GL8UR4

Super-luminosity LED Lamp/High-luminosity LED Lamp GL8tt4 series GL8uu4 series s Outline Dimensions (Unit : mm) 2.0 ! 3.1mm, Arch Type, Colored Transparency, High-luminosity LED Lamp for Indicator Colored transparency ø3.8±0.3 Protruded resin 0.8MAX ø3.1 2.0 -0.3 +0.1 4.1 1.0 (Tie-bar cut) 0.2+0.5 -0.2 5.2±0.3 24.0MIN 10.6±0.5 0.5±0.1 0.5±0.1 (1.0) 2.54NOM 1 2 Pin connections 1 Anode 2 Cathode Unspecified tolerance:±0.2 s Absolute Maximum Ratings Model No. Radiation color Radiation material Power dissipation Forward current Peak forward current P IF IFM (mW) (mA) (mA) (Ta=25˚C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/˚C) VR Topr Tstg Tsol*3 (V) (˚C) (˚C) (˚C) DC Pulse 0.67 4.00 4 5 -25 to +85 -25 to +85 -25 to +100 -25 to +100 260 260 75 30 50*1 0.40 GL8UR4 Red(Super-luminosity) GaA1As on GaA1As Red(High-luminosity) GaA1As on GaAs 110 50 300*2 0.67 GL8TR4 *1 Duty ratio=1/10, Pulse width=0.1ms *2 Duty ratio=1/16, Pulse width≤1ms *3 5s or less(At the position of 1.6mm or more from the bottom face of resin package) s Electro-optical Characteristics Model No. Forward voltage VF(V) TYP 1.85 1.75 MAX 2.5 2.2 Peak emission wavelength IF λp(nm) (mA) TYP 660 660 20 20 Luminous intensity IF IV(mcd) (mA) TYP 150 40 20 20 Spectrum radiation bandwidth IF ∆λ(nm) (mA) TYP 20 20 20 20 Reverse current VR IR(µA) (V) MAX 100 10 3 4 Terminal capacitance Ct(pF) TYP 25 30 (Ta=25˚C) Page for characteristics (MHZ) diagrams 1 1 → → Lens type GL8UR4 Colored transparency GL8TR4 catalogs, data books, etc. Contact SHARP 32 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp UR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) 40 Forward current IF(mA) 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR TR series Forward Current Derating Curve 70 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (1F=20mA) 60 Forward current IF(mA) Forward current IF(mA) 50 20 10 5 3 2 200 40 100 50 30 20 10 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(˚C) 1 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Forward voltage VF(V) 20 10 -20 0 20 40 60 80 100 Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 700 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current 500 (Ta=25˚C) 600 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 0.2 1 2 5 10 20 50 100 50 200 100 50 30 500 400 20 10 5 300 10 5 200 100 2 0 -20 0 20 40 60 80 100 Ambient temperature Ta(˚C) 1 0.1 0.5 2 1 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) catalogs, data books, etc. Contact SHARP 116 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP