GP1S52VJ000F

GP1S52VJ000F GP1S52VJ000F Gap : 3mm Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter ■ Description GP1S52VJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with phototransistor output 2. Highlights : • Verical Slit for alternate motion detection 3. Key Parameters : • Gap Width : 3mm • Slit Width (detector side): 0.5mm • Package : 12.2×10×5mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A02401EN Date Oct. 3. 2005 © SHARP Corporation GP1S52VJ000F ■ Internal Connection Diagram Top view 3 2 1 2 3 4 4 1 Anode Cathode Collector Emitter ■ Outline Dimensions Top view 12.2+0.3 −0.3 3+0.2 −0.1 Model No. Sharp mark “S” A-Aʼ section 0.5 7.5 S52 (Unit : mm) 5 (2.5) 1.5 AB (Detctor center) B-Bʼ section 0.5 5 C1 Date code mark (Both side) 10MIN. 4−0.45+0.3 −0.1 (2.54) 3.5 10 2.5 Aʼ Bʼ 4−0.4+0.3 −0.1 (9.2) 4 1 3 2 • Unspecified tolerance shall be as follows ; Dimension (d) d≤6 6