Technical Document
LCD Specification
LCD Group
LQ150X1LG91 LCD Module
Product Specification
September 2010
XGA module with True Industrial-rated
LED backlight at 50,000 hours and built-in
backlight driver; high contrast of 800:1
and brightness of 350 nits.
RECORDS OF REVISION
LQ150X1LG91
SPEC No.
DATE
LD-22902A
2010/9/15
REVI
SED
No PAGE
SUMMARY
-
NOTE
- Contents -
No.
page
1
Application
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
1
2
Overview
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2
3
Mechanical Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2
4
Input Terminals
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3
5
Absolute Maximum Ratings
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
9
6
Electrical Characteristics ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
10
7
Timing characteristics of input signals
12
8
Input Signals, Basic Display Colors and Gray Scale of Each Color
9
・・・・・・・・・・・・・・・・・・・・・・
・・
13
Optical Characteristics
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
15
10
Handling Precautions
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
17
11
Packing form
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
18
12
Reliability test items
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
18
13
Others
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
19
14
Storage conditions
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
20
Fig.1
OUTLINE DIMENSIONS
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
21
Fig.3
PACKING FORM
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
22
LD-22902A- 1
1．Application
This specification applies to the color TFT-LCD module LQ150X1LG91.
This specification is the proprietary product of SHARP CORPORATION (SHARP) and include
materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in
any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express
written permission of SHARP.
The device listed in this specification was designed and manufactured for use in general electronic
equipment.
In case of using the device for applications such as control and safety equipment for transportation (controls of
aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which
require higher reliability and safety, take into consideration that appropriate measures such as fail-safe
functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,
telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment
for life support.
SHARP assumes no responsibility for any damage resulting from the use of the device which does not comply
with the instructions and the precautions specified in this specification .
Contact and consult with a SHARP sales representative for any questions about this device.
LD-22902A- 2
2．Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a White-LED
Backlight unit. Graphics and texts can be displayed on a 1024×RGB×768dots panel with about 16 million
colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply voltages for
TFT-LCD panel driving and supply voltage for backlight.
The maximum viewing angle is in the 6o'clock direction.
The 12o'clock direction is difficult to reverse the grayscale.
The LED driver circuit and the PWM circuit to drive the backlight are built into the module.
3．Mechanical technical literatures
Parameter
technical literatures
Unit
Display size
38（15inch）Diagonal
cm
Active area
304.1（H)×228.1（V)
mm
Pixel format
1024（H)×768（V)
(1pixel＝R＋G＋B dot)
pixel
Aspect ratio
4：3
Pixel pitch
0.297（H)×0.297（V)
Pixel configuration
R,G,B vertical stripe
Display mode
Normally white
Unit outline dimensions
326.5（W)×253.5（H)×9.6(D)
mm
Mass
950 （Max.）
g
Surface treatment
Anti-glare and hard-coating 3H
Outline dimensions are shown in Fig.1.
mm
LD-22902A- 3
4．Input Terminals
4-1．TFT-LCD panel driving
CN1（Interface signals and +3.3V power supply）
Using connectors：DF14H-20P-1.25H(56) (Hirose Electric Co., Ltd.)
Corresponding connectors：DF14-20S-1.25C(conector) (Hirose Electric Co., Ltd.)
：DF14-2628SCF(terminal) (Hirose Electric Co., Ltd.)
Using LVDS receiver：Building into cotroll IC（THC63LVDF84B（Thine electronics） or Compatible product）
Corresponding LVDS transmitter：THC63LVDM83R（Thine electronics） or Compatible product
CN1
Pin
Symbol
Function
1
VCC
+3.3V Power supply
2
VCC
+3.3V Power supply
3
GND
GND
4
GND
GND
5
RxIN0-
LVDS receiver signal CH0 (-)
LVDS
6
RxIN0+
LVDS receiver signal CH0 (+)
LVDS
7
GND
GND
8
RxIN1-
LVDS receiver signal CH1 (-)
LVDS
9
RxIN1+
LVDS receiver signal CH1 (+)
LVDS
10
GND
GND
11
RxIN2-
LVDS receiver signal CH2 (-)
LVDS
12
RxIN2+
LVDS receiver signal CH2 (+)
LVDS
13
GND
GND
14
CK IN-
LVDS receiver signal CK (-)
LVDS
15
CK IN+
LVDS receiver signal CK (+)
LVDS
16
GND
GND
17
RxIN3-
LVDS receiver signal CH3 (-)
LVDS
18
RxIN3+
LVDS receiver signal CH3 (+)
LVDS
19
RL/UD
Horizontal/Vertical display mode select signal
【*1】
20
SELLVDS
LVDS SET
【*2】
【*1】 RL/UD = LOW
【*2】 SELLVDS is shown in 4-2.
Remark
RL/UD = HIGH
LD-22902A- 4
4-2．Data Mapping
1) 8 bit input
pin assignment with SELLVDS pin (THC63LVDM83R（Thine electronics） or Compatible product)
Transmitter
20Pin SELLVDS
Pin No
Data
= L(GND) or Open
= H(3.3V)
51
TA0
R0 (LSB)
R2
52
TA1
R1
R3
54
TA2
R2
R4
55
TA3
R3
R5
56
TA4
R4
R6
3
TA5
R5
R7 (MSB)
4
TA6
G0 (LSB)
G2
6
TB0
G1
G3
7
TB1
G2
G4
11
TB2
G3
G5
12
TB3
G4
G6
14
TB4
G5
G7 (MSB)
15
TB5
B0 (LSB)
B2
19
TB6
B1
B3
20
TC0
B2
B4
22
TC1
B3
B5
23
TC2
B4
B6
24
TC3
B5
B7 (MSB)
27
TC4
(HS)
(HS)
28
TC5
(VS)
(VS)
30
TC6
DE
DE
50
TD0
R6
R0 (LSB)
2
TD1
R7 (MSB)
R1
8
TD2
G6
G0 (LSB)
10
TD3
G7 (MSB)
G1
16
TD4
B6
B0 (LSB)
18
TD5
B7 (MSB)
B1
25
TD6
(NA)
(NA)
LD-22902A- 5
< SELLVDS = L(GND) or Open >
1 CYCLE
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
B3
B2
DE
B5
B4
B3
B2
DE
R7
R6
NA
G7
G6
R7
R6
NA
(VS) (HS)
B7
B6
< SELLVDS = H(3.3V) >
1 CYCLE
R3
R2
G2
R7
R6
R5
R4
R3
R2
G2
G4
G3
B3
B2
G7
G6
G5
G4
G3
B3
B5
B4
DE
B7
B6
B5
B4
DE
R1
R0
NA
G1
G0
R1
R0
NA
DE：DATA ENABLE
HS：Hsync
VS：Vsync
(VS) (HS)
B1
B0
LD-22902A- 6
1) 6bit input
pin assignment with SELLVDS (THC63LVDM83R（Thine electronics） or Compatible product)
Transmitter
20Pin SELLVDS
Pin No
Data
= L(GND) or Open
= H(3.3V)
51
TA0
-
R0 (LSB)
52
TA1
-
R1
54
TA2
-
R2
55
TA3
-
R3
56
TA4
-
R4
3
TA5
-
R5 (MSB)
4
TA6
-
G0 (LSB)
6
TB0
-
G1
7
TB1
-
G2
11
TB2
-
G3
12
TB3
-
G4
14
TB4
-
G5 (MSB)
15
TB5
-
B0 (LSB)
19
TB6
-
B1
20
TC0
-
B2
22
TC1
-
B3
23
TC2
-
B4
24
TC3
-
B5 (MSB)
27
TC4
-
(HS)
28
TC5
-
(VS)
30
TC6
-
DE
50
TD0
-
GND
2
TD1
-
GND
8
TD2
-
GND
10
TD3
-
GND
16
TD4
-
GND
18
TD5
-
GND
25
TD6
-
(NA)
LD-22902A- 7
< SELLVDS = H(3.3V) >
1 CYCLE
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
B3
B2
DE
B5
B4
B3
B2
DE
(VS) (HS)
DE：DATA ENABLE
HS：Hsync
VS：Vsync
4-3．LED backlight
LED backlight connector
CN2
Used connector
：
SM06B-SHLS-TF
( J.S.T. Mfg. Co. Ltd )
Corresponding connector
：
SHLP-06V-S-B
( J.S.T. Mfg. Co. Ltd )
Connector No.
CN2
Pin No.
symbol
function
1
VDD
+12V power supply
2
VDD
+12V power supply
3
GND
GND
4
GND
GND
5
XSTABY
Backlight ON/OFF signal
6
VBR
PWM signal
LD-22902A- 8
4-3．Interface block diagram
(Computer Side)
①8 bit input
SELLVDS = L(GND) or Open
7 TA 0 - 6
RXIN0+
G1-G5,B0,B1
7 TB 0 - 6
7 TC 0 - 6
RXIN0-
B2-B5, NA,NA,DE
R6,R7,G6,G7,
B6,B7,NA
7
TD 0 - 6
TTL PARALLEL-TO-LVDS
R0-R5,G0
RXIN1+
RXIN1RXIN2+
RXIN2RXIN3+
RXIN3-
Single LVDS interface contained in a control IC
RA 0 - 6
RB 0 - 6
RC 0 - 6
RD 0 - 6
Internal circuits
THC63LVDM83R
LVDS-TO-PARALLEL TTL
Controller
(TFT-LCD side)
RXCKIN+
CＬK IN
CK
PLL
RXＣKIN-
PLL
CK OUT
②8 bit input
SELLVDS = H(3.3V)
B4-B7, NA,NA,DE
R0,R1,G0,G1,
B0,B1,NA
RXIN0+
7 TB 0 - 6
7 TC 0 - 6
RXIN0-
7
TD 0 - 6
RXIN1+
RXIN1RXIN2+
RXIN2RXIN3+
RXIN3-
Single LVDS interface contained in a control IC
RA 0 - 6
RB 0 - 6
RC 0 - 6
RD 0 - 6
Internal circuits
G3-G7,B2,B3
7 TA 0 - 6
TTL PARALLEL-TO-LVDS
R2-R7,G2
THC63LVDM83R
LVDS-TO-PARALLEL TTL
Controller
RXCKIN+
CＬK IN
CK
PLL
RXＣKIN-
PLL
CK OUT
③6 bit input
SELLVDS = H(3.3V)
RXIN0+
G1-G5,B0,B1
7 TB 0 - 6
7 TC 0 - 6
RXIN0-
B2-B5, NA,NA,DE
ALL GND
7
TD 0 - 6
TTL PARALLEL-TO-LVDS
R0-R5,G0
RXIN1+
RXIN1RXIN2+
RXIN2RXIN3+
RXIN3-
Single LVDS interface contained in a control IC
RA 0 - 6
RB 0 - 6
RC 0 - 6
RD 0 - 6
RXCKIN+
CK
CＬK IN
PLL
RXＣKIN-
PLL
CK OUT
Internal circuits
THC63LVDM83R
7 TA 0 - 6
LVDS-TO-PARALLEL TTL
Controller
LD-22902A- 9
5．Absolute Maximum Ratings
Parameter
Symbol
Condition
Pin
Ratings
Unit
Remark
Supply voltage
Vcc
Ta=25℃
VCC
-0.3 ～ ＋4.0
V
【*1,2】
VDD
Ta=25℃
VDD
-0.3 ～ ＋15.0
V
【*1,2】
VⅠ1
Ta=25℃
-0.3～Vcc+0.3
V
i=0,1,2,3
VⅠ2
Ta=25℃
RL/UD,SELLVDS
-0.3～Vcc+0.3
V
VⅠ4
Ta=25℃
XSTABY, VBR
-0.3～+VDD
V
Storage temperature
TSTG
－
-
-30 ～ ＋70
℃
【*1】
Operating temperature
TOPA
－
-
0 ～ ＋70
℃
【*1,3,4】
Input voltage
【*1】
RxINi-/+
CK IN-/+
Humidity：95%RH Max.( Ta≦40℃ ) Note static electricity.
Maximum wet-bulb temperature at 39℃ or less. (Ta>40℃) No condensation.
【*2】
The Vcc power supply capacity must use the one of 2A or more.
The Vcc power supply capacity must use the one of 3A or more.
【*3】
There is a possibility of causing deterioration in the irregularity and others of the screen and the display
fineness though the liquid crystal module doesn't arrive at destruction when using it at 65～70℃.
【*4】
In the operating temperature item, the low temperature side is the ambient temperature regulations.
The high temperature side is the panel surface temperature regulations.
LD-22902A- 10
6．Electrical Characteristics
Ta＝+25℃
6-1．TFT-LCD panel driving
Condition
Min.
Typ.
Max.
Unit
Remark
3.3
300
3.6
400
V
Vｃｃ=3.3V
3.0
-
mA
【*1】
【*2】
VL
0
－
2.4
V
VRP
－
－
mVP-P
－
200
VCM +100
mV
Vcc=3.3V
VCM =+1.2V
－
－
mV
【*3】
【*4】
Parameter
Symbol
Supply voltage
Current dissipation
VCC
Input voltage width for LVDS receiver
Permissive input ripple voltage
ICC
Differential input
High
VTH
Threshold voltage
Low
VTL
－
VCM -100
VIH
2.1
－
－
V
VIL
－
－
0.8
V
IOH
－
－
400
μA
VI2 =+3.3V 【*4】
IOL
-10
－
－
100
+10
－
μA
VI2 =0V 【*4】
Ω
Differential input
Input voltage
Input reak current
Terminal resistor
RT
【*1】 On-off conditions for supply voltage
0.9 VCC
0.9 VCC
0.1 VCC
VCC
t1
t3
0.1 VCC
0
＜ t2 ≦ 20ms
t4
0
＜ t3 ≦
1s
≦ t4
t2
Data
Back light
OFF
t5
ON
t6
20us ＜ t1 ≦ 10ms
1s
300ms ≦ t5
OFF
200ms ≦ t6
Vcc-dip conditions
・ Vth
VCC
＜ VCC ≦ Vmin
td ≦ 10ms
Vmin
Vth
Vth =
Vmin =
2.5V
3V
td
・
・
・ VCC ＜ Vth
Vcc-dip conditions should also follow the On-off
conditions for supply voltage
Hsync/Vsync need not be input so that this model may drive only by the ENAB signal.
Even if Hsync/Vsync is input, it doesn't become a malfunction.
The relation between the data input and the backlight lighting will recommend the above-mentioned input sequ
When the backlight is turned on before the panel operates, there is a possibility of abnormally displaying.
The liquid crystal module is not damaged.
【*2】 Current dissipation
Typical current situation : 253-gray-bar pattern
（ Vcc=+3.3V、fck = 65MHz、Ta=25℃）
【*3】 VCM ： LVDS common mode voltage
【*4】 RL/UD , SELLVDS
RGB RGB RGB
GS0 GS1 GS2
RGB RGB
・・・ GS251
GS252
LD-22902A- 11
6-2．LED backlight
Ta＝+25℃
Parameter
Symbol
Min.
Typ.
Max.
Unit
Remark
Supply voltage
VDD
10.2
12.0
13.8
V
【*1】
IDD1
-
480
700
mA
【*2】
IDD2
-
-
10.0
μA
Permissive input ripple voltage
VRP_BL
-
-
200.0
High voltage
VIH_BL1
9.0
-
VDD
V
【*3】
Low voltage
VIL_BL1
-
-
0.4
V
【*3】
High voltage
VIH_BL2
9.0
-
VDD
V
【*4】
Low voltage
VIL_BL2
-
-
0.4
V
【*4】
PWM frequency
fPWM
200.0
-
1k
Hz
【*4,5】
PWM duty
DPWM
10.0
-
100.0
%
【*4,5】
Life time
L
-
-
h
【Reference】
【*6】
Current dissipation
XSTABY
VBR
(50,000)
mVP-P VDD=+12.0V
(Module)
【*1】 On-off conditions for supply voltage
0.9 VDD
0.9 VDD
0.1 VDD
VDD
t7 t8
20us ≦ t7≦ 200ms
0.1 VDD
t9
0ms ≦ t8≦
t10
0ms ≦ t9≦
XSTABY
200ms ≦ t10≦
t11
PWM
10ms ≦ t11≦
t12
0ms ≦ t12≦
VBR
ON
Back light
(LED)
OFF
OFF
【*2】 Current dissipation
Typ. value： VDD=+12.0V、Duty=100%
Max. value： VDD=+10.2V、Duty=100%
【*3】 XSTABY is connected by the pull-down resistor of 33kΩ.
【*4】 VBR is connected by the pull-down resistor of 33kΩ.
【*5】 PWM
fPWM ＝ 1/t14
VBR
Duty 0% : Min. Luminance
Duty 100% : Max. Luminance
Luminance changes in proportion to the duty ratio. (t 13≧10μs)
When the frequency slows, the display fineness might decrease.
【*6】 Luminance becomes 50% of an initial value. (Ta＝25℃, PWM=100%)
t13
t14
LD-22902A- 12
7．Timing characteristics of input signals
7-1．Timing characteristics
Symbol
Min.
Typ.
Max.
Unit
Frequency
1/Tc
50.0
65
80.0
MHz
Horizontal period
TH
1056
1344
1720
clock
16.0
20.7
23.4
μs
Horizontal period (High)
THd
1024
1024
1024
clock
Vertical Frequency
TV
772
806
990
line
13.3
16.7
18.0
ms
Vertical period (High)
TVd
768
768
768
line
Parameter
Clock
ENAB
Remark
【*1】
【*1】 In case of using the long vertical period, the deterioration of display quality, flicker etc. may occur.
TH
THd
ENAB
1
1024
DATA
(R,G,B)
2
1024
Tc
768
1
767
2
ENAB
TVd
TV
7-2．Input Data Signals and Display Position on the screen
R
G
B
R
（ 1, 1 ）
G
B
（ 2, 1 ）
D(1,1) D(2,1) D(3,1)
D( 1024
,1)
D(1,2) D(2,2)
D(1,3)
D(1,
R G B
768
)
D( 1024 , 768 )
768
LD-22902A- 13
8．Input Signals, Basic Display Colors and Gray Scale of Each Color
8-1．8 bit input
Data signal
Gray Scale of Blue
Gray Scale of Green
Gray Scale of Red
Basic Color
Colors &
Gray scale
Gray
Scale
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7
Black
－
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Blue
－
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
Green
－
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
Cyan
－
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
Ｘ
Ｘ
1
1
1
1
1
1
Red
－
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Magenta
－
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
Yellow
－
Ｘ
Ｘ
1
1
1
1
1
1
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
White
－
Ｘ
Ｘ
1
1
1
1
1
1
Ｘ
Ｘ
1
1
1
1
1
1
Ｘ
Ｘ
1
1
1
1
1
1
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
↑
↑
↑
↑
↓
↓
↓
↓
↓
Brighter
GS250
1
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↓
GS251
1
1
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red
GS252
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
↑
↑
↑
↑
↓
↓
↓
↓
↓
Brighter
GS250
0
0
0
0
0
0
0
0
1
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
↓
GS251
0
0
0
0
0
0
0
0
1
1
0
1
1
1
1
1
0
0
0
0
0
0
0
0
Green
GS252
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
0
0
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
↑
↑
↑
↑
↑
↓
↓
↓
↓
↓
Brighter
GS250
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
1
1
1
1
1
↓
GS251
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
1
1
1
Blue
GS252
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Ｘ
Ｘ
1
1
1
1
1
1
0 :Low level voltage
1 :High level voltage
Ｘ :Don’t care
Each basic color can be displayed in253 gray scales from 8 bit data signals. According to the combination of、
total 24 bit data signals, the 16-million-color display can be achieved on the screen.
LD-22902A- 14
8-2．6 bit input
Gray Scale of Blue
Gray Scale of Green
Gray Scale of Red
Basic Color
Colors &
Gray scale
Data signal
GrayScale
R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5
Black
－
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Blue
－
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
Green
－
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Cyan
－
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
Red
－
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Magenta
－
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
Yellow
－
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
White
－
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 1
0
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
↓
GS62 0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Red
GS63 1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 0
0
0
0
0
0
1
0
1
1
1
1
0
0
0
0
0
0
↓
GS62 0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
Green
GS63 0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Black
GS0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↑
GS1
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
Darker
GS2
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
↑
↓
↓
↓
↓
↓
↓
↓
↓
↓
Brighter
GS61 0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
1
1
1
↓
GS62 0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
Blue
GS63 0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of
total 18 bit data signals, the 262,144-color display can be achieved on the screen.
LD-22902A- 15
9．Optical Characteristics
Ta=+25℃, Vcc=＋3.3V
Parameter
Horizontal
Viewing
angle
range
Symbol
Min.
Typ.
Max.
Unit
70
80
-
Deg.
45
65
-
Deg.
70
80
-
Deg.
450
800
-
τr +τd
-
30
-
Wx
0.255
0.305
0.355
Wy
0.275
0.325
0.375
Rx
-
0.560
-
Ry
-
0.330
-
Gx
-
0.335
-
-
0.595
-
θ21,θ22
θ11
Vertical
White Black
CR>10
θ12
Contrast ratio
Response Time
Condition
CR
Chromaticity of
White
Chromaticity of
Red
Chromaticity of
Green
Gy
optimized
angle
θ=0°
Chromaticity of
Blue
Bx
-
0.155
-
By
-
0.115
-
Luminance of white
YL1
280
350
-
-
-
1.33
White Uniformity
Remark
【*1,2,4】
【*2,4】
ms
【*3,4】
【*4】
cd/m2
【*4】
【*5】
※The measurement shall be executed 30 minutes after lighting at rating.
The optical characteristics shall be measured in a dark room or equivalent state with the method shown
in Fig.2 below.
Photodetector
：Response time（BM-5A）
：Contrast/Luminance/Chromaticity（SR-3）
Photodetector：(EZ-CONTRAST）
400mm
Field=1°
Panel center(θ=0°）
Panel center(θ=0°)
TFT-LCD module
TFT-LCD module
fig.2-1 Measuring method of Viewing angle range.
fig.2-2 Measuring method of contrast, luminance, response time,
and Chromaticity.
Fig.2 Optical characteristics measurement method
【*1】Definitions of viewing angle range:
θ22
θ12
LD-22902A- 16
Normal line
θ11 θ21
6 O'clock
【*2】Definition of contrast ratio:
The contrast ratio is defined as the following.
Contrast （CR）＝
Luminance with all pixels white
Luminance with all pixels black
【*3】Definition of response time:
The response time is defined as the following figure and shall be measured by switching the input signal for
"black" and "white".
Photodetector Output
(Relative Value)
White
White
Black
100%
90%
10%
0%
τd
τr
Time
【*4】This shall be measured at center of the screen.
【*5】Definition of white uniformity:
White uniformity is defined as the following with five measurements.
(①～⑤)
δw =
256
768 pixel
3
2
Maximum luminance of 5 points(①～⑤).
Maximum luminance of 5 points(①～⑤).
512
384
1
5
192
4
576
pixel
LD-22902A- 17
10． Handling Precautions
a ) Be sure to turn off the power supply when inserting or disconnecting the cable.
b ) Since the front polarizer is easily damaged, pay attention not to scratch it.
c ) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
d ) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
e ) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Handle with care.
f ) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth
when handling. Observe all other precautionary requirements in handling components.
g ) Since there is a circuit board in the module back, stress is not added at the time of a design assembly.
Please make it like. If stress is added, there is a possibility that circuit parts may be damaged.
h ) It causes an irregular display and the defective indication, etc., when always put constant pressure
on the back of the module.
Please do not make the structure to press the back of the module.
i ) Do not expose the LCD panel to direct sunlight. Lightproof shade etc. should be attached
when LCD panel is used under such environment.
j ) Connect GND to stabilize against EMI and external noise.
k ) When handling LCD modules and assembling them into cabinets, please avoid that long-terms storage
in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent,
adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the modules.
Do not use the LCD module under such environment.
l ) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible
if it gets inside your eye or mouth by mistake.
m ) Be careful when using it for long time with fixed pattern display as it may cause accidential image.
n ) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
If adjusted value is changed, the specification may not be satisfied.
o ) If a minute particle enters in the module and adheres to an optical material, it may cause display
non-uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation
hole if you intend to install a fan.
p) The polarizer surface on the panel is treated with Anti-Glare for low reflection. In case of attaching
protective board over the LCD, be careful about the optical interface fringe etc. which degrades display
quality.
q ) Notice : Never take to pieces the module , because it will cause failure.
Please do not peel off the Black tape pasted to the product.
r)
An abnormal display by changing in quality of the polarizing plate might occur regardless of contact
or no contact to the polarizing plate, because of epoxy resin (amine system curing agent)
that comes out from the material and the packaging material used for the set side, the silicon adhesive
(dealcoholization system and oxime system), and the tray blowing agents (azo-compound), etc.
Please confirm adaptability with your employed material.
LD-22902A- 18
11．Packing form
a) Piling number of cartons ：
MAX．6
b) Package quantity in one carton：
10pcs
c) Carton size(TYP)：
450mm(W) × 312mm(D)×400mm(H)
d) Total mass of one carton filled with full modules(10pcs)： 9.8kg
12．Reliability test items
No.
1
2
3
4
5
6
7
8
Test item
High temperature
storage test
Low temperature
strage test
High temperature
& high humidity
operation test
High temperature
operation test
Low temperature
operation test
Vibration test
Conditions
Ambient temperature 70℃ 240H
Remark
【Note1】
Ambient temperature -30℃ 240H
【Note1】
Ambient temperature 40℃、Humidity 95％ RH 240H
（No condensation.）
【Note1】
Panel surface 70℃ 240H
【Note1】
Ambient temperature 0℃ 240H
【Note1】
＜Sin wave＞
Frequency ：10～57Hz／Vibration width (one side) ：0.076mm
：57～500Hz／Gravity：9.8m/s2
Sweep time：11minutes
Test period ：3H（X，Y，Z direction 1H）
Shock test
Max. gravity：490m/s2 Pulse width：11ms
Direction：±X,±Y,±Z Test period ：1time／1direction
Thermal shock test -30℃[0.5h]～70℃[0.5h]／50cycles
【Note1】
【Note1】
【Note1】
【Note1】 Under the display quality test conditions with normal operation state, these shall be no change
which may affect practical display function. (normal operation state：Temperature:15～35℃,
Humidity:45～75％, Atmospheric pressure:86～106kpa)
LD-22902A- 19
13．Others
13-１．Lot No Label:
Ａ）Module serial label
The label that displays SHARP･Model No.（ LQ150X1LG91）･Lot No. is stuck on the back of the module.
Lot No display method（Figure and alphabet）
SHARP
Model No.
LQ150X1LG91
Bar Code(Lot No.)
XXXXXXXXXX
Production year
(Last digit of dominical year)
Production month (1-9X, Y, Z)
Lot No.
Serial No.
Assembly site code
Discernment code
Ｂ）Backlight serial label
The label that displays the model No. and lot No. for the backlight is stuck on the back of the module.
＊＊＊＊＊＊-＊
Model No.
(Figure and alphabet)
＊＊＊＊＊＊－＊＊
Lot No.
(Figure and alphabet)
13-2．Packing box Label:
The label that displays ①Model number（ LQ150X1LG91） ②Lot number ③Quantity of module is stuck
on the packing box. Moreover, the display of bar code also applies to this.
社内品番：
(4S) LQ150X1LG91
Barcode（①）
Lot No. ： （1T）
2009. 06. 01
＊＊
Barcode（②）
Quantity ： （Q）
① Model number（ LQ150X1LG91）
② Lot number (DATA)
③ Quantity of module
10 pcs
Barcode（③）
ユーザー品番 ：
シャープ物流用ラベルです。
Our management product number might be filled
（Example： LQ150X1LG91A etc.）
A right picture is written to the packing box of module for the RoHS restriction.
※ R.C.（RoHs Compliance）means these parts have corresponded with the RoHs directive.
This module corresponds from the first sample to RoHS Directive.
13-3． The ozone-depleting substances is not used.
13-4． If any problem occurs in relation to the description of this specification , it shall be resolved
through discussion with spirit of cooperation.
R.C.
LD-22902A- 20
14．Storage conditions
Environmental condition range of storage temperature and humidity
Temperature 0 to 40 degrees Celsius
Relative humidity 95% and below
【Note】Please refer below as a mean value of the environmental conditions.
Summer time temperature 20 to 35 degrees Celsius humidity , 85% and below
Winter time temperature 5 to 15 degrees Celsius humidity , 85% and below
Please maintain within 240 hours of accumulated length of storage time, with conditions of 40 degrees
Celsius and room humidity of 95%.
Direct sun light
Please keep the product in a dark room or cover the product to protect from direct sun light.
Atmospheric condition
Please refrain from keeping the product with possible corrosive gas or volatile flux.
Prevention of dew
Please store the product carton either on a wooden pallet or a stand / rack to prevent dew.
Do not place directly on the floor. In addition, to obtain moderate ventilation in between the pallet’s
top and bottom surfaces, pile the cartons up in a single direction and in order.
Please place the product cartons away from the storage wall.
Storage period
Within above mentioned conditions, maximum storage period should be one year.
LD-22902A- 21
Fig. 1 ： LQ150X1LG91 ＯＵＴＬＩＮＥ ＤＩＭＥＮＳＩＯＮＳ
LD-22902A- 22
Fig.3 : PACKING FORM
Technical Document
LCD Specification
LCD Group
NORTH AMERICA
Sharp Microelectronics of the Americas
5700 NW Pacific Rim Blvd.
Camas, WA 98607, U.S.A.
Phone: (1) 360-834-8700
Fax: (1) 360-834-8903
www.sharpsma.com
TAIWAN
Sharp Electronic Components
(Taiwan) Corporation
8F-A, No. 16, Sec. 4, Nanking E. Rd.
Taipei, Taiwan, Republic of China
Phone: (886) 2-2577-7341
Fax: (886) 2-2577-7326/2-2577-7328
CHINA
Sharp Microelectronics of China
(Shanghai) Co., Ltd.
28 Xin Jin Qiao Road King Tower 16F
Pudong Shanghai, 201206 P.R. China
Phone: (86) 21-5854-7710/21-5834-6056
Fax: (86) 21-5854-4340/21-5834-6057
Head Office:
No. 360, Bashen Road,
Xin Development Bldg. 22
Waigaoqiao Free Trade Zone Shanghai
200131 P.R. China
Email: smc@china.global.sharp.co.jp
EUROPE
Sharp Microelectronics Europe
Division of Sharp Electronics (Europe) GmbH
Sonninstrasse 3
20097 Hamburg, Germany
Phone: 49 (0)180 507 35 07
Fax: (49) 40-2376-2232
www.sharpsme.com
JAPAN
Sharp Corporation
Electronic Components & Devices
22-22 Nagaike-cho, Abeno-Ku
Osaka 545-8522, Japan
Phone: (81) 6-6621-1221
Fax: (81) 6117-725300/6117-725301
www.sharp-world.com
SINGAPORE
Sharp Electronics (Singapore) PTE., Ltd.
438A, Alexandra Road, #05-01/02
Alexandra Technopark,
Singapore 119967
Phone: (65) 271-3566
Fax: (65) 271-3855
HONG KONG
Sharp-Roxy (Hong Kong) Ltd.
Level 26, Tower 1, Kowloon Commerce Centre,
No. 51, Kwai Cheong Road, Kwai Chung,
New Territories, Hong Kong
Phone: (852) 28229311
Fax: (852) 28660779
www.sharp.com.hk
Shenzhen Representative Office:
Room 602-603, 6/F.,
International Chamber of Commerce Tower,
168 Fuhua Rd. 3, CBD,
Futian District, Shenzhen 518048,
Guangdong, P.R. China
Phone: (86) 755-88313505
Fax: (86) 755-88313515
KOREA
Sharp Electronic Components
(Korea) Corporation
RM 501 Geosung B/D, 541
Dohwa-dong, Mapo-ku
Seoul 121-701, Korea
Phone: (82) 2-711-5813 ~ 8
Fax: (82) 2-711-5819
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Suggested applications (if any) are for standard use; See Important Restrictions for
limitations on special applications. See Limited Warranty for SHARP’s product warranty.
The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE,
ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or responsible in
any way, for any incidental or consequential economic or property damage.
工商网监
湘ICP备2023018690号
