GP1L51J0000F

GP1L51J0000F GP1L51J0000F Gap : 3mm, Slit : 0.5mm Darlington Phototransistor Output, Case package Transmissive Photointerrupter ■ Description GP1L51J0000F is a standard, darlington phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. The case includes additional screw fixing holes, on both sides 3.2mm diameter. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with darlington phototransistor output 2. Highlights : • Verical Slit for alternate motion detection • Includes additional screw fixing holes 3. Key Parameters : • Gap Width : 3mm • Slit Width (detector side): 0.5mm • Package : 12.2×10×18mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A03101EN Date Oct. 3. 2005 © SHARP Corporation GP1L51J0000F ■ Internal Connection Diagram Top view 3 2 1 2 3 4 4 1 Anode Cathode Collector Emitter ■ Outline Dimensions Top view 12.2±0.3 3+0.2 −0.1 (Unit : mm) A-Aʼ section 0.5 3.5 (2.5) (Detctor center) 2 AB GP1L51 B-Bʼ section 0.5 1.5 5 2−φ3.2±0.2 0.4+0.3 −0.1 Aʼ Bʼ (9.2) 10MIN. Date code 4−0.45+0.3 −0.1 (2.54) 12 18 4 1 3 2 • Unspecified tolerance shall be as follows ; Dimensions (d) d≤6 6