GP1FMV31RK0F

GP1FMV31RK0F GP1FMV31RK0F Fiber Optic Receiver Square connector Compact (without mounting hole) With shutter ■Description GP1FMV31RK0F employs an OPIC device that integrates a photodiode and signal processing circuit onto a single chip, and the output is at TTL levels. ■Agency approvals/Compliance 1. Compliant with JEITA RC-5720B and CP1201 2. Compliant with RoHS directive (2002/95/EC) ■Features ■Applications 1. Fiber optic receiver (Transmitter : GP1FMV31TK0F) 2. Square connector (JEITA RC-5720B) 3. Compact (without mounting hole) 4. With shutter function 5. Supply voltage : 3 V 6. Transfer rate : 15.5 Mb/s AV equipment (DVD, CD, MD players etc.) Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: E2-A00901EN Date Dec.01.2006 ©SHARP Corporation 1 GP1FMV31RK0F ■Outline Dimensions [1] Symbol A B C D Description Holder Shutter Fixing pin Lead pin (Unit: mm) Material PBT (Color : Black) PBT (Color : Black) SPCC (Lead free plating) Cu Alloy (SnCu plating) [2] (Lead root) (Lead root) Example of mounting drawing form solder side. PCB thickness t = 1.6 mm Unspecified tolerance ± 0.1 Internal equivalent circuit AMP AMP AMP Comp & output circuit *1 OPIC light detector AMP *1 OPIC is a registered trade mark of Sharp (Material : Silicon) Pin arrangement Vcc GND Vout [2]Portion marking Production year (Last digit of production year) Production month Jan to Sep: 1 - 9 10 Oct: X 11 Nov: Y 12 Dec: Z Model Number 1) The connector joint area complies with the square connector JEITA RC-5720B 2) [1] portion : “S” mark, [2] portion : Model No. and date code shall be indicated. 3) Unspecified tolerance shall be ± 0.3. 4) Since there are other products which has a different fixing pin shape, please make sure to confirm reference mounting drawing for this device. 5) Dimensions in parenthesis are shown for reference. 3 1 R Product mass : approx. 2 g Sheet No.: E2-A00901EN 2 GP1FMV31RK0F ■Absolute Maximum Ratings Parameter Supply voltage Operating temperature Storage temperature Soldering temperature *1 Output current Symbol VCC Topr Tstg Tsol IoH IoL Rating -0.5 to +7.0 -20 to +70 -30 to +80 260 380 2 10 Unit Remark V °C °C °C 6 s or less/time up to 2 times. 4 s or less/time up to 1 time. °C Soldering by hand at each terminal. *2 mA Source current mA Sink current *1 Solder at a position more than 1.6 mm away from the base of the lead terminal. Reflow is not available. *2 Do not contact top of soldering iron to lead terminal directly. ■Recommended Operating Conditions Parameter Supply voltage Operating transfer rate Receiver input optical power level Symbol VCC T PC MIN. 2.7 0.1 -24.0 TYP. 3.0 MAX. 3.6 15.5 -14.5 Unit Remark V Mb/s Notes (1), (2) dBm Peak optical output Notes (1) This operating transfer rate shall be a specification when NRZ, duty 50 % of continuous “0101···” signal is transferred. (2) The output (H/L Level) of this product are not fixed constantly when it receivers the modulating light (including DC light, no input light) less than 0.1 Mb/s. ■Electro-optical Characteristics Parameter Peak sensitivity wavelength Supply current High level output voltage Low level output voltage Rise time Fall time L → H delay time H → L delay time Pulse width distortion Jitter Symbol λp ICC VoH VoL tr tf tpLH tpHL Δtw Δtj Conditions Measurement method refer to Fig. 1 MIN. 2.1 -20 - (Ta = 25 °C, V CC = 3 V) TYP. 700 13 15 8 1 MAX. 15 0.5 180 180 +20 20 20 Unit nm mA V V ns ns ns ns ns ns ns Measurement method refer to Fig. 2, 3 Measurement method refer to Fig. 4, 5, PC = -14.5 dBm Measurement method refer to Fig. 4, 5, PC = -24 dBm Sheet No.: E2-A00901EN 3 GP1FMV31RK0F ■Measurement Method Fig. 1 Supply Current Fiber optic cable Standard transmitter GP1FMV31RK0F Device under test Vin VCC GND 3V VCC A Ammeter GND VCC Vout Input Input conditions Supply voltage Optical fiber coupling light output Standard transmitter input signal VCC = 3.0 V PC = -14.5 dBm 15.5 Mb/s NRZ, Duty 50 % or 7.75 Mb/s bi-phase mark PRBS signal Judgment method Measured on an ammeter (DC mean amperage) Sheet No.: E2-A00901EN 4 GP1FMV31RK0F Fig. 2 Output Voltage and Pulse Response Fiber optic cable Standard transmitter GP1FMV31RK0F Device under test Vin Input VCC GND 3V VCC GND VCC Vout Rso Rsi 13.2 Mb/s NRZ, Duty 50 % CH1 CH2 Oscilloscope (bandwidth : 1 GHz) Fig. 3 Input and Output Signal Standard Transmitter Input signal (CH1) tr VoH tf 50% GP1FMV31RK0F Output signal (CH2) VoL tpLH tpHL 90% 50% 10% Notes (1) VCC = 3.0V (State of operating) (2) The fiber coupling light output set at –14.5 dBm or –24.0 dBm. (3) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF. (4) Rsi, Rso: Standard load resistor (Rsi: 3.3 kΩ, Rso: 2.2 kΩ) (5) The output (H/L level) of this device are not fixed constantly when it receivers the modulating light (including DC light, no input light) less than 0.1 Mb/s. Sheet No.: E2-A00901EN 5 GP1FMV31RK0F Fig. 4 Pulse Response and Jitter Fiber optic cable Standard transmitter VCC Vin VCC GND GP1FMV31RK0F Device under test GND VCC Vout Rso Rsi 3V CH1 Oscilloscope (bandwidth : 1 GHz) Trigger ; CH1 Mode ; Storage mode Sweep ; AUTO/NORM Input CH2 Input signal 6.6 Mb/s bi-phase PRBS signal Fig. 5 Input Signal (6.6 Mb/s Bi-phase PRBS Signal) Input signal 50% GP1FMV31RK0F output Δtj Δtj 50% Notes (1) The fiber coupling light output set at –14.5 dBm or –24.0 dBm. (2) Rsi, Rso: Standard load resistor (Rsi: 3.3 kΩ, Rso: 2.2 kΩ) (3) Set the oscilloscope to the storage mode and write time to 3 seconds. Do not allow the brightness to be increased too much. The waveform would be distorted. (4) VCC = 3.0 V (State of operating) (5) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF. Sheet No.: E2-A00901EN 6 GP1FMV31RK0F ■Design and Production Notes (1) Stabilization of power supply line Please put a by-pass capacitor (0.1 μF) close to the device at least within 7 mm of the terminal. Please also put a 4.7 μF capacitor across the power supply line nearby. (2) Soldering condition Solder at the condition within the absolute maximum ratings in this sheet. In case of using flow soldering, please make sure of the conditions of process at the flow equipment. Also, do not use reflow soldering. In case of soldering by hand, do not contact top of soldering iron to lead terminal directly. (Solder at a position more than 1.6 mm away from the base of the lead terminal.) (3) About getting dirt and dust in the connector coupling portion In case dirt or dust comes into the connector coupling portion, please use a blower to take it off. Any rigid rod-like object must not be inserted since into the coupling portion. The internal device might be damaged, resulting deteriorated characteristics. (4) Cleaning Do not immerse for cleaning. The solvent would get into the connector coupling portion resulting deteriorated characteristics. Should it be necessary to remove the flux, please use one of the following solvents only to be applied with a brush. Solvent : Isopropyl alcohol, Methyl alcohol (5) Ground during assembling The human body and the soldering iron must be grounded against the static breakdown of the device during assembling. Please avoid touching the device terminals as much as possible before assembling. (6) Assembly of the device Please fix this device with soldering the metal sheet in PCB. And do not lay the PCB pattern or land for wiring where the metal sheet contacts PCB. (7) Input signal This product is designed intentionally based upon the signal transmission which is defined by the digital audio interface standard ; CP1201. When a signal out of JEITA standard CP-1201 is inputted to this device, there might be a case that this device can not receive a signal correctly from transmitting unit. (8) Fixing pin Since there are other products which has a different fixing pin shape, please make sure to confirm reference mounting drawing for this device. (9) Damage to connector coupling portion Please do not stress the connector coupling portion excessively since there might be a case that the shutter can’t operate normally. (10) About getting the flux into connector coupling portion Please avoid getting a flux into connector coupling portion of this device, because there might be a case that the characteristics deteriorate the shutter can’t operate normally. Sheet No.: E2-A00901EN 7 GP1FMV31RK0F ●Presence of ODC etc. This product shall not contain the following materials. And they are not used in the production process for this product. Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform) Specific brominated flame retardants such as the PBB and PBDE are not used in this product at all. This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC). • Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE). ■Packing Specifications PRODUCT TRAY PRODUCT Cross section of tray PACKING MATERIAL Tray : Polystyrene PACKING METHOD Each tray holds 200 pieces. Sheet No.: E2-A00901EN 8 GP1FMV31RK0F ■Important Notices · The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. · Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. · Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii) SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). · If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. · This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. · Contact and consult with a SHARP representative if there are any questions about the contents of this publication. Sheet No.: E2-A00901EN 9