LQ121K1LG52

RECORDS OF REVISION LQ121K1LG52 SPEC No. DATE LD-22Z02A 2010/12/3 LD-22Z02B 2011/3/2 REVI SED No PAGE SUMMARY - △1 P.9 The operating temperature is changed to "0℃" /18 ⇒"-20℃". P.9 The attention when the low temperature operates is added. P.11 Min. of XSTABY and VBR was changed. LD-22Z02C 2013/7/12 △2 P.12 Max. of TV was changed. (831 ⇒ 852) P.21 X direction of outline dimensions was changed. （2.0mm ⇒ 1.59mm） LD-22Z02D 2013/9/17 △3 LD-22Z02E 2014/2/28 △4 P.9,18 P.3 Corresponding connectors is changed. TOPA：-20℃～70℃ ⇒ -30℃～80℃ TSTG：-30℃～70℃ ⇒ -30℃～80℃ NOTE - Contents - No. page 1 Application ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 2 Overview ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 3 Mechanical Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 4 Input Terminals ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 5 Absolute Maximum Ratings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9 6 Electrical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10 7 Timing characteristics of input signals 12 8 Input Signals, Basic Display Colors and Gray Scale of Each Color 9 ・・・・・・・・・・・・・・・・・・・・・・ ・・ 13 Optical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15 10 Handling Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17 11 Packing form ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18 12 Reliability test items ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18 13 Others ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19 14 Storage conditions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20 Fig.1 OUTLINE DIMENSIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21 Fig.3 PACKING FORM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22 LD-22Z02E- 1 1．Application This specification applies to the color TFT-LCD module LQ121K1LG52. This specification is the proprietary product of SHARP CORPORATION (SHARP) and include materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. The device listed in this specification was designed and manufactured for use in general electronic equipment. In case of using the device for applications such as control and safety equipment for transportation (controls of aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into TOPA：-20℃～70℃ ⇒ -30℃～80℃ functions and redundant system design shou TSTG：-30℃～70℃ => -30℃～80℃ Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support. SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply with the instructions and the precautions specified in this specification . Contact and consult with a SHARP sales representative for any questions about this device. LD-22Z02E- 2 2．Overview 　　 This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). 　　It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a White-LED 　　Backlight unit. Graphics and texts can be displayed on a 1280×RGB×800dots panel with about 16 million 　　colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for 　　TFT-LCD panel driving and supply voltage for backlight. The maximum viewing angle is in the 6o'clock direction. The 12o'clock direction is difficult to reverse the grayscale. The LED driver circuit is built into the module. 3．Mechanical technical literatures Parameter technical literatures Unit Display size 31（12.1inch）Diagonal cm 261.1（H)×163.2（V) mm Active area Pixel format 1280（H)×800（V) (1pixel＝R＋G＋B dot) pixel Aspect ratio 16：10 Pixel pitch 0.204（H)×0.204（V) Pixel configuration R,G,B vertical stripe Display mode Normally white Unit outline dimensions 278.0（W)×184.0（H)×8.6(D) mm Mass 550 g Surface treatment Anti-glare and hard-coating 3H Outline dimensions are shown in Fig.1. mm LD-22Z02E- 3 4．Input Terminals 4-1．TFT-LCD panel driving CN1（Interface signals and +3.3V power supply） Using connectors：DF14H-20P-1.25H(56)　(Hirose Electric Co., Ltd.) Corresponding connectors：DF14-20S-1.25C(conector)　(Hirose Electric Co., Ltd.) △3 　　　　　　　　：DF14-2628SCFA(terminal)　(Hirose Electric Co., Ltd.) Using LVDS receiver：Building into cotroll IC（THC63LVDF84B（Thine electronics）　or　Compatible product） Corresponding LVDS transmitter：THC63LVDM83R（Thine electronics） or　Compatible product CN1 Pin Symbol Function 1 VCC +3.3V Power supply 2 VCC +3.3V Power supply 3 GND GND 4 GND GND 5 RxIN0- LVDS receiver signal CH0 (-) LVDS 6 RxIN0+ LVDS receiver signal CH0 (+) LVDS 7 GND GND 8 RxIN1- LVDS receiver signal CH1 (-) LVDS 9 RxIN1+ LVDS receiver signal CH1 (+) LVDS 10 GND GND 11 RxIN2- LVDS receiver signal CH2 (-) LVDS 12 RxIN2+ LVDS receiver signal CH2 (+) LVDS 13 GND GND 14 CK IN- LVDS receiver signal CK (-) LVDS 15 CK IN+ LVDS receiver signal CK (+) LVDS 16 GND GND 17 RxIN3- LVDS receiver signal CH3 (-) LVDS 18 RxIN3+ LVDS receiver signal CH3 (+) LVDS 19 RL/UD Horizontal/Vertical display mode select signal 【*1】 20 SELLVDS LVDS SET 【*2】 【*1】 　RL/UD = LOW 【*2】 SELLVDS is shown in 4-2. Remark 　RL/UD = HIGH LD-22Z02E- 4 4-2．Data Mapping 1) 8 bit input 　 pin assignment with SELLVDS pin 　(THC63LVDM83R（Thine electronics） or　Compatible product) Transmitter 20Pin SELLVDS Pin No Data = L(GND) or Open = H(3.3V) 51 TA0 R0 (LSB) R2 52 TA1 R1 R3 54 TA2 R2 R4 55 TA3 R3 R5 56 TA4 R4 R6 3 TA5 R5 R7 (MSB) 4 TA6 G0 (LSB) G2 6 TB0 G1 G3 7 TB1 G2 G4 11 TB2 G3 G5 12 TB3 G4 G6 14 TB4 G5 G7 (MSB) 15 TB5 B0 (LSB) B2 19 TB6 B1 B3 20 TC0 B2 B4 22 TC1 B3 B5 23 TC2 B4 B6 24 TC3 B5 B7 (MSB) 27 TC4 (HS) (HS) 28 TC5 (VS) (VS) 30 TC6 DE DE 50 TD0 R6 R0 (LSB) 2 TD1 R7 (MSB) R1 8 TD2 G6 G0 (LSB) 10 TD3 G7 (MSB) G1 16 TD4 B6 B0 (LSB) 18 TD5 B7 (MSB) B1 25 TD6 (NA) (NA) LD-22Z02E- 5 < SELLVDS = L(GND) or Open > 1 CYCLE R1 R0 G0 R5 R4 R3 R2 R1 R0 G0 G2 G1 B1 B0 G5 G4 G3 G2 G1 B1 B3 B2 DE B5 B4 B3 B2 DE R7 R6 NA G7 G6 R7 R6 NA (VS) (HS) B7 B6 < SELLVDS = H(3.3V) > 1 CYCLE R3 R2 G2 R7 R6 R5 R4 R3 R2 G2 G4 G3 B3 B2 G7 G6 G5 G4 G3 B3 B5 B4 DE B7 B6 B5 B4 DE R1 R0 NA G1 G0 R1 R0 NA DE：DATA ENABLE HS：Hsync VS：Vsync NA：Non Available (VS) (HS) B1 B0 LD-22Z02E- 6 2) 6bit input 　 pin assignment with SELLVDS　(THC63LVDM83R（Thine electronics） or　Compatible product) Transmitter 20Pin SELLVDS Pin No Data = L(GND) or Open = H(3.3V) 51 TA0 - R0 (LSB) 52 TA1 - R1 54 TA2 - R2 55 TA3 - R3 56 TA4 - R4 3 TA5 - R5 (MSB) 4 TA6 - G0 (LSB) 6 TB0 - G1 7 TB1 - G2 11 TB2 - G3 12 TB3 - G4 14 TB4 - G5 (MSB) 15 TB5 - B0 (LSB) 19 TB6 - B1 20 TC0 - B2 22 TC1 - B3 23 TC2 - B4 24 TC3 - B5 (MSB) 27 TC4 - (HS) 28 TC5 - (VS) 30 TC6 - DE 50 TD0 - GND 2 TD1 - GND 8 TD2 - GND 10 TD3 - GND 16 TD4 - GND 18 TD5 - GND 25 TD6 - (NA) LD-22Z02E- 7 < SELLVDS = H(3.3V) > 1 CYCLE R1 R0 G0 R5 R4 R3 R2 R1 R0 G0 G2 G1 B1 B0 G5 G4 G3 G2 G1 B1 B3 B2 DE B5 B4 B3 B2 DE (VS) (HS) DE：DATA ENABLE HS：Hsync VS：Vsync NA：Non Available ( Recommended input (17pin, 18pin at 6bit ) LVDS Transmitter No.17Pin LOW DATE No.18Pin 470Ω 3.3V No.17Pin 240Ω No.18Pin LCD Module LVDS Receiver or 100Ω 4-3．LED backlight 　　LED backlight connector CN2 Used connector ： SM06B-SHLS-TF ( J.S.T. Mfg. Co. Ltd ) Corresponding connector ： SHLP-06V-S-B ( J.S.T. Mfg. Co. Ltd ) Connector No. CN2 Pin No. symbol function 1 VDD +12V power supply 2 VDD +12V power supply 3 GND GND 4 GND GND 5 XSTABY Backlight ON/OFF signal 6 VBR PWM signal LD-22Z02E- 8 4-4．Interface block diagram (Computer Side) ①8 bit input (TFT-LCD side) SELLVDS = L(GND) or Open B2-B5, NA,NA,DE 7 7 7 TB 0 - 6 TC 0 - 6 TD 0 - 6 R6,R7,G6,G7, RXIN0RXIN1+ RXIN1RXIN2+ RXIN2RXIN3+ RXIN3- Single LVDS interface contained in a control IC RA 0 - 6 RB 0 - 6 RC 0 - 6 RD 0 - 6 Internal circuits G1-G5,B0,B1 RXIN0+ TA 0 - 6 TTL PARALLEL-TO-LVDS R0-R5,G0 THC63LVDM83R 7 LVDS-TO-PARALLEL TTL Controller TOPA：-20℃～70℃ ⇒ -30℃～80℃ TSTG：-30℃～70℃ => -30℃～80℃ RXCKIN+ CＬK IN CK PLL RXＣKIN- PLL CK OUT ②8 bit input SELLVDS = H(3.3V) G3-G7,B2,B3 7 B4-B7, NA,NA,DE 7 7 RXIN0+ TA 0 - 6 TB 0 - 6 TC 0 - 6 TD 0 - 6 R0,R1,G0,G1, TTL PARALLEL-TO-LVDS R2-R7,G2 RXIN0 RXIN0RXIN1+ RXIN1RXIN2+ RXIN2RXIN3+ RXIN3- Single LVDS interface contained in a control IC RA 0 - 6 RB 0 - 6 RC 0 - 6 RD 0 - 6 Internal circuits THC63LVDM83R 7 LVDS-TO-PARALLEL TTL L Controller RXCKIN+ CＬK IN CK PLL RXＣKIN- PLL CK OUT ③6 bit input SELLVDS = H(3.3V) TA 0 - 6 G1-G5,B0,B1 7 TB 0 - 6 7 TC 0 - 6 7 TD 0 - 6 B2-B5, NA,NA,DE ALL GND RXIN0+ TTL PARALLEL-TO-LVDS R0-R5,G0 RXIN0RXIN1+ RXIN1RXIN2+ RXIN2RXIN3+ RXIN3- Single LVDS interface contained in a control IC RA 0 - 6 RB 0 - 6 RC 0 - 6 RD 0 - 6 RXCKIN+ CK CＬK IN PLL RXＣKIN- PLL CK OUT Internal circuits THC63LVDM83R 7 LVDS-TO-PARALLEL TTL Controlle LD-22Z02E- 9 5．Absolute Maximum Ratings Parameter Symbol Condition Pin Ratings Unit Remark Supply voltage Vcc Ta=25℃ VCC -0.3　～ +4.0 V 【*1,2】 VDD Ta=25℃ VDD -0.3 ～ +15.0 V 【*1,2】 VⅠ1 Ta=25℃ -0.3～Vcc+0.3 V i=0,1,2,3 VⅠ2 Ta=25℃ RL/UD,SELLVDS -0.3～Vcc+0.3 V VⅠ4 Ta=25℃ XSTABY, VBR -0.3～+VDD V △4 Storage temperature TSTG － - -30　～ +80 ℃ 【*1】 △1,4 Operating temperature TOPA － - -30　～ +80 ℃ 【*1,3,4】 Input voltage 【*1】 RxINi-/+ CK IN-/+ Humidity：95%RH Max.( Ta≦40℃ ) Note static electricity. Maximum wet-bulb temperature at 39℃ or less. (Ta>40℃) No condensation. 【*2】 The Vcc power supply capacity must use the one of 2A or more. The Vcc power supply capacity musTOPA：-20℃～70℃ ⇒ -30℃～80℃ 【*3】 There is a possibility of causing det TSTG：-30℃～70℃ => -30℃～80℃ the display fineness though the liquid crystal module doesn't arrive at destruction when using it △1,4 at 65～80℃ or -30～0℃. There is a possibility of causing the fineness deterioration by the prolonged use in the (high temperature) humidity environment (60% or more). 【*4】 In the operating temperature item, the low temperature side is the ambient temperature regulations. The high temperature side is the panel surface temperature regulations. LD-22Z02E- 10 6．Electrical Characteristics Ta＝+25℃ 6-1．TFT-LCD panel driving Min. Typ. Max. Unit Remark 3.0 3.3 3.6 V 【*1】 - 450 750 mA 【*2】 VL 0 － 2.4 V VRP － － mVP-P － 200 VCM +100 mV Vcc = 3.3V VCM =+1.2V － － mV 【*3】 【*4】 Parameter Symbol Supply voltage VCC Current dissipation ICC Input voltage width for LVDS receiver Permissive input ripple voltage Condition Vｃｃ=3.3V Differential input High VTH Threshold voltage Low VTL － VCM -100 VIH 2.1 － － V VIL － － 0.8 V IOH － － 400 μA IOL -10 － +10 μA － 100 － Ω Input voltage Input reak current RT Terminal resistor OPA 【*1】 On-off conditions for supply voltage 0.9 VCC t1 t3 Back light OFF t5 ON t6 20μs ＜ t1 ≦ 10ms 0.1 VCC 0 ＜ t2 ≦ 20ms t4 0 ＜ t3 ≦ 1s ≦ t4 t2 Data Differential input TSTG：-30℃～70℃ => -30℃～80℃ 0.9 VCC 0.1 VCC VCC VI2 = +3.3V【*4】 VI2 =0V 【*4】 1s 300ms ≦ t5 OFF 200ms ≦ t6 Vcc-dip conditions ・ VCC Vth ＜ VCC ≦ Vmin td ≦ 10ms Vmin Vth Vth = Vmin = 2.5V 3V ・ VCC ＜ Vth Vcc-dip conditions should also follow the On-off conditions for supply voltage td ・  ・  Hsync/Vsync need not be input so that this model may drive only by the ENAB signal. Even if Hsync/Vsync is input, it doesn't become a malfunction. The relation between the data input and the backlight lighting will recommend the above-mentioned input sequ When the backlight is turned on before the panel operates, there is a possibility of abnormally displaying. The liquid crystal module is not damaged. 【*2】　Current dissipation Typical current situation : 253-gray-bar pattern （ Vcc=+3.3V、fck = 83.5MHz、Ta=25℃） 【*3】 VCM ：　LVDS 【*3】　V ： LVDS common mode voltage 【*4】　RL/UD , SELLVDS RGB RGB RGB GS0 GS1 GS2 ・・・ RGB RGB GS251 GS252 LD-22Z02E- 11 6-2．LED backlight Ta＝+25℃ Parameter Symbol Min. Typ. Max. Unit Remark Supply voltage VDD 10.2 12.0 13.8 V 【*1】 IDD1 - 370 650 mA 【*2】 IDD2 - - 10.0 μA Permissive input ripple voltage VRP_BL - - 100.0 High voltage VIH_BL1 2.4 - VDD V 【*3】 Low voltage VIL_BL1 - - 0.4 V 【*3】 High voltage VIH_BL2 2.1 - VDD V 【*4】 Low voltage VIL_BL2 - - 0.4 V 【*4】 PWM frequency fPWM 200.0 - 1k Hz 【*4,5】 PWM duty DPWM 10.0 - 100.0 % 【*4,5】 Life time L - - h 【Reference】 【*6】 Current dissipation △2 △2 XSTABY VBR (50,000) mVP-P VDD=+12.0V (Module) TSTG：-30℃～70℃ => -30℃～80℃ 【*1】 On-off conditions for supply voltage 0.9 VDD 0.9 VDD 0 1 VDD 0.1 VDD t7 t8 20μs ≦ t7≦ 200ms 0 1 VDD 0.1 t9 0ms ≦ t8≦ t10 0ms ≦ t9≦ 200ms ≦ t10≦ XSTABY t11 PWM 10ms ≦ t11≦ t12 0ms ≦ t12≦ VBR ON Back light (LED) OFF OFF 【*2】 Current dissipation Typ. value：　VDD= +12V、Duty=100% Max. value：　VDD= +10.2V、Duty=100% 【*3】 XSTABY is connected by the pull-down resistor of 33kΩ. 【*4】 VBR is connected by the pull-down resistor of 33kΩ. 【*5】 PWM fPWM　＝　1/t14 VBR Duty 10% : Min. Luminance（0%：LED OFF） Duty 100% : Max. Luminance Luminance changes in proportion to the duty ratio. (t13≧500μs) When the frequency slows, the display fineness might decrease. 【*6】 Luminance becomes 50% of an initial value. (Ta＝25℃, PWM=100%) t13 t14 LD-22Z02E- 12 7．Timing characteristics of input signals 7-1．Timing characteristics Parameter Symbol Min. Typ. Max. Unit Frequency 1/Tc 70.0 83.5 85.0 MHz Horizontal period TH 1480 1680 1880 clock 17.4 20.1 - μs Horizontal period (High) THd 1280 1280 1280 clock Vertical Frequency TV 810 831 852 line 15.9 16.7 - ms Vertical period (High) TVd 800 800 800 line Clock △2 ENAB Remark 【*1】 【*1】 In case of using the long vertical period, the deterioration of display quality, flicker etc. may occur. TH THd TOPA：-20℃～70℃ ⇒ -30℃～80℃ ENAB TSTG：-30℃～70℃ => -30℃～80℃ 1280 DATA (R G B) (R,G,B) 1 1280 2 800 1 799 2 ENAB TVd TV 7-2．Input Data Signals and Display Position on the screen R G B R G B （ 2, 1 ） （ 1, 1 ） D(1,1) D(2,1) D(3,1) D( 1280 ,1) D(1,2) D(2,2) D(1,3) D(1, R G B 800 ) D( 1280 , 800 ) 800 LD-22Z02E- 13 8．Input Signals, Basic Display Colors and Gray Scale of Each Color 8-1．8 bit input Data signal Gray Scale of Blue Gray Scale of Green Gray Scale of Red Basic Color Colors & Gray scale Gray Scale R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 Black － 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue － 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 Green － 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Cyan － 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 Ｘ Ｘ 1 1 1 1 1 1 Red － Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Magenta － Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 Yellow － Ｘ Ｘ 1 1 1 1 1 1 Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 White － Ｘ Ｘ 1 1 1 1 1 1 Ｘ Ｘ 1 1 1 1 1 1 Ｘ Ｘ 1 1 1 1 1 1 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 1 0 0 0 TO 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 1 0 0 TS 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ Brighter GS250 0 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ GS251 1 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red GS252 Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ Brighter GS250 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 ↓ GS251 0 0 0 0 0 0 0 0 1 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 Green GS252 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ Brighter GS250 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 ↓ GS251 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 1 1 1 1 1 Blue GS252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ｘ Ｘ 1 1 1 1 1 1 0 :Low level voltage 1 :High level voltage Ｘ :Don’t care Each basic color can be displayed in253 gray scales from 8 bit data signals. According to the combination of、 total 24 bit data signals, the 16-million-color display can be achieved on the screen. LD-22Z02E- 14 8-2．6 bit input Gray Scale of Blue Gray Scale of Green Gray Scale of Red Basic Color Colors & Gray scale Data signal GrayScale R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Black － 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue － 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Green － 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Cyan － 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Red － 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Magenta － 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow － 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White － 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter GS61 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 ↓ GS62 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Red GS63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ↑ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter GS61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 ↓ GS62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 Green GS63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↑ GS1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ↑ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter GS61 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 ↓ GS62 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 Blue GS63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen. LD-22Z02E- 15 9．Optical Characteristics Ta=+25℃, Vcc=＋3.3V Parameter Horizontal Viewing angle range Symbol Min. Typ. Max. Unit 70 80 - Deg. 45 65 - Deg. 70 80 - Deg. 450 800 - τr +τd - 30 - Wx 0.260 0.310 0.360 Wy 0.285 0.335 0.385 Rx - 0.630 - Ry - 0.345 - Gx - 0.315 - ～70℃ ⇒ - 0.630 - ～70℃ => - 0.150 - θ21,θ22 θ11 Vertical White Black CR>10 θ12 Contrast ratio Response Time Condition CR Chromaticity of White Chromaticity of Red Chromaticity of Green Gy optimized angle θ=0° Bx Chromaticity of Blue By - 0.075 - Luminance of white YL1 320 400 - - - 1.33 White Uniformity Remark 【*1,2,4】 【*2,4】 【*3,4】 ms 【*4】 cd/m 2 【*4】 【*5】 ※The measurement shall be executed 30 minutes after lighting at rating. 　The optical characteristics shall be measured in a dark room or equivalent state with the method shown in Fig.2 below. Photodetector ：Response time（BM-5A） ：Contrast/Luminance/Chromaticity（SR-3） Photodetector：(EZ-CONTRAST） 400mm Field=1° Panel center(θ=0°） Panel center(θ=0°) TFT-LCD module TFT-LCD module fig.2-1 Measuring method of Viewing angle range. fig.2-2 Measuring method of contrast, luminance, response time, and Chromaticity. Fig.2　Optical characteristics measurement method LD-22Z02E- 16 【*1】Definitions of viewing angle range: θ22 θ1 Normal line θ1 θ21 6 O'clock 【*2】Definition of contrast ratio: The contrast ratio is defined as the following. Contrast （CR）＝ Luminance with all pixels white Luminance with all pixels black 【*3】Definition of response time: The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white". Photodeteector Output (Reelative Value) White White Black 100% 90% 10% 0% τd τr Time 【*4】This shall be measured at center of the screen. 【*5】Definition of white uniformity: White uniformity is defined as the following with five measurements. (①～⑤) δw = 320 2 Maximum luminance of 5 points(①～⑤). Minimum luminance of 5 points(①～⑤). 640 960 pixel 3 400 1 5 200 4 600 pixel LD-22Z02E- 17 10． Handling Precautions a ) Be sure to turn off the power supply when inserting or disconnecting the cable. b ) Since the front polarizer is easily damaged, pay attention not to scratch it. c ) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. d ) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. e ) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Handle with care. f ) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth when handling. Observe all other precautionary requirements in handling components. g ) Since there is a circuit board in the module back, stress is not added at the time of a design assembly. Please make it like. If stress is added, there is a possibility that circuit parts may be damaged. h ) It causes an irregular display and the defective indication, etc., when always put constant pressure on the back of the module. Please do not make the structure to p TOPA：-20℃～70℃ ⇒ -30℃～80℃ i ) Do not expose the LCD panel to directTSTG：-30℃～70℃ => -30℃～80℃ when LCD panel is used under such environment. j ) Connect GND to stabilize against EMI and external noise. k ) When handling LCD modules and assembling them into cabinets, please avoid that long-terms storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the modules. Do not use the LCD module under such environment. l ) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible if it gets inside your eye or mouth by mistake. m ) Be careful when using it for long time with fixed pattern display as it may cause accidential image. n ) Adjusting volume have been set optimally before shipment, so do not change any adjusted value. If adjusted value is changed, the specification may not be satisfied. o ) If a minute particle enters in the module and adheres to an optical material, it may cause display non-uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation hole if you intend to install a fan. p) The polarizer surface on the panel is treated with Anti-Glare for low reflection. In case of attaching protective board over the LCD, be careful about the optical interface fringe etc. which degrades display quality. q ) Notice : Never take to pieces the module , because it will cause failure. Please do not peel off the Black tape pasted to the product. r) An abnormal display by changing in quality of the polarizing plate might occur regardless of contact or no contact to the polarizing plate, because of epoxy resin (amine system curing agent) that comes out from the material and the packaging material used for the set side, the silicon adhesive (dealcoholization system and oxime system), and the tray blowing agents (azo-compound), etc. Please confirm adaptability with your employed material. LD-22Z02E- 18 11．Packing form a) Piling number of cartons　： MAX．5 b) Package quantity in one carton： 20pcs c) Carton size(TYP)： 460mm(W) × 426mm(D)×341mm(H) d) Total mass of one carton filled with full modules(20pcs)： 14kg 12．Reliability test items △4 No. 1 2 3 △4 △1 4 5 6 7 △1,4 8 Test item High temperature storage test Low temperature strage test High temperature & high humidity operation test High temperature operation test Low temperature operation test Vibration test Conditions 　Ambient temperature 80℃ 240H Remark 【Note1】 　Ambient temperature -30℃ 240H 【Note1】 　Ambient temperature 40℃、Humidity 95％ RH 240H （No condensation.） 【Note1】 　Panel surface 80℃ 240H 【Note1】 　Ambient temperature -30℃ 240H 【Note1】 　＜Sin wave＞ 　　Frequency ：10～57Hz／Vibration width (one side) ：0.076mm 　　　　 ：57～500Hz／Gravity：9.8m/s2 　　Sweep time：11minutes 　Test period ：3H（X，Y，Z direction 1H） Shock test Max. gravity：490m/s2 Pulse width：11ms 　Direction：±X,±Y,±Z Test period ：1time／1direction Thermal shock test 　-30℃[0.5h]～80℃[0.5h]／50cycles 【Note1】 【Note1】 【Note1】 【Note1】 Under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function. (normal operation state：Temperature:15～35℃, Humidity:45～75％, Atmospheric pressure:86～106kpa) LD-22Z02E- 19 13．Others 13-１．Lot No Label: Ａ）Module serial label The label that displays SHARP･Model No.（ LQ121K1LG52）･Lot No. is stuck on the back of the module. Lot No display method（Figure and alphabet） SHARP Model No. LQ121K1LG52 Bar Code(Lot No.) XXXXXXXXXX Production year (Last digit of dominical year) Production month (1-9X, Y, Z) Lot No. Serial No. Assembly site code Discernment code Ｂ）Backlight serial label The label that displays the model No. and lot No. for the backlight is stuck on the back of the module. ＊＊＊＊＊＊-＊ Model No. (Figure alphabet) ：-20℃～70℃ TOPAand ⇒ -30℃～80℃ LotTNo. STG：-30℃～70℃ => -30℃～80℃ ＊＊＊＊＊＊－＊＊ (Figure and alphabet) 13-2．Packing box Label: The label that displays ①Model number（ LQ121K1LG52） ②Lot number ③Quantity of module is stuck on the packing box. Moreover, the display of bar code also applies to this. 社内品番： (4S) LQ121K1LG52 Barcode（①） Lot No. ：　（1T） 2009. 06. 01 ＊＊ Barcode（②） Quantity ：　（Q） ① Model number（ LQ121K1LG52） ② Lot number (DATA) ③ Quantity of module 20 pcs Barcode（③） ユーザー品番　： シャープ物流用ラベルです。 Our management product number might be filled （Example： LQ121K1LG52A etc.） A right picture is written to the packing box of module for the RoHS restriction. 　※ R.C.（RoHs Compliance）means these parts have corresponded with the RoHs directive. 　This module corresponds from the first sample to RoHS Directive.　　 13-3． The ozone-depleting substances is not used. 13-4． If any problem occurs in relation to the description of this specification , it shall be resolved through discussion with spirit of cooperation. RC LD-22Z02E- 20 14．Storage conditions Environmental condition range of storage temperature and humidity Temperature　　　　　0 to 40 degrees Celsius Relative humidity 95% and below 【Note】Please refer below as a mean value of the environmental conditions. Summer time temperature 20 to 35 degrees Celsius humidity , 85% and below Winter time temperature 5 to 15 degrees Celsius humidity , 85% and below Please maintain within 240 hours of accumulated length of storage time, with conditions of 40 degrees Celsius and room humidity of 95%. Direct sun light Please keep the product in a dark room or cover the product to protect from direct sun light. 　　　Atmospheric condition Please refrain from keeping the product with possible corrosive gas or volatile flux. Prevention of dew Please store the product carton either on a wooden pallet or a stand / rack to prevent dew. Do not place directly on the floor. In addition, to obtain moderate ventilation in between the pallet’s top and bottom surfaces, pile the cartons up in a single direction and in order. Please place the product cartons away from the storage wall. Storage period 　　 Within above mentioned conditions, maximum storage period should be one year. LD-22Z02E- 21 TOPA：-20℃～70℃ ⇒ -30℃～80℃ TSTG：-30℃～70℃ => -30℃～80℃ △2 Fig. 1 ： LQ121K1LG52 ＯＵＴＬＩＮＥ ＤＩＭＥＮＳＩＯＮＳ LD-22Z02E- 22 TOPA：-20℃～70℃ ⇒ -30℃～80℃ TSTG：-30℃～70℃ => -30℃～80℃ Fig.3　:　PACKING FORM