GP1A58HRJ00F

GP1A58HRJ00F GP1A58HRJ00F Gap : 5mm, Slit : 0.5mm *OPIC Output Case package Transmissive Photointerrupter ■ Description GP1A58HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device has a wide gap and positioning pins. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with OPIC output 2. Highlights: • Vertical Slit for alternate motion detection • Output Low Level at intercepting optical path • Positioning Pin to prevent misalignment 3. Key Parameters: • Gap Width : 5mm • Slit Width (detector side) : 0.5mm • Package : 13.7×10×5.2mm 4. Lead free and RoHS directive compliant * "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A04001EN Date Oct. 3. 2005 © SHARP Corporation GP1A58HRJ00F ■ Internal Connection Diagram Top view Voltage regulator 3 2 (15kΩ) 4 1 2 3 4 5 Anode Cathode VCC VO GND Amp 5 1 ■ Outline Dimensions Top view 13.7±0.3 5+0.2 −0.1 5.2 A58 (Unit : mm) Sharp mark “S” 2.5 (Detctor center) Model No. B-Bʼ section 1.5 0.5 A-Aʼ section C1 Date code 10MIN. 0.5 7.5 AB E 3.5 Model code 10 0.7 Aʼ Bʼ 5−0.4+0.3 −0.1 5−0.45+0.3 −0.1 (1.5) (10.3) 6.5 5 4 1 2 (1.27) (1.27) 2 • Unspecified tolerance shall be as follows ; Dimensions(d) d≤6 6