RECORDS OF REVISION
LQ104V1LG81
SPEC No.
DATE
LD-23810A
2011/8/30
REVI
SED
No PAGE
SUMMARY
-
NOTE
- Contents -
No.
page
1
Application
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
1
2
Overview
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2
3
Mechanical Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2
4
Input Terminals
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3
5
Absolute Maximum Ratings
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
6
6
Electrical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
7
Timing characteristics of input signals
9
8
Input Signals, Basic Display Colors and Gray Scale of Each Color
9
・・・・・・・・・・・・・・・・・・・・・・
・・
11
Optical Characteristics
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
12
10
Handling Precautions
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
14
11
Packing form
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
15
12
Reliability test items
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
15
13
Others
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
16
14
Storage conditions
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
17
Fig.1
OUTLINE DIMENSIONS
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
18
Fig.3
PACKING FORM
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
19
LD-23810A- 1
1.Application
This specification applies to the color TFT-LCD module LQ104V1LG81.
This specification is the proprietary product of SHARP CORPORATION (SHARP) and include
materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in
any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express
written permission of SHARP.
The device listed in this specification was designed and manufactured for use in general electronic
equipment.
In case of using the device for applications such as control and safety equipment for transportation (controls of
aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which
require higher reliability and safety, take into consideration that appropriate measures such as fail-safe
functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,
telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment
for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in this specification .
Contact and consult with a SHARP sales representative for any questions about this device.
LD-23810A- 2
2.Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a White-LED
Backlight unit. Graphics and texts can be displayed on a 640×RGB×480dots panel with about 262,144 million
colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for
TFT-LCD panel driving and supply voltage for backlight.
The TFT-LCD panel used for this module is a low-reflection and higher-color-saturation type.
Therefore, this module is also suitable for the multimedia use.
The maximum viewing angle is in the 12 o'clock direction.
The 6 o'clock direction is difficult to reverse the grayscale.
The LED driver circuit and the PWM circuit to drive the backlight are built into the module.
3.Mechanical technical literatures
Parameter
technical literatures
Unit
Display size
26(10.4inch)Diagonal
cm
211.2(H)×158.4(V)
mm
Active area
Pixel format
640(H)×480(V)
(1pixel=R+G+B dot)
pixel
Aspect ratio
4:3
Pixel pitch
0.33(H)×0.33(V)
Pixel configuration
R,G,B vertical stripe
Display mode
Normally white
Unit outline dimensions
246.5(W)×179.3(H)×12.5(D)
mm
Mass
500
g
Surface treatment
Anti-glare and hard-coating 3H
Outline dimensions are shown in Fig.1.
mm
LD-23810A- 3
4.Input Terminals
4-1.TFT-LCD panel driving
CN1(Interface signals and +3.3V power supply)
Corresponding connectors:FI-SE20M or FI-S20S(conector) (JAE)
CN1
Pin
Symbol
Function
Remark
1
VCC
+3.3V Power supply
2
VCC
+3.3V Power supply
3
GND
GND
4
GND
GND
5
RxIN0-
LVDS receiver signal CH0 (-)
LVDS
6
RxIN0+
LVDS receiver signal CH0 (+)
LVDS
7
GND
GND
8
RxIN1-
LVDS receiver signal CH1 (-)
LVDS
9
RxIN1+
LVDS receiver signal CH1 (+)
LVDS
10
GND
GND
11
RxIN2-
LVDS receiver signal CH2 (-)
LVDS
12
RxIN2+
LVDS receiver signal CH2 (+)
LVDS
13
GND
GND
14
RXCLK IN-
LVDS receiver signal CK (-)
LVDS
15
RXCLK IN+
LVDS receiver signal CK (+)
LVDS
16
GND
GND
17
NC
18
SCAN
Horizontal/Vertical display mode select signal
19
GND
GND
20
GND
GND
【Note1】
【Note2】
【Note1】 The horizontal display start timing is settled in accordance with a rising timing of ENAB
signal. In case ENAB is fixed "Low", the horizontal start timing is determined as described in 7-1.
Don't keep ENAB “High" during operation.
【Note2】 SCAN = LOW
SCAN = HIGH
LD-23810A- 4
4-2.Data Mapping
1) When you use the transmitter in 6bits
1 cycle
R1
R0
G0
R5
G2
G1
B1
B0
B3
B2
DE
VS
R4
R3
R2
R1
G5
G4
G3
G2
G1
B1
HS
B5
B4
B3
B2
DE
R0
G0
Controller
Control IC (LVDS内蔵)
7
TxIN 7 - 13
7
TxIN14-20
RXIN0+
R0-R5,G0
RXIN0-
G1-G5,B0,B1
RXIN1+
TTL PARALLEL-TO-LVDS
B2-B5, HS,VS,DE
TxIN0 - 6
B2-B5, NA,NA,DE
RXIN1RXIN2+
RXIN2-
Internal circuits
G1-G5,B0,B1
7
LVDS-TO-PARALLEL TTL
R0-R5,G0
RXCKIN+
CK
TxCLKIN
PLL
Transmitter
Pin No
Data
24
TxIN0
26
TxIN1
27
TxIN2
29
TxIN3
30
TxIN4
31
TxIN5
33
TxIN6
34
TxIN7
35
TxIN8
37
TxIN9
39
TxIN10
40
TxIN11
41
TxIN12
43
TxIN13
45
TxIN14
46
TxIN15
47
TxIN16
1
TxIN17
2
TxIN18
4
TxIN19
5
TxIN20
CK OUT
RXCKIN-
PLL
R0 (LSB)
R1
R2
R3
R4
R5 (MSB)
G0 (LSB)
G1
G2
G3
G4
G5(MSB)
B0 (LSB)
B1
B2
B3
B4
B5(MSB)
HS
VS
DE
LD-23810A- 5
2) When you use the transmitter in 8 bits
1 cycle
R0
G0
R5
G2
G1
B1
B0
B3
B2
DE
VS
R3
R2
R1
G5
G4
G3
G2
G1
B1
HS
B5
B4
B3
B2
DE
THC63LVDM83R
G1-G5,B0,B1
7
TA 0 - 6
7
TB 0 - 6
7
TC 0 - 6
7
TD 0 - 6
B2-B5, HS,VS,DE
ALL GND
R0-R5,G0
RXIN0-
G1-G5,B0,B1
RXIN1+
B2-B5, NA,NA,DE
RXIN1-
RD 0 - 6
RXIN2+
RXIN2RXIN3+
RXIN3-
NC
NC
RXCKIN+
CK
CLK IN
PLL
Transmitter
Pin No
Data
51
TA0
52
TA1
54
TA2
55
TA3
56
TA4
3
TA5
4
TA6
6
TB0
7
TB1
11
TB2
12
TB3
14
TB4
15
TB5
19
TB6
20
TC0
22
TC1
23
TC2
24
TC3
27
TC4
28
TC5
30
TC6
50
TD0
2
TD1
8
TD2
10
TD3
16
TD4
18
TD5
25
TD6
G0
Control IC (LVDS内蔵)
RXIN0+
TTL PARALLEL-TO-LVDS
R0-R5,G0
R0
LVDS-TO-PARALLEL TTL
Controller
R4
Internal circuits
R1
CK OUT
RXCKIN-
PLL
R0 (LSB)
R1
R2
R3
R4
R5 (MSB)
G0 (LSB)
G1
G2
G3
G4
G5(MSB)
B0 (LSB)
B1
B2
B3
B4
B5(MSB)
HS
VS
DE
GND
GND
GND
GND
GND
GND
GND
LD-23810A- 6
4-3.LED backlight
LED backlight connector
CN2
Used connector
:
SM06B-SHLS-TF
( J.S.T. Mfg. Co. Ltd )
Corresponding connector
:
SHLP-06V-S-B
( J.S.T. Mfg. Co. Ltd )
Connector No.
Pin No.
symbol
function
1
VDD
+12V power supply
2
VDD
+12V power supply
3
GND
GND
4
GND
GND
5
XSTABY
Backlight ON/OFF signal
6
VBR
PWM signal
CN2
5.Absolute Maximum Ratings
Parameter
Symbol
Condition
Pin
Ratings
Unit
Remark
Supply voltage
Vcc
Ta=25℃
VCC
-0.3 ~ +4.0
V
【Note1,2】
VDD
Ta=25℃
VDD
-0.3 ~ +15.0
V
【Note1,2】
VⅠ1
Ta=25℃
SCAN
-0.3~Vcc+0.3
V
VⅠ2
Ta=25℃
-0.3~Vcc+0.3
V
VⅠ3
Ta=25℃
XSTABY, VBR
-0.3~+VDD
V
Storage temperature
TSTG
-
-
-30 ~ +80
℃
【Note1】
Operating temperature
TOPA
-
-
-30 ~ +80
℃
【Note1,3,4】
Input voltage
【Note1】
RxINi-/+
RXCLK IN-/+
i=0,1,2,3
Humidity:95%RH Max.( Ta≦40℃ ) Note static electricity.
Maximum wet-bulb temperature at 39℃ or less. (Ta>40℃) No condensation.
【Note2】
The Vcc power supply capacity must use the one of 2A or more.
The Vcc power supply capacity must use the one of 3A or more.
【Note3】
There is a possibility of causing deterioration in the irregularity and others of the screen and the display
fineness though the liquid crystal module doesn't arrive at destruction when using it at 65~80℃.
【Note4】
In the operating temperature item, the low temperature side is the ambient temperature regulations.
The high temperature side is the panel surface temperature regulations.
LD-23810A- 7
6.Electrical Characteristics
Ta=+25℃
6-1.TFT-LCD panel driving
Condition
Min.
Typ.
Max.
Unit
Remark
3.3
230
3.6
300
V
Vcc=3.3V
3.0
-
mA
【Note1】
【Note2】
VRP
-
-
100
mVP-P
Vcc = 3.3V
VIH
2.1
-
-
V
【Note3】
VIL
-
-
0.8
V
IOH
-
-
400
IOL
-400
-
-
LVDS Input voltage
VL
0
-
2.4
V
【Note4】
Terminal resistor
RT
-
100
-
Ω
-
-100
-
-
+100
-
mV
Differential input
VCM =+1.2V
mV
【Note4】
Parameter
Symbol
Supply voltage
Current dissipation
VCC
Permissive input ripple voltage
ICC
Input voltage
Input leak current
Differential input
High
VTH
Threshold voltage
Low
VTL
μA VI2 =+3.3V【Note3】
VI2 =0V 【Note3】
μA
【Note1】 On-off conditions for supply voltage
0.9 VCC
0.9 VCC
0.1 VCC
VCC
t1
t3
0.1 VCC
0
< t2 ≦ 20ms
t4
0
< t3 ≦
1s
≦ t4
t2
Data
Back light
OFF
t5
ON
t6
20μs < t1 ≦ 10ms
1s
300ms ≦ t5
OFF
300ms ≦ t6
Vcc-dip conditions
・
VCC
Vth
< VCC ≦ Vmin
td ≦ 10ms
Vmin
Vth
Vth =
Vmin =
2.5V
3V
td
・
・ VCC < Vth
Vcc-dip conditions should also follow the On-off
conditions for supply voltage
The relation between the data input and the backlight lighting will recommend the above-mentioned input sequence.
When the backlight is turned on before the panel operates, there is a possibility of abnormally displaying.
The liquid crystal module is not damaged.
【Note2】 Current dissipation
RGB RGB RGB
GS0 GS1 GS2
Typical current situation : 64-gray-bar pattern
( Vcc=+3.3V、fck = 25.18MHz、Ta=25℃)
【Note3】 SCAN
【Note4】 RXIN0-,RXIN0+,RXIN1-,RXIN1+,RXIN2-,RXIN2+,RXCLK IN-,RXCLK IN+
RGB RGB
・・・ GS62
GS63
LD-23810A- 8
6-2.LED backlight
Ta=+25℃
Parameter
Symbol
Min.
Typ.
Max.
Unit
Remark
Supply voltage
VDD
10.8
12.0
13.2
V
【Note1】
IDD1
-
400
500
mA
【Note2】
IDD2
-
-
10.0
μA
【Note3,4】
Permissive input ripple voltage
VRP_BL
-
-
200
High voltage
VIH_BL1
9.0
-
VDD
V
【Note3】
Low voltage
VIL_BL1
-
-
0.4
V
【Note3】
Leak current
IIL_XST
-
-
5.0
V
【Note3】 VDD=12V
High voltage
VIH_BL2
9.0
-
VDD
V
【Note4】
Low voltage
VIL_BL2
-
-
0.4
V
【Note4】
Leak current
IIL_VBR
-
-
1.5
V
【Note4】 VDD=12V
PWM frequency
fPWM
200
-
1,000
Hz
【Note4,5】
PWM duty ratio
DPWM
10
-
100
%
【Note4,5】
Life time
L
-
-
h
【Reference】
【Note6】
Current dissipation
XSTABY
VBR
50,000
mVP-P VDD=+12.0V
(Module)
【Note1】 On-off conditions for supply voltage
0.9 VDD
0.9 VDD
0.1 VDD
VDD
t7 t8
20μs ≦ t7≦ 200ms
0.1 VDD
t9
0ms ≦ t8≦
t10
0ms ≦ t9≦
XSTABY
200ms ≦ t10≦
t11
PWM
10ms ≦ t11≦
t12
0ms ≦ t12≦
VBR
ON
Back light
(LED)
OFF
OFF
【Note2】 Current dissipation
Typ. value: VDD= +12V、Duty=100%
Max. value: VDD= +10.8V、Duty=100%
【Note3】 XSTABY is connected by the pull-down resistor of about 2.8kΩ.
【Note4】 VBR is connected by the pull-down resistor of about 9.6kΩ.
【Note5】 PWM
fPWM = 1/t14
VBR
Duty 10% : Min. Luminance
Duty 100% : Max. Luminance
Luminance changes in proportion to the duty ratio. (t 13≧100μs)
When the frequency slows, the display fineness might decrease.
【*6】 Luminance becomes 50% of an initial value. (Ta=25℃, PWM=100%)
t13
t14
LD-23810A- 9
7.Timing characteristics of input signals
7-1.Timing characteristics
Parameter
Symbol
Min.
Typ.
Max.
Unit
Frequency
1/Tc
23.0
25.18
28.3
MHz
Horizontal period
TH
750
800
900
clock
26.5
31.8
39.0
μs
Pulse width
THP
2.0
96.0
200.0
clock
Data start position
THS
104
104
104
clock
Setup time
TVH
0
-
TH-THP
clock
Cycle
TV
515
525
560
line
Frequency
1/TV
56.0
60.0
70.0
Hz
Pulse width
TVP
1
2
32
line
Data start position
TVS
34
34
34
line
Clock
Horizontal
sync. signal
(Hsync)
Vertical
sync. signal
(Vsync)
Enable
signal
Pulse width
TEP
640
640
640
clock
Hsync-Enable signal
phase difference
THE
44.0
-
TH-664
clock
Horizontal
THD
640
640
640
clock
Vertical
TVD
480
480
480
line
display
period
Remark
【Note2】
【Note1】
【Note1】 In case of using the long vertical period, the deterioration of display quality, flicker etc. may occur.
【Note2】 When ENAB is fixed "Low", the display starts from THS(104clock) as shown in Fig.4-2.
Be careful that the module does not work when ENAB is fixed "High".
Fig 4-1
TV
TVP
Vsync
Hsync
TEP
ENAB
DATA
1 2 3 4
TVS
478
TVD
479
480
LD-23810A- 10
Fig. 4-2
TH
THP
Hsync
CK
THE
TEP
ENAB
DATA
1 2 3 4
THS
638
639
THD
7-2.Input Data Signals and Display Position on the screen
R
G
B
R
( 1, 1 )
G
B
( 2, 1 )
UP
Position where data is displayed screen(H, V)
D(1,1) D(2,1) D(3,1)
D( 640
,1)
D(1,2) D(2,2)
D(1,3)
D(1,
R G B
480
)
D( 640 , 480 )
640
LD-23810A- 11
8.Input Signals, Basic Display Colors and Gray Scale of Each Color
8-1.6 bit input
Gray Scale of Blue
Gray Scale of Green
Gray Scale of Red
Basic Color
Colors &
Gray scale
Data signal
GrayScale
R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5
Black
-
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Blue
-
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
Green
-
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Cyan
-
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
Red
-
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Magenta
-
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
Yellow
-
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
White
-
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 1
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
↓
GS62 0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Red
GS63 1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 0
0
0
0
0
0
1
0
1
1
1
1
0
0
0
0
0
0
↓
GS62 0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
Green
GS63 0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
1
1
1
↓
GS62 0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
Blue
GS63 0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0 :Low level voltage
1 :High level voltage
Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of
total 18 bit data signals, the 262,144-color display can be achieved on the screen.
LD-23810A- 12
9.Optical Characteristics
Ta=+25℃, Vcc=+3.3V
Parameter
Horizontal
Viewing
angle
range
Symbol
Min.
Typ.
Max.
Unit
70
80
-
Deg.
45
65
-
Deg.
70
80
-
Deg.
450
800
-
τr +τd
-
35
-
Wx
0.250
0.300
0.350
Wy
0.270
0.320
0.370
Rx
-
0.560
-
Ry
-
0.325
-
Gx
-
0.335
-
-
0.595
-
θ21,θ22
θ11
Vertical
White Black
CR>10
θ12
Contrast ratio
Response Time
Condition
CR
Chromaticity of
White
Chromaticity of
Red
Chromaticity of
Green
Gy
optimized
angle
θ=0°
Chromaticity of
Blue
Bx
-
0.155
-
By
-
0.120
-
Luminance of white
YL1
360
450
-
-
-
1.33
White Uniformity
Remark
【Note1,2,4】
【Note2,4】
ms
【Note3,4】
【Note4】
cd/m2
【Note4】
【Note5】
※The measurement shall be executed 30 minutes after lighting at rating.
The optical characteristics shall be measured in a dark room or equivalent state with the method shown
in Fig.2 below.
Photodetector
:Response time(BM-5A)
:Contrast/Luminance/Chromaticity(SR-3)
Photodetector:(EZ-CONTRAST)
400mm
Field=1°
Panel center(θ=0°)
Panel center(θ=0°)
TFT-LCD module
TFT-LCD module
fig.2-1 Measuring method of Viewing angle range.
fig.2-2 Measuring method of contrast, luminance, response time,
and Chromaticity.
Fig.2 Optical characteristics measurement method
【Note1】Definitions of viewing angle range:
θ22
θ12
LD-23810A- 13
Normal line
θ11 θ21
6 O'clock
【Note2】Definition of contrast ratio:
The contrast ratio is defined as the following.
Contrast (CR)=
Luminance with all pixels white
Luminance with all pixels black
【Note3】Definition of response time:
The response time is defined as the following figure and shall be measured by switching the input signal for
"black" and "white".
Photodetector Output
(Relative Value)
White
White
Black
100%
90%
10%
0%
τd
τr
Time
【Note4】This shall be measured at center of the screen.
【Note5】Definition of white uniformity:
White uniformity is defined as the following with five measurements.
(①~⑤)
δw =
160
480 pixel
3
2
Maximum luminance of 5 points(①~⑤).
Minimum luminance of 5 points(①~⑤).
320
240
1
5
120
4
360
pixel
LD-23810A- 14
10. Handling Precautions
a ) Be sure to turn off the power supply when inserting or disconnecting the cable.
b ) Since the front polarizer is easily damaged, pay attention not to scratch it.
c ) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
d ) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
e ) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Handle with care.
f ) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth
when handling. Observe all other precautionary requirements in handling components.
g ) Since there is a circuit board in the module back, stress is not added at the time of a design assembly.
Please make it like. If stress is added, there is a possibility that circuit parts may be damaged.
h ) It causes an irregular display and the defective indication, etc., when always put constant pressure
on the back of the module.
Please do not make the structure to press the back of the module.
i ) Do not expose the LCD panel to direct sunlight. Lightproof shade etc. should be attached
when LCD panel is used under such environment.
j ) Connect GND to stabilize against EMI and external noise.
k ) When handling LCD modules and assembling them into cabinets, please avoid that long-terms storage
in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent,
adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the modules.
Do not use the LCD module under such environment.
l ) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible
if it gets inside your eye or mouth by mistake.
m ) Be careful when using it for long time with fixed pattern display as it may cause accidential image.
n ) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
If adjusted value is changed, the specification may not be satisfied.
o ) If a minute particle enters in the module and adheres to an optical material, it may cause display
non-uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation
hole if you intend to install a fan.
p) An abnormal display by changing in quality of the polarizing plate might occur regardless of contact
or no contact to the polarizing plate, because of epoxy resin (amine system curing agent)
that comes out from the material and the packaging material used for the set side, the silicon adhesive
(dealcoholization system and oxime system), and the tray blowing agents (azo-compound), etc.
Please confirm adaptability with your employed material.
q ) The polarizer surface on the panel is treated with Anti-Glare for low reflection. In case of attaching
protective board over the LCD, be careful about the optical interface fringe etc. which degrades display quality.
r)
Notice : Never take to pieces the module , because it will cause failure.
Please do not peel off the Black tape pasted to the product.
s) Be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist.
LD-23810A- 15
11.Packing form
a) Piling number of cartons :
MAX.6
b) Package quantity in one carton:
20pcs
c) Carton size(TYP):
451mm(W) × 440mm(D)×313mm(H)
d) Total mass of one carton filled with full modules(20pcs): 13.5kg
Packing form is shown in Fig 3.
12.Reliability test items
6
Test item
High temperature
storage test
Low temperature
strage test
High temperature
& high humidity
operation test
High temperature
operation test
Low temperature
operation test
Vibration test
7
Shock test
No.
1
2
3
4
5
Conditions
Ambient temperature 80℃ 240H
Remark
【Note1】
Ambient temperature -30℃ 240H
【Note1】
Ambient temperature 40℃、Humidity 95% RH 240H
(No condensation.)
【Note1】
Panel surface 80℃ 240H
【Note1】
Ambient temperature -30℃ 240H
【Note1】
<Sin wave>
Frequency :10~57Hz/Vibration width (one side) :0.076mm
:57~500Hz/Gravity:9.8m/s2
Sweep time:11minutes
Test period :3H(X,Y,Z direction 1H)
Max. gravity:490m/s2 Pulse width:11ms
Direction:±X,±Y,±Z Test period :1time/1direction
【Note1】
【Note1】
【Note1】 Under the display quality test conditions with normal operation state, these shall be no change
which may affect practical display function. (normal operation state:Temperature:15~35℃,
Humidity:45~75%, Atmospheric pressure:86~106kpa)
LD-23810A- 16
13.Others
13-1.Lot No Label:
A)Module serial label
The label that displays SHARP・Model No.( LQ104V1LG81)・Lot No. is stuck on the back of the module.
Lot No display method(Figure and alphabet)
SHARP
Model No.
LQ104V1LG81
Bar Code(Lot No.)
Production year
(Last digit of dominical year)
XXXXXXXXXX
Production month (1-9X, Y, Z)
Lot No.
Serial No.
Assembly site code
Discernment code
B)Backlight serial label
The label that displays the model No. and lot No. for the backlight is stuck on the back of the module.
******-*
Model No.
(Figure and alphabet)
******-**
Lot No.
(Figure and alphabet)
13-2.Packing box Label:
The label that displays ①Model number( LQ104V1LG81) ②Lot number ③Quantity of module is stuck
on the packing box. Moreover, the display of bar code also applies to this.
社内品番:
(4S) LQ104V1LG81
Barcode(①)
Lot No. : (1T)
2011. 09. 01
**
① Model number( LQ104V1LG81)
Barcode(②)
Quantity : (Q)
② Lot number (DATA)
③ Quantity of module
20 pcs
Barcode(③)
ユーザー品番 :
シャープ物流用ラベルです。
Our management product number might be filled
(Example: LQ104V1LG81A etc.)
A right picture is written to the packing box of module for the RoHS restriction.
※ R.C.(RoHs Compliance)means these parts have corresponded with the RoHs directive.
This module corresponds from the first sample to RoHS Directive.
The production country of the figure below is written in the wrapping box.
OR
13-3. The ozone-depleting substances is not used.
13-4. If any problem occurs in relation to the description of this specification , it shall be resolved
through discussion with spirit of cooperation.
R.C.
LD-23810A- 17
14.Storage conditions
Environmental condition range of storage temperature and humidity
Temperature 0 to 40 degrees Celsius
Relative humidity 95% and below
【Note】Please refer below as a mean value of the environmental conditions.
Summer time temperature 20 to 35 degrees Celsius humidity , 85% and below
Winter time temperature 5 to 15 degrees Celsius humidity , 85% and below
Please maintain within 240 hours of accumulated length of storage time, with conditions of 40 degrees
Celsius and room humidity of 95%.
Direct sun light
Please keep the product in a dark room or cover the product to protect from direct sun light.
Atmospheric condition
Please refrain from keeping the product with possible corrosive gas or volatile flux.
Prevention of dew
Please store the product carton either on a wooden pallet or a stand / rack to prevent dew.
Do not place directly on the floor. In addition, to obtain moderate ventilation in between the pallet’s
top and bottom surfaces, pile the cartons up in a single direction and in order.
Please place the product cartons away from the storage wall.
Storage period
Within above mentioned conditions, maximum storage period should be one year.
LD-23810A- 18
Fig. 1 : LQ104V1LG81 OUTLINE DIMENSIONS
LD-23810A- 19
Fig.3 : PACKING FORM