ 0.1 µF = 0.010 max at 1 KHz, 0.015 max at 10 KHz, 0.030 max at 100 KHz. For capacitance > 0.1 µF = 0.0010 max at 1 KHz, 0.0015 max at 10 KHz. Insulation resistance: For nominal voltage < 100 V DC; ≥10,000 M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ≥ 30,000 M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension “T”≤ 3.5mm (0.138”) "d"= 0.6 mm (0.024") for dimension “T” >3.5mm (0.138”) "LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply PULSE RISE TIME (dv/dt) Volts per µsec. RATED VOLTAGE 50 63 100 100 100 250 400 Capacitance RangeµF 0.001-1.0 0.001-1.0 >0.0068 0.0033-0.0068 >0.0033 0.001-1.0 0.001-1.0 dv/dt value 4 8 10 15 30 20 40 Taping Dimensions for MKT 050 Series (5mm Pitch) DESCRIPTION d Lead wire dia. P Tapingpitch P0 Sprocketholepitch P1 Centering of lead wire P2 Centering of the body p Lead spacing dS Component alignment H Height from Sproket Center to component body W Tape width W 0 Width of adhesive tape W 1 Sprocket hole alignment D0 Positionholediameter t Tape thickness DIMENSION TOLERANCES mm Inches mm Inches 0.5 to 0.6 0.020 to 0.024 ±0.05 ±0.002 12.7 0.500 ±1 ±0.039 12.7 0.500 ±0.2 ±0.008 3.85 0.152 ±0.7 ±0.028 6.35 0.250 ±1.3 ±0.051 5 0.197 +0.6/ -1.1 +0.024/ -0.043 0 0.000 ±2 ±0.079 16.0, 16.5 0.630, 0.650 ±0.5 ±0.020 or 18.5 or 0.728 18 0.709 +1.0/ -0.5 +0.039/ -0.020 6 min. 0.236 min. 9 0.354 ±0.5 ±0.020 4 0.157 ±0.2 ±0.008 0.7 0.028 ±0.2 ±0.008 Packaging Specifications Bulk, Tape/Reel & Ammo Pack BOX SIZE TxHxL 2.5 x 6.5 x 7.2 3.0 x 6.5 x 7.2 3.5 x 7.5 x 7.2 4.5 x 9.5 x 7.2 5.0 x 10.0 x 7.2 6.0 x 11.0 x 7.2 7.2 x 13.0 x 7.2 BULK CARTON 3000 3000 2000 1500 1000 2000 1500 TAPED REEL PACK AMMO PACK 2500 3500 2100 2900 1800 2500 1400 1900 1200 NA 1000 NA 800 NA Sharma Film Capacitors MKT 050 Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V SERIES CASE DIMENSIONS Voltage Cap Value in µF 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 50 V DC / 30 V AC Dimensions in MM L H T S 63 V DC / 40 V AC Dimensions in MM L H T S 100 V DC / 63 V AC Dimensions in MM L 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 9.5 10.0 11.0 T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.5 4.5 5.0 6.0 S 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 250 V DC / 160 V AC DIMENSIONS IN MM L H T S 400 V DC / 200 V AC DIMENSIONS IN MM L 7.2 7.2 7.2 7.2 7.2 H 6.5 6.5 6.5 6.5 6.5 6.5 7.5 9.5 9.5 10.0 11.0 T 2.5 2.5 2.5 2.5 2.5 3.0 3.5 4.5 4.5 5.0 6.0 S 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 6.5 6.5 6.5 6.5 7.5 9.5 9.5 11.0 13.0 13.0 2.5 2.5 2.5 3.0 3.5 4.5 4.5 6.0 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 6.5 6.5 7.5 7.5 9.5 10.0 11.0 2.5 3.0 3.5 3.5 4.5 5.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.2 7.2 7.2 7.2 7.2 7.2 6.5 6.5 6.5 7.5 7.5 9.5 10.0 11.0 2.5 2.5 2.5 3.5 3.5 4.5 5.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.2 7.2 7.2 7.2 7.2 Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V Voltage Cap Value in µF 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 50 V DC / 30 V AC DimensionsinInches L H T S 63 V DC / 40 V AC DimensionsinInches L H T S 100 V DC / 63 V AC DimensionsinInches L H T S 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 250 V DC / 160 V AC DimensionsinInches L H T S 400 V DC / 200 V AC DimensionsinInches L H T S 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.256 0.295 0.374 0.394 0.433 0.098 0.098 0.118 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.295 0.374 0.374 0.433 0.512 0.512 0.118 0.138 0.177 0.177 0.236 0.283 0.283 0.197 0.283 0.374 0.177 0.197 0.197 0.283 0.394 0.197 0.197 0.197 0.283 0.433 0.236 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.118 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.098 0.098 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 Sharma Film Capacitors MKT 100 SERIES Formerly MKT 1.60 series INTRODUCTION: The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics. In addition to some specific applications such as Blocking, By-passing and Coupling, this series is widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability DIMENSIONS AND TOLERANCES: "d" - 0.8 mm (0.032")) "LL'' - 6.0 ± 1.0mm (0.24 ± 0.04") Tolerance on "s" ± 0.4mm (0.016") • • • • PULSE RISE TIME (dv/dt) Volts per µsec. RATED VOLTAGE 100 160 250 400 630 1000 10.0 (0.40) 6 8 11 20 30 60 LEAD SPACING mm (inches) 15.0 (0.60) 3 5 7 10 15 25 22.5 (0.89) 2 3 4 5.5 8 15 27.5 (1.08) 1 2 3 5 7 10 GENERAL SPECIFICATIONS: Dissipation factor: ≤ 0.0150 at 10K Hz for capacitance ≤ 1.0 µF ≤ 0.0100 at 1 K Hz for capacitance> 1.0 µF Insulation resistance: For nominal voltage > 100 V DC, ≥30,000 M Ohms for C≤ 0.33 µF, ≥10,000 seconds for C> 0.33 µF, For nominal voltage ≤ 100 V DC, ≥10,000 M Ohms for C≤ 0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M). Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C. Temperature range: -55 to 100 °C with derating above 85 °C. Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within ±5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters 100V • 160V• 250V• 400V• 630V• 1000V Voltage Cap Value in µF 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 V DC / 63 V AC Dimensions Millimeters in L H T S 160 V DC / 90 V AC Dimensions Millimeters in L H T S 250 V DC / 160 V AC Dimensions Millimeters in L H T S 400 V DC / 200 V AC Dimensions Millimeters in L H T S 630 V DC / 220 V AC Dimensions Millimeters in L H T S 1000 V DC / 250 V AC Dimensions Millimeters in L H T S 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 13.0 12.0 6.0 10.0 18.0 11.0 5.0 15.0 18.0 11.0 5.0 15.0 18.0 13.5 7.5 15.0 26.5 15.0 6.0 22.5 26.5 15.0 6.0 22.5 26.5 16.0 7.0 22.5 26.5 18.5 10.0 22.5 32.0 20.0 11.0 27.5 32.0 22.0 13.0 27.5 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 11.0 11.0 11.0 12.0 13.5 16.0 17.0 18.5 20.0 22.0 4.0 5.0 5.0 5.0 6.0 7.5 7.0 8.5 10.0 11.0 13.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 32.0 32.0 9.0 11.0 11.0 11.0 12.0 13.5 14.5 17.0 18.5 20.0 22.0 4.0 5.0 5.0 5.0 6.0 7.5 8.5 8.5 10.0 11.0 13.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 32.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 15.0 16.0 17.0 17.0 20.0 22.0 4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 7.0 8.5 9.0 11.0 13.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 9.0 11.0 11.0 11.0 12.0 13.5 15.0 16.0 17.0 17.0 20.0 4.0 4.0 5.0 5.0 5.0 6.0 7.5 6.0 7.0 8.5 9.0 11.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 9.0 9.0 11.0 12.0 11.0 12.0 13.5 15.0 16.0 17.0 20.0 22.0 4.0 4.0 4.0 5.0 6.0 5.0 6.0 7.5 6.0 7.0 8.5 11.0 13.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 Sharma Film Capacitors MKT 100 SERIES CASE DIMENSIONS CONTINUED Case Dimensions in Inches 100V • 160V• 250V• 400V• 630V• 1000V Voltage Cap Value in µF 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.001 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 V DC / 63 V AC DimensionsinInches L H T S 160 V DC / 90 V AC DimensionsinInches L H T S 250 V DC / 160 V AC DimensionsinInches L H T S 400 V DC / 200 V AC DimensionsinInches L H T S 630 V DC / 220 V AC DimensionsinInches L H T S 1000 V DC / 250 V AC DimensionsinInches L H T S 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.709 0.531 0.295 0.591 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.728 0.394 0.886 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.512 0.433 0.197 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.433 0.197 0.591 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.472 0.236 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.669 0.354 1.083 0.709 1.043 1.043 1.043 1.260 1.260 0.531 0.630 0.669 0.728 0.787 0.866 0.295 0.276 0.335 0.394 0.433 0.512 0.591 0.886 0.886 0.886 1.083 1.083 0.709 1.043 1.043 1.260 1.260 0.571 0.669 0.728 0.787 0.866 0.335 0.335 0.394 0.433 0.512 0.591 0.886 0.886 1.083 1.083 1.043 1.260 1.260 1.260 0.669 0.669 0.787 0.866 0.335 0.354 0.433 0.512 0.886 1.260 0.787 0.433 1.083 1.083 1.083 1.083 MKT 075 SERIES Formerly MKT 1.67 series INTRODUCTION: The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use in thickly populated Printed Circuit Boards where miniaturization is important. These capacitors are widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability DIMENSIONS AND TOLERANCES: "d" - 0.6 mm (0.024") for dimension “T” = 4mm (0.160”) "d" - 0.8 mm (0.032") for dimension "T" > 4mm (0.160") "LL'' - 6.0 ± 1.0mm (0.24 ± 0.04") Tolerance on "s" ± 0.4mm (0.016") • • • • GENERAL SPECIFICATIONS: Dissipation factor: ≤ 0.015 at 10 K Hz for capacitance< 1.0 µF Insulation resistance: For nominal voltage ≤ 100 V DC, ≥10,000 M Ohm for C≤ 0.1µF, ≥1,000 seconds for C> 0.1µF, For nominal voltage > 100 V DC, ≥30,000 M Ohm for C≤ 0.33µF, ≥10,000 seconds for C> 0.33µF. Capacitance tolerance: ±5%(J), ±10%(K)and ±10%(M) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at temperature of 25 ± 5 °C Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within ±5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. PULSE RISE TIME (dv/dt) Volts per µsec. RATED VOLTAGE 100 250 400 630 dv/dt per µ 6 15 30 40 VoltsSeconds Sharma Film Capacitors MKT 075 Capacitance in µF SERIES CASE DIMENSIONS Case Dimensions in Inches 100V • 250V Capacitance in µF L Case Dimensions in Millimeters100V • 250V VOLTAGE 100 V DC / 63 V AC Dimensions in Millimeters L H T S L DC/AC 250 V DC / 160 V AC Dimensions in Millimeters H T S VOLTAGE 100 V DC / 63 V AC Dimensions in Inches H T S DC/AC 250 V DC / 160 V AC Dimensions in Inches L H T S 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 11.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.433 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.197 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Millimeters H T S DC/AC 630 V DC / 250 V AC Dimensions in Millimeters L H T S Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Inches H T S DC/AC 630 V DC / 250 V AC Dimensions in Inches L H T S 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 11.0 12.0 4.0 4.0 4.0 4.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.433 0.472 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.354 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 SERIES Formerly MPD 1 series INTRODUCTION: The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. They are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: value • Widehealingand Voltage range capability • Self retardant powder epoxy encapsulation • Flame overall dimensions due to dip coated construction • Minimum GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µ F . Insulation resistance: For 100 VDC rated parts; ≥ 9,000 M Ohms for C≤ 0.33 µF ≥ 3,000 seconds for C> 0.33 µ F, at a temperature , of 25 ± 5 °C, For 250 to 630 VDC rated parts ≥ 15,000 M Ohms for C≤ 0.33 µF, ; ≥ 5,000 seconds for C> 0.33 µ F, at a temperature of 25 ± 5 °C. Capacitance tolerance: ±5%(J),±10%(K) and ±20%(M) (Special parts with close tolerance of ±1% and ±2% available on request) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C Temperature range: -55 to 85 .°C Climatic category: F M F LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. Capacitance change shall remain within ±5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") PULSE RISE TIME (dv/dt) Volts per µsec. LEAD Rated Voltage 100 250 400 630 10.0 (0.40) 6 11 20 30 SPACING 15.0 (0.60) 3 7 10 15 mm (inches) 27.0 (1.06) 1 3 5 7 22.5 (0.89) 2 4 5.5 8 MKTD01 Sharma Film Capacitors MKTD01 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 100V • 250V • 400V • 630V Capacitance in µF L Case Dimensions in Inches 100V • 250V • 400V • 630V Capacitance in µF L V OLTAGE 100 V DC / 63 V AC Dimensions in Millimeters H T S DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L H T S VOLTAGE 100 V DC / 63 V AC Dimensions in Inches H T S DC/AC 250 V DC / 160 V AC Dimensions in Inches L H T S 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 12.5 12.5 12.5 18.0 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 9.5 10.0 10.0 10.5 11.5 12.0 14.0 14.0 16.0 19.0 23.0 25.0 5.0 5.0 5.5 5.5 6.0 6.5 7.5 7.5 9.0 11.0 12.0 14.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 8.5 9.0 9.0 9.0 9.5 9.5 10.0 10.5 11.5 12.5 12.5 14.5 16.0 17.0 19.0 23.0 27.0 4.5 4.5 4.5 4.5 5.0 5.0 5.5 5.5 6.5 7.0 7.0 8.0 9.0 9.5 11.5 14.0 16.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.492 0.492 0.492 0.709 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 0.374 0.394 0.394 0.413 0.453 0.472 0.551 0.551 0.630 0.748 0.906 0.984 0.197 0.197 0.217 0.217 0.236 0.256 0.295 0.295 0.354 0.433 0.472 0.551 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 0.492 0.492 0.492 0.492 0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.335 0.354 0.354 0.354 0.374 0.374 0.394 0.413 0.453 0.492 0.492 0.571 0.630 0.669 0.748 0.906 1.063 0.177 0.177 0.177 0.177 0.197 0.197 0.217 0.217 0.256 0.276 0.276 0.315 0.354 0.374 0.453 0.551 0.650 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063 Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Millimeters H T S DC/AC 630 V DC / 220 V AC Dimensions in Millimeters L H T S Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Inches H T S DC/AC 630 V DC / 220 V AC Dimensions in Inches L H T S 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 12.5 12.5 12.5 12.5 12.5 18.0 18.0 26.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 9.0 9.5 9.5 10.5 10.5 10.5 11.5 12.5 13.5 15.5 18.0 17.5 20.0 23.5 26.0 4.5 4.5 5.0 5.5 6.0 6.0 6.5 6.0 7.0 8.5 9.5 10.0 12.0 13.5 16.5 10.0 10.0 10.0 10.0 10.0 15.0 15.0 22.5 22.5 22.5 22.5 27.0 27.0 27.0 27.0 12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 9.0 9.5 10.5 11.0 11.5 12.5 13.0 14.0 16.5 17.5 19.5 22.5 27.5 4.5 5.0 6.0 6.0 6.5 7.0 7.0 8.5 10.0 10.5 12.0 15.0 19.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 0.492 0.492 0.492 0.492 0.492 0.709 0.709 1.024 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.354 0.374 0.374 0.413 0.413 0.413 0.453 0.492 0.531 0.610 0.709 0.689 0.787 0.925 1.024 0.177 0.177 0.197 0.217 0.236 0.236 0.256 0.236 0.276 0.335 0.374 0.394 0.472 0.531 0.650 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.886 0.886 0.886 0.886 1.063 1.063 1.063 1.063 0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.354 0.374 0.413 0.433 0.453 0.492 0.512 0.551 0.650 0.689 0.768 0.886 1.083 0.177 0.197 0.236 0.236 0.256 0.276 0.276 0.335 0.394 0.413 0.472 0.591 0.748 0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063 SERIES Formerly MPD 2 series INTRODUCTION: The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series has lead spacing starting from 7.5mm. and covers more values than the conventional series. They are suitable for applications such as Blocking, Bypassing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") MKT D02 • • • • GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitanc ≤ 1.0 µF, < 0.0150 at 1 K Hz e PULSE RISE TIME (dv/dt) Volts per µsec. for capacitance> 1.0 µF.Insulation resistance: For 100 VDC rated parts; LEAD SPACING mm (inches) ≥ 9,000 M Ohms for C 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF at a temperature of ≤ Rated 7.5 10.0 15.0 22.5 25 ± 5 °C. For 250 to 630 VDC rated parts ≥ 15,000 M Ohms for C 0.33 µF, ; ≤ Voltage (0.30) (0.40) (0.60) (0.89) ≥ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. 100 6 6 3 2 Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test : 1.6 times the 250 15 11 7 4 rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C. 400 30 20 10 5.5 Temperature range: -55 to 85 ° C Climatic category: F M F 630 40 30 15 8 27.5 (1.08) 1 3 5 7 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within ±5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Sharma Film Capacitors MKT D02 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 100V • 250V • 400V • 630V Capacitance in µF L Case Dimensions in Inches 100V • 250V • 400V • 630V CAPACITANCE in µF L V OLTAGE 100 V DC / 63 V AC Dimensions in Millimeters H T S DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L H T S VOLTAGE 100 V DC / 63 V AC Dimensions in Inches H T S DC/AC 250 V DC / 160 V AC Dimensions in Inches L H T S 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 8.5 9.0 9.0 9.5 9.5 10.0 10.5 11.0 10.5 11.0 11.5 12.0 13.0 14.0 14.0 15.0 16.0 17.5 18.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.5 4.5 5.0 5.5 6.0 6.5 7.0 5.5 6.0 6.5 7.0 7.5 8.5 8.5 9.0 10.0 10.5 11.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 7.5 8.0 8.0 8.0 8.0 8.5 9.0 9.0 9.5 10.0 9.5 10.5 11.0 11.5 12.0 12.5 11.5 12.0 12.5 13.5 14.5 14.0 15.0 15.5 18.5 19.5 20.5 21.5 22.5 5.0 4.5 4.5 4.5 4.5 5.0 5.5 5.5 5.5 6.0 5.5 5.5 6.0 6.5 7.0 7.5 6.5 7.0 8.0 8.0 8.0 7.5 8.0 9.0 9.0 9.5 10.5 12.0 13.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.335 0.354 0.354 0.374 0.374 0.394 0.413 0.433 0.413 0.433 0.453 0.472 0.512 0.551 0.551 0.591 0.630 0.689 0.728 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.197 0.217 0.177 0.197 0.217 0.236 0.256 0.276 0.217 0.236 0.256 0.276 0.295 0.335 0.335 0.354 0.394 0.413 0.433 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142 1.142 0.295 0.315 0.315 0.315 0.315 0.335 0.354 0.354 0.374 0.394 0.374 0.413 0.433 0.453 0.472 0.492 0.453 0.472 0.492 0.531 0.571 0.551 0.591 0.610 0.728 0.768 0.807 0.846 0.886 0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.217 0.217 0.236 0.217 0.217 0.236 0.256 0.276 0.295 0.256 0.276 0.315 0.315 0.315 0.295 0.315 0.354 0.354 0.374 0.413 0.472 0.512 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 CAPACITANCE in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Millimeters H T S DC/AC 630 V DC / 220 V AC Dimensions in Millimeters L H T S CAPACITANCE in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Inches H T S DC/AC 630 V DC / 220 V AC Dimensions in Inches L H T S 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 10.5 10.5 10.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 7.5 8.0 8.0 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 11.0 11.5 12.0 13.0 14.5 15.0 16.0 15.0 16.0 16.5 19.5 20.5 21.5 23.0 5.0 4.5 4.5 4.5 4.5 5.0 5.5 6.0 6.5 7.0 7.5 6.0 6.5 7.0 8.0 8.0 8.5 9.5 8.5 9.5 10.0 10.0 11.0 12.0 13.0 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 31.0 31.0 31.0 8.5 8.5 9.0 9.5 10.5 10.5 11.0 10.5 11.0 11.5 12.0 12.5 14.5 15.5 14.0 15.5 16.0 18.5 19.0 20.0 21.0 5.0 4.5 5.0 5.5 5.5 6.5 7.0 6.0 6.0 6.5 7.0 8.0 8.5 9.0 8.5 9.0 9.0 9.0 9.5 10.5 11.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 27.5 27.5 27.5 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 0.413 0.413 0.413 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142 0.295 0.315 0.315 0.315 0.335 0.354 0.374 0.394 0.413 0.433 0.453 0.433 0.453 0.472 0.512 0.571 0.591 0.630 0.591 0.630 0.650 0.768 0.807 0.846 0.906 0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.236 0.256 0.276 0.295 0.236 0.256 0.276 0.315 0.315 0.335 0.374 0.335 0.374 0.394 0.394 0.433 0.472 0.512 0.295 0.295 0.295 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.220 1.220 1.220 0.335 0.335 0.354 0.374 0.413 0.413 0.433 0.413 0.433 0.453 0.472 0.492 0.571 0.610 0.551 0.610 0.630 0.728 0.748 0.787 0.827 0.197 0.177 0.197 0.217 0.217 0.256 0.276 0.236 0.236 0.256 0.276 0.315 0.335 0.354 0.335 0.354 0.354 0.354 0.374 0.413 0.453 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 1.083 1.083 1.083 Sharma Film Capacitors SERIES Formerly MPD 3 series INTRODUCTION: The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" ± 1.0mm (0.04") for s ≤15mm(0.6”). Tolerance on "s" ± 1.5mm (0.06") for s ≤20mm(0.78”). Tolerance on "s" ± 2.0mm (0.08") for s ≤27.5mm(1.08”). PULSE RISE TIME (dv/dt) Volts per µsec. LEAD Rated Voltage 100 250 400 630 10.0 (0.40) 6 11 20 30 SPACING 15.0 (0.60) 3 7 10 15 mm (inches) 22.5 (0.89) 2 4 5.5 8 27.0 (1.06) 1 3 5 7 MKT D03 • • • • GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance≤ 1.0 µF, < 0.0150 at 1 K Hz for capacitance> 1.0 µF. Insulation resistance: For 100 VDC rated parts; ≥ 9,000 M Ohms for C≤ 0.33 µF, ≥ 3,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C. For 250 to 630 VDC rated parts; ≥ 15,000 M Ohms for C≤ 0.33 µF, ≥ 5,000 seconds for C> 0.33 µF at a temperature of 25 ± 5 °C Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 ± 5 °C. Temperature range: -55 to 85 °C. Climatic category: F M F LIFE TEST DETAILS: 1. 2. 3. 4. Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test: Capacitance change shall remain within ±5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Inches 100V • 250V • 400V • 630V Capacitance in µF L Case Dimensions in Millimeters 100V • 250V • 400V • 630V Capacitance in µF L VOLTAGE 100 V DC / 63 V AC Dimensions in Millimeters H T S DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L H T S VOLTAGE 100 V DC / 63 V AC Dimensions in Inches H T S DC/AC 250 V DC / 160 V AC Dimensions in Inches L H T S 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.5 13.5 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0 10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 12.5 14.0 15.0 13.5 16.5 19.0 21.0 22.0 23.5 24.0 26.0 5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 8.0 9.0 10.0 8.0 9.5 11.5 12.5 13.0 14.0 15.5 21.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 24.0 24.0 24.0 30.0 30.0 33.0 33.0 10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 13.0 14.0 16.0 14.0 18.0 23.0 23.0 24.0 24.0 26.0 5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 7.0 8.0 9.5 9.5 10.5 13.5 13.5 16.5 18.0 20.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 20.0 27.5 27.5 30.0 30.0 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.531 0.531 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181 0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.492 0.551 0.591 0.531 0.650 0.748 0.827 0.866 0.925 0.945 1.024 0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.315 0.354 0.394 0.315 0.374 0.453 0.492 0.512 0.551 0.610 0.846 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.945 0.945 0.945 1.181 1.181 1.299 1.299 0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.512 0.551 0.630 0.551 0.709 0.906 0.906 0.945 0.945 1.024 0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.276 0.315 0.374 0.374 0.413 0.531 0.531 0.650 0.709 0.787 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 0.787 1.083 1.083 1.181 1.181 Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Millimeters H T S DC/AC 630 V DC / 220 V AC Dimensions in Millimeters L H T S Capacitance in µF L VOLTAGE 400 V DC / 200 V AC Dimensions in Inches H T S DC/AC 630 V DC / 220 V AC Dimensions in Inches L H T S 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 24.0 30.0 30.0 30.0 33.0 33.0 10.0 10.0 10.0 11.0 11.5 12.5 11.0 14.0 16.5 16.5 17.5 18.0 21.5 24.0 26.0 28.0 5.5 6.0 6.0 6.5 7.0 7.0 6.0 8.0 9.5 10.0 10.5 10.5 12.0 14.0 18.0 21.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 20.0 27.5 27.5 27.5 30.0 30.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0 33.0 10.5 11.0 11.0 10.0 11.0 12.0 15.0 15.5 16.5 18.0 22.0 23.5 25.5 28.0 6.0 6.5 6.5 6.5 7.0 8.0 8.5 11.0 10.5 12.0 12.5 14.0 15.0 20.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5 30.0 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.945 1.181 1.181 1.181 1.299 1.299 0.394 0.394 0.394 0.433 0.453 0.492 0.433 0.551 0.650 0.650 0.689 0.709 0.846 0.945 1.024 1.102 0.217 0.236 0.236 0.256 0.276 0.276 0.236 0.315 0.374 0.394 0.413 0.413 0.472 0.551 0.709 0.827 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.787 1.083 1.083 1.083 1.181 1.181 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181 1.299 0.413 0.433 0.433 0.394 0.433 0.472 0.591 0.610 0.650 0.709 0.866 0.925 1.004 1.102 0.236 0.256 0.256 0.256 0.276 0.315 0.335 0.433 0.413 0.472 0.492 0.551 0.591 0.787 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083 1.181 Sharma Film Capacitors MKTD04 SERIES Features - Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range Operating temperature Rated Voltage Capacitance Tolerance Tangent of Loss Angle Insulation Resistance 0.001µF to 1.0µF -40 to +85°C (up to 100°C - derate voltage 1.25% per °C ) 50/63, 100, 250, 400, 630, 1000V dc ±2(G), ±5(J), ±10(K) % 0.008 or LESS (at 1KHz +25°C) Voltage Charge : 1 min at +25°C, ±5°C 50 Vdc for Vr0.33µf 1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal) +85°C, ±2°C, 1.25 x Vr, 1000Hr Cap Change: < ±5%, DF Change :