GP1S59J0000F

GP1S59J0000F GP1S59J0000F Gap : 4.2mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter ■ Description GP1S59J0000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device is unique because it has a horizontal slit and a position pin to insure accurate placement on the PCB and prevent miss-orientation. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with phototransistor output 2. Highlights : • Horizontal Slit for alternate motion detection • Positioning Pin to prevent misalignment 3. Key Parameters : • Gap Width : 4.2mm • Slit Width (detector side): 0.5mm • Package : 13.5×9.3×5.2mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A02901EN Date Oct. 3. 2005 © SHARP Corporation GP1S59J0000F ■ Internal Connection Diagram Top view 3 2 1 2 4 1 Anode Cathode 3 4 Collector Emitter ■ Outline Dimensions Top view Model No. 5.2 S59 (Unit : mm) SHARP' mark "S" 13.5 AA' section 0.5 1 C ±0.3 4.2±0.2 BA 2±0.2 9.3 BB'section 0.5 Date code (Both side) 6.8 MIN 10 1.3 B' A' (2.54) 4 (10) 1 3 1.8 2 • Unspecified tolerance shall be as follows ; Dimensions (d) d≤4 4