LT5014S

Dot Matrix LED s General Description Sharp's dot matrix LEDs can express characters and symbols on a display. (Number of dots: 5!7, 8!8, 16!16). We can supply wide color variation; high-luminosity red T series, yellow-green E series, sunset orange S series, dichromatic emission, etc. LT5038T LT5017ED LT5040ET LT5016ED s Dot Matrix LED Number of dots Common pins Radiation color Outline dimensions T Red (High-luminosity) D Red S Sunset orange E Yellow-green E T E D Page Figure 1 LT5017ED LT5027ED LT5010D LT5105D LT5106D LT5008D LT5014D LT5005D LT5014S LT5005S LT5106S LT5105E LT5106E LT5008E LT5014E LT5040ET LT5005E LT5050ET LT5016ED LT5026ED → LT5007ED LT5008ED → → 2 3 4 5 5/6 7 8 9 10 11 12 Red Yellow-green+ (High-luminosity) Yellow+ Red green Outline dimensions (mm) 12.7!17.8 K LT5038T A LT5037T K 20!20 K A LT5010T 8!8 30.2!30.2 K A K 31.8!31.8 A K LT5013T 31.9!31.9 A A K 16!16 A 40!40 LT5005T A A 64!64 A 96!96 *1 Common pins show row.(Column row) 5!7 catalogs, data books, etc. Contact SHARP 152 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP *1 Dot Matrix LED s Absolute Maximum Ratings Figures shown below are values per dot. (Ta=25˚C) Derating factor (mA/˚C) Pulse 1.45 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45/1.45 1.45 1.45 Reverse voltage VR (V) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5/5 5 5 Operating temperature Storage temperature Topr. Tstg. (˚C) (˚C) -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +70 -20 to +60 -20 to +80 -20 to +70 -20 to +80 -20 to +70 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 -20 to +60 -20 to +80 Forward current Peak forward current Outline Model No. Number Radiation color dimensions IF IFM of dots (mm) (mA) Anode common*1 Cathode common*1 (mA) 50*2 15 5!7 12.7!17.8 Red(High-luminosity) LT5037T LT5038T LT5017ED 15 50*2 20!20 Yellow-green/Red Yellow-green/Red LT5027ED 15 50*2 15 50*2 Red(High-luminosity) LT5010T LT5010D Red 15 50*2 LT5106D LT5105D 30.2!30.2 Red 20 50*2 8!8 LT5106S Sunset orange 20 50*2 LT5106E LT5105E 20 50*2 Yellow-green LT5008ED LT5007ED Yellow-green/Red 15 50*2 31.8!31.8 Red LT5008D 15 50*2 LT5008E Yellow-green 15 50*2 LT5013T 15 80*3 Red(High-luminosity) LT5014D Red 15 80*3 31.9!31.9 LT5014S 15 80*3 Sunset orange LT5014E Yellow-green 15 80*3 31.7!31.7 Yellow-green/Red(High-luminosity) LT5040ET 15 50*2 Red(High-luminosity) LT5005T 15 80*3 16!16 LT5005D 15 80*3 Red LT5005S 40!40 Sunset orange 15 80*3 LT5005E 15 80*3 Yellow-green Yellow-green/Red(High-luminosity) LT5050ET 15/15 50/50*3 64!64 Yellow-green/Red LT5016ED 15 80*3 96!96 Yellow-green/Red LT5026ED 15 80*3 *1 Common pins show row.(Column row) *2 Duty ratio=1/10, Pulse width=0.1ms *3 Duty ratio=1/16, pulse width=0.1ms s Electro-optical Characteristics Number of dots Figures shown below are values per dot. *2 *3 (Ta=25˚C) VR (V) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 4 4 4 4 3 4 4 Forward voltage Outline Luminous intensity Peak emission wavelength Spectrum radiation bandwidth Reverse current Model No. VF(V) Radiation color dimensions ∆λ(nm) IR(µA) IV (mcd) λp (nm) IF 1 1 (mm) Anode common* Cathode common* TYP. MAX. TYP. TYP. TYP. (mA) MAX. 1.85 3.0 (4.5) 660 20 50 100 5!7 12.7!17.8 Red(High-luminosity) LT5037T LT5038T * LT5017ED 2.4/2.2 3.0 1.9/1.6 565/635 10 30/35 50 20!20 Yellow-green/Red* 3.0 2.5/2.0 565/635 10 30/35 50 Yellow-green/Red LT5027ED 2.4/2.2 2.3 2.2 660 10 20 50 1.85 Red(High-luminosity) LT5010T 2.7 1.11 635 10 35 LT5010D 50 Red 2.2 2.7 1.11 635 10 35 LT5106D LT5105D 10 30.2!30.2 Red 2.2 8!8 2.7 1.11 610 10 35 LT5106S 10 Sunset orange 2.2 2.7 1.69 565 10 30 LT5106E LT5105E 10 2.4 Yellow-green * 2.08/1.56 565/635 10 30/35 LT5008ED LT5007ED 2.4/2.2 3.0/2.7 50 Yellow-green/Red 31.8!31.8 Red 2.03 635 10 35 LT5008D 50 3.0 2.2 2.7 565 10 30 LT5008E 50 3.0 Yellow-green 2.4 LT5013T 1.35 660 10 20 50 3.0 1.85 Red(High-luminosity) 1.3 635 10 50 LT5014D 35 3.0 Red 2.2 31.9!31.9 1.11 610 10 35 LT5014S 50 3.0 2.2 Sunset orange 1.7 565 10 30 LT5014E 50 3.0 Yellow-green 2.4 1.45/1.70 565/660 100 30/20 50 3.0 31.7!31.7 Yellow-green/Red(High-luminosity) * LT5040ET 2.4/1.85 1.78 660 10 20 50 3.0 Red(High-luminosity) LT5005T 1.85 16!16 LT5005D 1.04 635 10 35 50 2.7 2.2 Red LT5005S 40!40 Sunset orange 1.11 610 10 35 50 2.7 2.2 LT5005E 1.3 565 10 30 50 3.0 2.4 Yellow-green (1.9)/(3.0) 565/660 100 30/20 10 2.4/1.85 Yellow-green/Red(High-luminosity) * LT5050ET 3.0 LT5016ED 64!64 Yellow-green/Red * 565/635 10 30/35 50 3.0 5.2/3.9 2.4/2.2 7.15/5.85 96!96 Yellow-green/Red * 565/635 10 30/35 50 3.0 LT5026ED 2.4/2.2 * Each figure shown in the table is yellow-green/red. *1 Common pins show row.(Column row) *2 IFM=50mA *3 IF=10mA ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 153 Dot Matrix LED 1 12.7 ±0.3 P2.54!4=10.16 Outline Dimensions(Unit:mm) 20.0+0 -0.4 P2.5!7=17.5 Column 1 8 20.0+0 -0.4 P2.5!7=17.5 Row 8 1 2 P I N 12 0.4 MAX. Calking 17.78 ±0.4 P2.54!6=15.24 P2.54!5=12.7 P I N 1 2.0 64-ø 1.8 1.0 3.0 6 7 35-ø 2.0 Internal connection diagram LT5037T 1 3 10 7 8 24-ø 0.45 P2.0!7=14.0 1.0 12 11 7.5 7.5 5.0 5.0 4.6 1 8 2.0 6.6 12-ø 0.45 +0.15 -0 7.62 LT5038T 1 3 10 7 8 2 9 4 5 6 9 16 17 24 7.5 I Do t 7.5 Internal connection diagram 6.0+1.0 -0.5 4-ø4.0 MAX. Calking 9 Row 1 10 Row 2 11 Row 3 12 Row 4 12 11 2 9 4 Column 1 Column 2 Column 3 Column 4 Column 5 Column 6 Column 7 Column 8 1 17 2 18 3 19 4 20 21 5 22 6 23 7 24 8 13 Row 5 14 Row 6 15 Row 7 16 Row 8 5 6 Red Yellow-green LT5037T/LT5038T LT5017ED 3 P2.5!7=17.5 4 30.2 PIN.18 0.4MAX Calking B 30.2±0.2 5 ±0.2 2.7 2.7 4-C0.4 (For all 64 pcs.) 10 64-t1.9 1 1 +0 -0.4 20 +0 -0.4 Row1 Column 8 3.81!7=26.67 20 Row 8 Row8 P2.5!7=17.5 PIN.1 9 Column1 Column8 3.81!7=26.67 Dot shows PIN1 1 6 8.0 1.0 5 22.86 18 2 17 15 6 8 11 9 I Do t 9 10 11 12 13 4.5 24-ø0.45 P2.0!7=14 Internal connection diagram Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 16-ø0.45 0.05 2.54!8=20.32 LT5105t Series Internal connection diagram 12 10 13 14 5 4 1 3 7.5 1 9 17 8 16 Column 1 Column 2 Column 3 Column 4 Column 5 Column 6 Column 7 Column 8 14 15 16 1.95 LT5010t Series/LT5106t Series Internal connection diagram 18 2 17 15 6 12 10 13 14 5 4 1 3 8 11 9 7.5 24 1 17 2 18 3 19 4 20 21 5 22 6 23 7 24 8 7.5 7.5 4-ø4.0MAX Calking Red Yellow-green LT5027ED (Notice) LT5010t Series LT5105t Series/LT5106t Series catalogs, data books, etc. Contact SHARP 154 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP 0.05 3 1.95 Dot Matrix LED 5 31.8±0.2 4.0!7=28.0 Outline Dimensions(Unit:mm) ±0.2 6 3.0 1.0 31.8 4.0!7=28.0 3.0 1.0 4.0!7=28.0 4.0!7=28.0 31.8±0.2 31.8±0.2 16.0 64-ø 3.0 64 -ø 3.0 Direction of Pin1 2.0 - 2.0 6.0 LT5007ED 6.0 Direction of Pin1 LT5008D 2.54!11=27.94 .5 24-ø0.55 8.0 16-ø0.55 2.54!7=17.78 4- ø1 1 14 Internal connection diagram 11 Row 1 12 13 24.0 8.0 4- . ø1 5 1 8 24.0 9 Row 2 12 Row 3 13 Row 4 5 Row 5 4 Row 6 1 Row 7 3 Row 8 24.0 Internal connection diagram LT5007ED 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 13 14 15 16 4 3 2 1 Red Yellow-green LT5008ED : 1 dot 16 9 24 23 22 21 20 19 18 17 6 5 8 7 10 9 12 11 13 14 15 16 4 3 2 1 24.0 16 COLUMN1 2 COLUMN2 15 COLUMN3 14 COLUMN4 6 COLUMN5 7 COLUMN6 10 COLUMN7 8 COLUMN8 LT5008t Series LT5007ED/LT5008ED 31.9±0.2 7.5 1.95 2.0 256-ø1.4 7 1.95 1.95 8 31.7±0.3 P2.0!15=30.0 2.0!13=26.0 2.0 31.7±0.3 P2.0!15=30.0 2.0!13=26.0 31.9±0.2 10.0 10.0 1.95 265-ø 1.6 Cover case Internal connection diagram LT5013T 2.5 2.0 6.0 3.8 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 Row1 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 Green Red 1.0 2.0!7=14.0 1.0 48-ø 0.45 P2.0!14=28.0 Internal connection diagram 48 37 42 41 43 25 31 32 33 34 35 26 36 2.0 1 2 6 7 11 12 30 29 40 47 1 8 14.0 39 (24.0) 14.0 10.0 10.0 9 16 46 13 14 18 19 23 24 38 45 27 44 28 7 6 8.0 12.0 12.0 Row16 LT5014t 8.0 10.0 Column1 Column16 24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8 Row1 30 18 32 28 20 26 22 25 9 6 10 4 12 16 2 14 16.0 35 36 32 24 25 17 25 26 30 31 4- ø 1.0 Spacer 4-ø 4.0 MAX. Calking 13 23 14 15 16 17 18 24 14.0 5 4 3 21 20 9 8 22 19 11 1 10 2 12 4-ø 3.0 2.0 2.0 37 47 48 (24.0) Row16 LT5013T/LT5014t Series (Notice) LT5040ET ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) 155 Dot Matrix LED 9 2.4 Row1 Pin25 Outline Dimensions(Unit:mm) 40.0MAX Column 1 Pin 24 1 2.5!13=32.5 40.0MAX 2.5!7=17.5 32 16 39.8MAX 16 1 Column 256- ø2.0 16 1.5 6.0 Pin1mark Row16 Pin9 Pin1 P*2.5!7=*17.5 (*10.0) 2.4 2.4 2.4 0.5MAX (15.0) 1.0t 5.7 3.0 Column1 Column16 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 Row1 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 (12.5) * 47 48 31 33 34 4.95 32 L T 5 0 05 D 2.0 2.5!7=17.5 32-ø0.5 4-ø4.0MAX 12.5 7.5 9 16 9 4-ø1.2 (*10.0) P*2.5!7=*17.5 (15.0) (15.0) Internal connection diagram 30.0 15.0 15.0 10.0 10.0 32 10.0 16 10.0 10.0 Pin1 8 10.0 (*12.5) P*2.5!7=*17.5 *4.95 Calking (*12.5) 17 18 (*17.45) (*17.45) Internal connection diagram LT5005T 1 8 (15.0) (10.0) 2.5!13=32.5 8 256-ø1.8 P*2.5!7=*17.5 (* 10.0) 48- ø 0.45 Row ±0.15 17 39.9 ±0.2 2.45 P2.5!13=32.5 2.45 Column 16 10 39.9 ±0.2 2.45 P2.5!13=32.5 2.45 1.8 1.0 4-ø1.1 17 16 15 14 1 2 3 4 5 6 7 Row16 24 LT5005D/S/E Column1 Column16 1 2 3 4 5 6 7 8 24 23 22 21 20 19 18 17 Row1 25 26 27 28 29 30 31 32 16 15 14 13 12 11 10 9 13 12 11 10 9 8 7 6 5 4 3 2 1 25 7.5 Row 1 8 9 10 11 12 13 14 15 16 15.0 30.0 15.0 Green Red 48 32 47 31 46 30 45 29 44 28 43 27 42 26 41 25 40 24 39 23 38 22 37 21 36 20 35 19 34 18 33 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Row16 Column LT5005t Series LT5050ET 256-ø3.0 11.1 Row1 20.7 48-t0.5 11 64.0MAX P4.0!15=60.0 12 96.0MAX P6.0!15=90.0 Row1 P6.0!15=90.0 4.0!15=60.0 Row16 Column 1 Column 16 7.1 4.0!15=60.0 36.0 32 31 16 1 48 16 48 16 Row1 33 15 33 17 32 256-ø5.0 11.1 20.7 48-0.5 64.0MAX P4.0!15=60.0 96.0MAX Row16 Column 1 Column 16 6.7 Screw head 1.5 4.0 48.0 4.0!7=28.0 16.0 4.0 9.7 1 47 4.0!7=28.0 16.0 48 8 31 32 16.0 4.0!7=28.0 56 Internal connection diagram 18 17 2 17 33 34 9 16 18 Screw head 5-ø3.5 17 Internal connection diagram 18 33 34 31 32 47 20.0 4.0!7=28.0 Row1 84.0 Row16 1 dot Column16 48 Column1 Red Yellow-green Row16 1 dot Column1 1 Column16 Red Yellow-green LT5016ED (Notice) LT5026ED catalogs, data books, etc. Contact SHARP 156 (Internet) ¡devices shown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. Data for sharp's internet.(Address http://www.sharp.co.jp/ecg/) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP