GP1A173LCS2F

Tech Today Development News Available: July 2007 Photointerrupter with Connector GP1A173LCS2F/GP1S173LCS2F Outline Dimensions Features n Employs connector-united case and connector pin-united (Unit: mm) 8 frame. Low cost by part reduction n High operating temperature (-30 to +95 °C) Extending area to mount photointerrupter under high/low temperature condition in copier & LBP. n High reliability of connection improved by combined case & connector as one part. n Mechanical installation is compatible with conventional models. (GP1A73/GP1S73 series) SHARP mark (Center) 2.3 13.6 4.3 5 6.4 4.3 1.6 5.6 1.1 2.4 2.3 Main Specifications 2.3 OPIC output type 【GP1A173LCS2F】 Parameter Symbol Operating supply voltage VCC Low level supply current ICCL Low level output voltage VOL High level supply current ICCH High level output voltage VOH MIN. interruption time tH Response characteristics MIN. sensing time tL Operating temperature Topr 17 Characteristics 4.5 to 5.5 V MAX. 16.5 mA MAX. 0.35 V MAX. 16.5 mA MIN. VCC × 0.9 V MIN. 166 μs MIN. 166 μs -30 to +95 °C Phototransistor output type 【GP1S173LCS2F】 Parameter Symbol Characteristics Forward voltage VF 1.2 to 1.4 V Peak forward voltage VFM TYP. 3 V Reverse voltage IR MAX. 10 mA Dark current ICEO MAX. 100 nA Collector current IC MIN. 0.5 mA Collector-emitter voltage VCE (sat) MAX. 0.4 V Rise time tr MAX. 15 μs Response characteristics Fall time tf MAX. 20 μs Operating temperature Topr -30 to +95 °C 8.9 4 Internal Connection Diagram OPIC output type 【GP1A173LCS2F】 Voltage regulator Phototransistor output type 【GP1S173LCS2F】 ③ Collector ③ GND ② Vo ② GND ① Anode ① Vcc Amplifier Application n Example used in copier Cover detection (open/close) Paper detector Lens position detector Paper stock exist detector Paper pass (exit) detector Drum rotation detector Paper pass detector Paper separate detector Lineup Applications n Transmissive type photointerrupter with connector Output type Operating voltage Current model General purpose type OPIC output 5 V drive GP1A73AJ000F GP1A173LCS2F 3 V drive GP1A073LCS0F 5 V drive GP1S73PJ000F Phototransistor output ① Vcc ② Vout ③ GND 3.2 7.2 GP1S173LCS2F n Copier, Laser beam printer : New product n Under copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical for any purpose, in whole or in part, without the express written permission of SHARP. n SHARP reserves the right to make changes in the contents described herein at any time without notice. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP CORPORATION Opto-Analog Devices Division, Electronic Components Group March 2007