GL5PR41

LED Lamp GL5tt41 series GL5tt41 series s Outline Dimensions Colored transparency Protruded resin 1.5MAX ø5.0 ±0.15 ø5mm(T-1 3/4), Cylinder Type, Colored Transparency LED Lamps for Backlight/Indicator (Unit : mm) s Radiation Diagram (Ta=25˚C) -30˚ -20˚ -10˚ 0˚ 100 +10˚ +20˚ +30˚ +40˚ 7.85 8.6 -40˚ ±0.5 Relative luminous intensity(%) 12.4 80 +50˚ 60 (1.0) (Tie-bar cut) -50˚ -60˚ +60˚ 40 +70˚ 20 23.0MIN -70˚ 0.5±0.1 -80˚ +80˚ -90˚ 0 +90˚ 2.54NOM 2.5 0.5±0.1 Pin connections 1 Anode 2 Cathode Unspecified tolerance:±0.2 1 2 s Absolute Maximum Ratings Model No. Radiation color Radiation material GL5PR41 GL5HD41 GL5HS41 GL5HY41 GL5EG41 GL5KG41 Red Red Sunset orange Yellow Yellow-green Green GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaP Power dissipation Forward current Peak forward current P IF IFM*1 (mW) (mA) (mA) 23 84 84 84 84 84 10 30 30 30 30 30 50 50 50 50 50 50 ø5.75 (1.0) (Ta=25˚C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/˚C) VR Topr Tstg Tsol*2 (V) (˚C) (˚C) (˚C) DC Pulse 0.13 0.40 0.40 0.40 0.40 0.40 0.67 0.67 0.67 0.67 0.67 0.67 5 5 5 5 5 5 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 260 260 260 260 260 260 *1 Duty ratio=1/10, Pulse width=0.1ms *2 5s or less(At the position of 1.6mm or more from the bottom face of resin package) s Electro-optical Characteristics Lens type Model No. Forward voltage VF(V) TYP 1.9 2.0 2.0 2.0 2.1 2.1 MAX 2.3 2.8 2.8 2.8 2.8 2.8 Peak emission wavelength IF λp(nm) (mA) TYP 695 635 610 585 565 555 5 20 20 20 20 20 Luminous intensity IF IV(mcd) (mA) TYP 15 150 100 100 160 70 5 20 20 20 20 20 Spectrum radiation bandwidth IF ∆λ(nm) (mA) TYP 100 35 35 30 30 25 5 20 20 20 20 20 Reverse current VR IR(µA) (V) MAX 10 10 10 10 10 10 4 4 4 4 4 4 Terminal capacitance Ct(pF) TYP 55 20 15 35 35 40 (Ta=25˚C) Page for characteristics (MHZ) diagrams 1 1 1 1 1 1 → → → → → → GL5PR41 GL5HD41 Colored GL5HS41 transparency GL5HY41 GL5EG41 GL5KG41 (Notice) catalogs, data books, etc. Contact SHARP 48 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp PR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR HD series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) catalogs, data books, etc. Contact SHARP 118 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp HS series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (IF=20mA) 50 Forward current IF(mA) 40 Forward current IF(mA) 20 10 5 3 2 200 30 100 50 20 10 1 0 -25 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(˚C) 0 25 50 75 85 100 125 Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current 500 300 (Ta=25˚C) 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 100 50 40 100 50 30 30 20 10 5 20 10 2 0 -25 0 25 50 75 85 100 125 1 0.1 0.2 0.5 1 2 5 10 20 50 10 5 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Ambient temperature Ta(˚C) HY series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) 40 Forward current IF(mA) 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 119 LED Lamp EG series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR KG series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 100 50 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) catalogs, data books, etc. Contact SHARP 120 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP