Dichromatic Leadless Chip LED
LT1❏❏67A series
1616 Size, 0.8mm Thickness,
Compact Dichromatic Leadless
Chip LED
LT1❏❏67A series
■ Outline Dimensions
(Unit : mm)
■ Directive Characteristics
(Ta=25˚C)
1.6±0.15
4
1
H.S.D
-60˚
Recommended PWB pattern for soldering
1.0
1.6
0.3
0.5
-80˚
+40˚
80
E.K
60
+60˚
40
20
+80˚
Soldering area
0.3
0.8
Relative luminous intensity(%)
1.6±0.15
2
+20˚
100
-40˚
3
0˚
-20˚
0.8
0.8
1.2
0.6
1.2
X
0˚
-20˚
(0.4)
(0.6)
series
KS
Pin
1 Anode
4 Cathode Green
3 Cathode Sunset
2 Anode orange
E.K
EH
ED
Yellow-green Yellow-green
Yellow
-60˚
Red
3.Unspecified tolerance:±0.1
-80˚
Relative luminous intensity(%)
1.Plating area
Resist
2.Pin connections
+20˚
100
-40˚
+40˚
80
H.S.D
60
+60˚
40
20
+80˚
Y
*1
■ Absolute Maximum Ratings
Model No. Emitting color
Material
(Ta=25˚C)
Power dissipation Forward current Peak forward current
P
IF
IFM*2
(mW)
(mA)
(mA)
Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature
(mA/˚C)
VR
Topr
Tstg
Tsol*3
(V)
(˚C)
(˚C)
(˚C)
DC Pulse
-30 to +85 -40 to +100
5
0.40 0.67
50
30
84
Yellow-green GaP
-30 to +85 -40 to +100
5
0.40 0.67
50
30
84
GaAsP on GaP
Yellow
-30 to +85 -40 to +100
Green
5
0.40 0.67
50
30
84
GaP
LT1KS67A
-30 to +85 -40 to +100
Sunset orange GaAsP on GaP
5
0.40 0.67
50
30
84
-30 to +85 -40 to +100
Yellow-green GaP
5
0.40 0.67
50
30
84
LT1ED67A
-30 to +85 -40 to +100
5
0.40 0.67
50
30
84
GaAsP on GaP
Red
*1 The value is specified under the condition that either color is lightened separately. When the both diodes are lightened simultaneously,
the power dissipation of each diode should be less than the half of the value specified in this table.
*2 Duty ratio=1/10, Pulse width=0.1ms
*3 For 3s or less at the temperature of hand soldering. Temperature of reflow soldering is shown on page 2.
LT1EH67A
■ Electro-optical Characteristics
Radiation
Lens
Model No.
color
type
Yellow-green
Yellow
Milky
Green
diffusion LT1KS67A Sunset orange
Yellow-green
LT1ED67A
Red
LT1EH67A
42
Notice
Internet
Forward voltage
VF(V)
TYP
2.1
2.0
2.1
2.0
2.1
2.0
MAX
2.8
2.8
2.8
2.8
2.8
2.8
350
350
350
350
350
350
(Ta=25˚C)
Peak emission wavelength
λp(nm)
TYP
565
585
555
610
565
635
IF
(mA)
20
20
20
20
20
20
Luminous intensity
IF
IV(mcd)
(mA)
TYP
19.0
20
8.3
20
3.8
20
6.9
20
19.0
20
8.8
20
Spectrum radiation bandwidth
IF
∆λ(nm)
(mA)
TYP
30
20
30
20
25
20
35
20
30
20
35
20
Reverse current
VR
IR(µA)
(V)
MAX
10
4
10
4
10
4
10
4
10
4
10
4
Page for
characteristics
(MHZ)
diagrams
1
59
1
58
1
59
1
58
1
59
1
57
Terminal capacitance
Ct(pF)
TYP
35
35
40
15
35
20
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
Characteristics Diagrams
PR,P series
Forward Current Derating Curve
Forward Current vs. Forward Voltage(Note)
60
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
(Ta=25˚C)
1000
500
50
40
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
10
5.0
1.0
0.5
100
50
10
5.0
10
0
-30
0
25
50
75 85
100
0.1
1.0
125
1.0
1.2
1.4
Ambient temperature Ta(˚C)
1.6
1.8
2.0
2.2
2.4
-20
2.6
0
Luminous Intensity vs. Forward Current(Note)
Peak Forward Current Derating Curve
40
60
80
100
120
Duty Ratio vs. Peak Forward Current
(Ta=25˚C)
1000
60
20
Ambient temperature Ta(˚C)
Forward voltage VF(V)
(Ta=25˚C)
500
500
200
200
40
30
20
Peak forward current IFM(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
50
100
50
20
10
5.0
100
50
20
10
5.0
10
2.0
0
-30
0
25
50
75 85
100
1.0
0.1
125
2.0
1.0
0.2
0.5
1
2
5
10
20
1/50
50
1/20
Forward current IF(mA)
Ambient temperature Ta(˚C)
1/10
1/5
1/2
1
Duty ratio DR
HD,D series
Forward Current vs. Forward Voltage(Note)
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
60
(Ta=25˚C)
1000
50
500
40
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
10
5.0
1.0
0.5
100
50
10
5.0
10
0
25
50
75 85
100
0.1
1.0
125
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-20
0
Forward voltage VF(V)
Ambient temperature Ta(˚C)
Luminous Intensity vs. Forward Current(Note)
Peak Forward Current Derating Curve
40
60
80
100
120
Duty Ratio vs. Peak Forward Current
(Ta=25˚C)
(Ta=25˚C)
1000
60
20
Ambient temperature Ta(˚C)
Characteristics
Diagrams
0
-30
500
500
200
200
40
30
20
Peak forward current IFM(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
50
100
50
20
10
5.0
100
50
20
10
5.0
10
2.0
2.0
0
-30
0
25
50
75 85
Ambient temperature Ta(˚C)
100
125
1.0
0.1
1.0
0.2
0.5
1
2
5
10
20
Forward current IF(mA)
50
1/50
1/20
1/10
1/5
1/2
1
Duty ratio DR
Note)Characteristics shown in diagrams are typical values. (not assurance value)
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
57
Characteristics Diagrams
HS,S series
Forward Current Derating Curve
Forward Current vs. Forward Voltage(Note)
60
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
50
500
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
40
20
10
5
3
2
10
0
25
50
75 85
100
0.5
1.0
125
200
100
50
20
1
0
-30
(IF=20mA)
1000
10
1.2
1.4
Ambient temperature Ta(˚C)
1.6
1.8
2.0
2.2
2.4
-20
0
Forward voltage VF(V)
60
500
50
200
40
60
80
100
Duty Ratio vs. Peak Forward Current
Luminous Intensity vs. Forward Current(Note)
Peak Forward Current Derating Curve
20
Ambient temperature Ta(˚C)
(Ta=25˚C)
(Ta=25˚C)
500
40
30
20
100
Peak forward current IF(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
300
50
20
10
5
10
0
25
50
75 85
100
1
0.1
125
50
30
10
2
0
-30
100
5
0.2
0.5
1
2
5
10
20
1/50
50
1/20
1/10
1/5
1/2
1
Duty ratio DR
Forward current IF(mA)
Ambient temperature Ta(˚C)
HY,H series
Forward Current Derating Curve
Forward Current vs. Forward Voltage(Note)
60
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
(Ta=25˚C)
1000
50
500
40
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
10
5.0
1.0
0.5
100
50
10
5.0
10
0
-30
0
25
50
75 85
100
0.1
1.0
125
1.0
1.2
1.4
Ambient temperature Ta(˚C)
1.6
1.8
2.0
2.2
2.4
2.6
-20
0
Forward voltage VF(V)
(Ta=25˚C)
1000
60
40
60
80
100
120
Duty Ratio vs. Peak Forward Current
Luminous Intensity vs. Forward Current(Note)
Peak Forward Current Derating Curve
20
Ambient temperature Ta(˚C)
(Ta=25˚C)
500
500
300
40
30
20
200
Peak forward current IF(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
50
100
50
20
10
25
50
75 85
Ambient temperature Ta(˚C)
100
125
30
10
2.0
0
50
5.0
10
0
-30
100
1.0
0.1
5
0.2
0.5
1
2
5
10
20
Forward current IF(mA)
50
1/50
1/20
1/10
1/5
1/2
1
Duty ratio DR
Note)Characteristics shown in diagrams are typical values. (not assurance value)
58
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
Characteristics Diagrams
EG,E,F series
Forward Current vs. Forward Voltage(Note)
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
60
(Ta=25˚C)
1000
50
500
40
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
10
5.0
1.0
0.5
100
50
10
5.0
10
0
-30
0
25
50
75 85
100
0.1
1.0
125
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-20
0
Forward voltage VF(V)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
40
60
80
100
120
Duty Ratio vs. Peak Forward Current
Luminous Intensity vs. Forward Current(Note)
60
20
Ambient temperature Ta(˚C)
(Ta=25˚C)
1000
(Ta=25˚C)
500
500
300
40
30
20
200
Peak forward current IF(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
50
100
50
20
10
25
50
75 85
100
1.0
0.1
125
30
10
2.0
0
50
5.0
10
0
-30
100
5
0.2
0.5
Ambient temperature Ta(˚C)
1
2
5
10
20
1/50
50
1/20
1/10
1/5
1/2
1
Duty ratio DR
Forward current IF(mA)
KG,K series
Forward Current vs. Forward Voltage(Note)
Forward Current Derating Curve
Luminous Intensity vs. Ambient Temperature(Note)
(Ta=25˚C)
100
60
(Ta=25˚C)
1000
50
500
40
30
20
Relative luminous intensity(%)
Forward current IF(mA)
Forward current IF(mA)
50
10
5.0
1.0
0.5
100
50
10
5.0
10
0
25
50
75 85
100
0.1
1.0
125
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-20
0
Forward voltage VF(V)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current(Note)
60
20
40
60
80
100
120
Ambient temperature Ta(˚C)
Duty Ratio vs. Peak Forward Current
(Ta=25˚C)
1000
(Ta=25˚C)
500
500
Characteristics
Diagrams
0
-30
300
40
30
20
200
Peak forward current IF(mA)
Relative luminous intensity(%)
Peak forward current IFM(mA)
50
100
50
20
10
25
50
75 85
Ambient temperature Ta(˚C)
100
125
30
10
2.0
0
50
5.0
10
0
-30
100
1.0
0.1
5
0.2
0.5
1
2
5
10
20
Forward current IF(mA)
50
1/50
1/20
1/10
1/5
1/2
1
Duty ratio DR
Note)Characteristics shown in diagrams are typical values. (not assurance value)
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
59
Taping Specifications
(Unit : mm)
4.0
0.2
4.0
0.2
1.5
1.2
4.0
GM1❏❏35200A❏ series
GM1❏❏55200A❏ series
LT1❏❏67A series
LT1❏97A series
2.0
Cathode
4.0
GM1❏❏40300AE series/LT1❏❏40A series 4 000 pcs. /reel
6 000 pcs. /reel
5 000 pcs. /reel
4 000 pcs. /reel
5 000 pcs. /reel
1.55
0.3
4.0
4.0
0.25
5.5
2.3
0.1
2.0
Cathode
1.5
1.75
0.1
1.2
1.55
5.5
1.9
1.0
3.5
8.0
3.5
8.0
1.75
1.75
1.5
3.2
1.75
Cathode
0.1
1.9
Cathode
3.8
0.1
2.0
4.0
GM5❏❏95200A❏ series/LT1Z❏95A series 2 000 pcs. /reel
LT1❏90A series 3 000 pcs. / reel
1.55
8.0
2.0
Anode
4.0
2.3
4.0
2.0
6.1
1.75
0.3
5.5
3.5
8.0
5.5
3.9
yy
;;
3.5
2.9
0.2
4.0
1.5
0.1
8.0
Anode
0.1
1.5
Cathode
Taping Specifications
5.5
3.0
12.0
3.5
8.0
1.6
9.2
6.4
5.65
1.75
Cathode
2.0
4.0
3.1
GM5❏❏01200A series/GM5WA02200A/GM5WA06210A/
GM5WA06250A 800 pcs. / reel
Notice
Internet
LT1❏❏45A series/GM4❏C13300AC series 3 000 pcs. /reel
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
67
Taping Specifications
(Unit : mm)
yy;
;;
y
4.0
1.5
1.75
0.25
4.0
1.5
1.75
0.2
1.9
2.0
Cathode
4.0
8.0
3.5
4.0
LT1❏❏90A series 3 000 pcs. / reel
4.0
1.33
0.1
1.25
8.0
5.5
1.85
3.5
1.75
1.5
0.2
2.0
Cathode
LT1❏❏67A series/GM1WA80350A/GM1ZUB 80300A/GM1ZSG80300A
4 000 pcs. /reel
5.5
5.5
1.9
0.1
0.1
1.2
3.4
3.5
8.0
3.3
1.9
2
Cathode
4.0
GM4❏❏81200A❏ series 4 000 pcs. /reel
4.5
■ Shape and dimension of reel
ø60
ø178
ø13
0.2
0.8
0.6
0.4
0.2
0.8
0.6
0.4
2.0
Label
1.5
10
68
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
Taping Specifications
■Lead type Chip LED (Unit : mm)
9.4
4.7
8.2
325±2
3.7
Sleave
1 Pin mark
Stopper
(without guard)
1 Pin mark of the product is stopper (without guard) side.
Stopper
(with guard)
Taping Specifications
GM5❏❏03200Z series/GM5WA06200Z/GM5WA06250Z 1 000 pcs. (50 pcs./sleeve × 20)
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://sharp-world.com/ecg/
69
NOTICE
¡The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
¡Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reser ves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
¡Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher reliability
such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
¡If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such
SHARP devices.
¡This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in par t, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
¡Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
72
