LT9526D

LED Large Lamp LT9526t series LT9526t series s Outline Dimensions 23.8±0.5 3.5±0.5 12 1110 9 8 7 R1.0 15.24 ø20mm, Dome Type, Colored Diffusion, High-luminosity, Large LED Lamps for Indoor Use (Unit : mm) 5.0 0.25 12 3 456 ø23.0 ø20.0 ±0.5 Colored diffusion Pin connections 2 4 6 8 10 12 1.0 1 0.5 2.54!5=12.7 3 5 7 9 11 s Absolute Maximum Ratings Model No. Radiation color Radiation material Power dissipation Forward current Peak forward current P*1 IF*2 IFM*2*3 (mW) (mA) (mA) (Ta=25˚C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/˚C)*2 VR*2 Topr Tstg Tsol*4 (V) (˚C) (˚C) (˚C) DC Pulse 1.09 1.09 1.09 1.82 1.82 1.82 5 5 5 -25 to +70 -25 to +70 -25 to +70 -30 to +80 -30 to +80 -30 to +80 260 260 260 100 60 1 010 LT9526D Red GaAsP on GaP 100 60 1 010 LT9526H Yellow GaAsP on GaP 100 60 1 010 LT9526E Yellow-green GaP *1 Per chip *2 Per lamp(6 chips/lamp) *3 Duty ratio=1/10, Pulse width=0.1ms *4 5s(At the position of 1.6mm or more from the bottom face of resin package) s Electro-optical Characteristics*5 Lens type Model No. Forward voltage VF(V) TYP 2.0 2.0 2.2 MAX 2.8 2.8 2.8 Peak emission wavelength IF λp(nm) (mA) TYP 635 40 585 40 565 40 Luminous intensity IF IV(mcd) (mA) TYP 40 250 40 250 40 250 Spectrum radiation bandwidth IF ∆λ(nm) (mA) TYP 35 40 35 40 30 40 Reverse current VR IR(µA) (V) MAX 10 4 10 4 10 4 Terminal capacitance Ct(pF) TYP 30 30 30 (Ta=25˚C) Page for characteristics (MHZ) diagrams → 1 → 1 → 1 LT9526D Colored LT9526H diffusion LT9526E *5 Per chip *6 Luminous intensity per lamp at IF=40mA/chip(6 chips/lamp) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 91 LED Lamp PR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) HD series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) catalogs, data books, etc. Contact SHARP order to obtain 118 (Internet) ¡ devices shown inoptoelectronic/power device is provided for innternet.(Addressthe latest device specification sheets before using any SHARP device. Data for sharp's i http://www.sharp.co.jp/ecg/) (Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp HS series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (IF=20mA) 50 Forward current IF(mA) 40 Forward current IF(mA) 20 10 5 3 2 200 30 100 50 20 10 1 0 -25 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(˚C) 0 25 50 75 85 100 125 Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current 500 300 (Ta=25˚C) 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 100 50 40 100 50 30 30 20 10 5 20 10 2 0 -25 0 25 50 75 85 100 125 1 0.1 0.2 0.5 1 2 5 10 20 50 10 5 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Ambient temperature Ta(˚C) Note)Characteristics shown in diagrams are typical values. (not assurance value) HY series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before usin g any SHARP device. (Internet) ¡ Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 119 LED Lamp EG series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) KG series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25˚C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25˚C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(˚C) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 100 50 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(˚C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) catalogs, data books, etc. Contact SHARP order to obtain 120 (Internet) ¡ devices shown inoptoelectronic/power device is provided for innternet.(Addressthe latest device specification sheets before using any SHARP device. Data for sharp's i http://www.sharp.co.jp/ecg/) (Notice) ¡ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP