PC703VxNSZX Series/PC703VxYSZX Series
PC703VxNSZX Series/
PC703VxYSZX Series
High Collector-emitter Voltage
Type Photocoupler
■ Features
■ Outline Dimensions
Internal connection
diagram
6
Anode
mark
Rank mark
■ Applications
4
1
2
3
0.6±0.2
1.2±0.3
DIP
0.5
±0.1
5
4
1
2
3
2.54±0.25
0.5
TYP.
3.25±0.5 3.5±0.5
Package
2.9±0.5
*
6
7.62±0.3
7.12±0.3
■ Model Line-up
Safty Standard Approval
UL
TÜV(VDE0884)
−
PC703VxNSZX Series
PC703VxYSZX Series
5
PC703V
1. Home appliances
2. Programmable controllers
3. Peripheral equipment of personal computers
Model No.
(Unit : mm)
6.5±0.3
1. TTL compatible output
2. High collector-emitter voltage (VCEO:70V)
3. Isolation voltage (Viso (rms):5kV)
4. Recognized by UL, file No.E64380
Approved by TÜV (VDE0884)(PC703VxYSZX Series)
5. 6-pin DIP package
0.26±0.1
θ
θ=0 to 13˚
θ
* Application Model No. PC703V
■ Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol
Rating
50
Forward current
IF
*1
Peak forward current
IFM
1
Input
Reverse voltage
VR
6
Power dissipation
P
70
Collector-emitter voltage VCEO
70
Emitter-collector voltage VECO
6
Collector-base voltage VCBO
70
Output
Emitter-base voltage VEBO
6
IC
50
Collector current
PC
160
Collector power dissipation
200
Total power dissipation
Ptot
*2
Isolation voltage Viso (rms)
5
Operating temperature
−30 to +100
Topr
−55 to +125
Tstg
Storage temperature
*3
260
Soldering temperature Tsol
Unit
mA
A
V
mW
V
V
V
V
mA
mW
mW
kV
°C
°C
°C
*1 Pulse width≤100µs, Duty ratio=0.001
*2 40 to 60%RH, AC for 1 min
*3 For 10 s
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
PC703VxNSZX Series/PC703VxYSZX Series
■ Electro-optical Characteristics
Input
Output
Symbol
VF
VFM
IR
Ct
ICEO
IC
Parameter
Forward voltage
Peak forward voltage
Reverse current
Terminal capacitance
Collector dark current
*4
Collector cullent
Collector-emitter saturation voltage
Isolation resistance
Floating capacitance
Cut-off frequency
Rise time
Response time
Fall time
Transfer
characteristics
VCE(sat)
RISO
Cf
fC
tr
tf
MIN.
−
−
−
−
−
4.0
−
Conditions
IF=20mA
IFM=0.5A
VR=4V
V=0, f=1kHz
VCE=20V, IF=0
IF=10mA, VCE=5V
IF=20mA, IC=1mA
5×1010
DC500V, 40 to 60%RH
V=0, f=1MHz
−
−
VCE=5V, IC=2mA, RL=100Ω, −3dB
−
VCE=2V, IC=2mA
RL=100Ω
−
TYP.
1.2
−
−
30
−
−
0.1
1011
0.6
80
4
3
MAX.
1.4
3.0
10
250
10−7
32.0
0.2
−
1.0
−
15
15
(Ta=25˚C)
Unit
V
V
µA
pF
A
mA
V
Ω
pF
kHz
µs
µs
*4 Classification table of collector current is shown below.
Model No. *5
PC703V1NSZX
PC703V2NSZX
PC703V3NSZX
PC703V4NSZX
PC703V5NSZX
PC703V6NSZX
PC703V7NSZX
PC703V0NSZX
Rank mark
A
B
C
D
A or B
B or C
C or D
A, B, C or D
IC (mA)
4.0 to 8.0
6.3 to 12.5
10.0 to 20.0
16.0 to 32.0
4.0 to 12.5
6.3 to 20.0
10.0 to 32.0
4.0 to 32.0
Measuring Conditions
IF=10mA
VCE=5V
Ta=25°C
*5 PC703V0YSZX Series are equivalent.
Fig.1 Forward Current vs. Ambient
Temperature
Fig.2 Collector Power Dissipation vs.
Ambient Temperature
60
Collector power dissipation PC (mW)
200
Forward current IF (mA)
50
40
30
20
10
0
−30
0
25
50
75
Ambient temperature Ta (˚C)
100
125
160
150
100
50
0
−30
0
25
50
75
Ambient temperature Ta (˚C)
100
125
PC703VxNSZX Series/PC703VxYSZX Series
Fig.3 Peak Forward Current vs. Duty Ratio
Fig.4 Forward Current vs. Forward Voltage
10 000
2 000
1 000
500
200
100
50
25˚C
0˚C
50
−25˚C
20
10
5
2
10
1
5 10−3 2
5 10−2 2
5 10−1 2
5
50˚C
100
20
5
Ta=75˚C
200
Forward current IF (mA)
Peak forward current IFM (mA)
500
Pulse width≤100µs
Ta=25˚C
5 000
0
1
0.5
1
Duty ratio
Fig.5 Current Transfer Ratio vs. Forward
Current
2.5
45
VCE=5V
Ta=25˚C
180
160
140
120
RBE=∞
100
80
500kΩ
60
100kΩ
20mA
PC (MAX.)
25
20
10mA
15
20
5
0
0
5
10
20
IF=30mA
30
10
2
5mA
2mA
0
50
2
4
6
8
10
Collector-emitter voltage VCE (V)
Forward current IF (mA)
Fig.7 Relative Current Transfer Ratio vs.
Ambient Temperature
Fig.8 Collector - emitter Saturation Voltage
vs. Ambient Temperature
0.14
Collector-emitter saturation voltage VCE(sat) (V)
150
IF=10mA
VCE=5V
RBE=∞
100
50
0
−30
3.5
35
40
1
3
RBE=∞
Ta=25˚C
40
Collector current IC (mA)
Current transfer ratio CTR (%)
2
Fig.6 Collector Current vs. Collector-emitter
Voltage
200
Relative current transfer ratio (%)
1.5
Forward voltage VF (V)
0
25
50
75
Ambient temperature Ta (˚C)
100
IF=20mA
0.12 IC=1mA
RBE=∞
0.1
0.08
0.06
0.04
0.02
−30
0
20
40
60
Ambient temperature Ta (˚C)
80
100
PC703VxNSZX Series/PC703VxYSZX Series
Fig.9 Collector Dark Current vs. Ambient
Temperature
10−6
Collector-emitter saturation voltage VCE(sat) (V)
Collector dark current ICEO (A)
6
VCE=20V
RBE=∞
10−7
10−8
10−9
10
−10
10−11
10−12
10−13
−30
Fig.10 Collector-emitter Saturation Voltage
vs. Forward Current
0
20
40
60
80
RBE=∞
Ta=25˚C
5
IC=0.5mA
1mA
4
2mA
3mA
3
5mA
2
1
0
100
0
2.5
Ambient temperature Ta (˚C)
5
7.5
10
12.5
Forward current IF (mA)
Fig.11 Response Time vs. Load Resistance
Fig.12 Test Circuit for Response Time
100
VCE=2V
IC=2mA
RBE=∞
Ta=25˚C
50
Response time (µs)
20
Input
VCC
10
Output
5
Input
tr
td
RD
2
RL
10%
Output
tf
90%
td
1
ts
tr
ts
tf
0.5
0.2
0.1
0.01
0.1
1
10
Load resistance RL (kΩ)
Fig.13 Frequency Response
VCE=5V
IC=2mA
RBE=∞
Ta=25˚C
0
Voltage gain Av (dB)
Fig.14 Test Circuit for Frequency Response
VCC
−2
RD
−4
RL
Output
RL=1KΩ
10Ω
−6
100Ω
−8
−10
1
2
5
10
20
50
100 200
Frequency f (kHz)
500 1 000
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115
PC703VxNIZX Series
PC703VxNIZX
Series
High Collector-emitter Voltage
Type Photocoupler
■ Features
■ Outline Dimensions
1. TTL compatible output
2. High collector-emitter voltage (VCEO:70V)
3. Isolation voltage (Viso (rms):5kV)
4. Recognized by UL, file No.E64380
5. 6-pin DIP package (Lead forming type)
Internal connection
diagram
PC703V
■ Applications
1. Home appliances
2. Programmable controllers
3. Peripheral equipment of personal computers
6
5
4
1
2
3
6.5±0.3
2.54±0.25
Anode
mark
Rank mark
1
0.6±0.2
1.2±0.3
7.62±0.3
7.12±0.3
1.0+0.4
−0
0.35±0.25
Unit
mA
A
V
mW
V
V
V
V
mA
mW
mW
3
0.26±0.1
(Ta=25°C)
Parameter
Symbol
Rating
50
Forward current
IF
*1
Peak forward current
IFM
1
Input
Reverse voltage
VR
6
Power dissipation
P
70
Collector-emitter voltage VCEO
70
Emitter-collector voltage VECO
6
Collector-base voltage VCBO
70
Output
Emitter-base voltage VEBO
6
IC
50
Collector current
PC
160
Collector power dissipation
200
Total power dissipation
Ptot
*2
Isolation voltage Viso (rms)
5
Operating temperature
−30 to +100
Topr
−55 to +125
Tstg
Storage temperature
*3
260
Soldering temperature Tsol
2
3.5±0.5
■ Absolute Maximum Ratings
(Unit : mm)
1
Anode
4
Emitter
2
Cathode
5
Collector
3
NC
6
Base
+0.4
1.0−0
+0
10−0.5
kV
°C
°C
°C
*1 Pulse width≤100µs, Duty ratio=0.001
*2 40 to 60%RH, AC for 1 min
*3 For 10 s
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
PC703VxNIZX Series
■ Electro-optical Characteristics
Input
Output
Symbol
VF
VFM
IR
Ct
ICEO
IC
Parameter
Forward voltage
Peak forward voltage
Reverse current
Terminal capacitance
Collector dark current
*4
Collector cullent
Collector-emitter saturation voltage
Isolation resistance
Floating capacitance
Cut-off frequency
Rise time
Response time
Fall time
Transfer
characteristics
VCE(sat)
RISO
Cf
fC
tr
tf
MIN.
−
−
−
−
−
4.0
−
Conditions
IF=20mA
IFM=0.5A
VR=4V
V=0, f=1kHz
VCE=20V, IF=0
IF=10mA, VCE=5V
IF=20mA, IC=1mA
5×1010
DC500V, 40 to 60%RH
V=0, f=1MHz
−
−
VCE=5V, IC=2mA, RL=100Ω, −3dB
−
VCE=2V, IC=2mA
RL=100Ω
−
TYP.
1.2
−
−
30
−
−
0.1
1011
0.6
80
4
3
MAX.
1.4
3.0
10
250
10−7
32.0
0.2
−
1.0
−
15
15
(Ta=25˚C)
Unit
V
V
µA
pF
A
mA
V
Ω
pF
kHz
µs
µs
*4 Classification table of collector current is shown below.
Model No.
PC703V1NIZX
PC703V2NIZX
PC703V3NIZX
PC703V4NIZX
PC703V5NIZX
PC703V6NIZX
PC703V7NIZX
PC703V0NIZX
Rank mark
A
B
C
D
A or B
B or C
C or D
A, B, C or D
IC (mA)
4.0 to 8.0
6.3 to 12.5
10.0 to 20.0
16.0 to 32.0
4.0 to 12.5
6.3 to 20.0
10.0 to 32.0
4.0 to 32.0
Measuring Conditions
IF=10mA
VCE=5V
Ta=25°C
Fig.1 Forward Current vs. Ambient
Temperature
Fig.2 Collector Power Dissipation vs.
Ambient Temperature
60
Collector power dissipation PC (mW)
200
Forward current IF (mA)
50
40
30
20
10
0
−30
0
25
50
75
Ambient temperature Ta (˚C)
100
125
160
150
100
50
0
−30
0
25
50
75
Ambient temperature Ta (˚C)
100
125
PC703VxNIZX Series
Fig.3 Peak Forward Current vs. Duty Ratio
Fig.4 Forward Current vs. Forward Voltage
10 000
2 000
1 000
500
200
100
50
25˚C
0˚C
50
−25˚C
20
10
5
2
10
1
5 10−3 2
5 10−2 2
5 10−1 2
5
50˚C
100
20
5
Ta=75˚C
200
Forward current IF (mA)
Peak forward current IFM (mA)
500
Pulse width≤100µs
Ta=25˚C
5 000
0
1
0.5
1
Duty ratio
Fig.5 Current Transfer Ratio vs. Forward
Current
2.5
45
VCE=5V
Ta=25˚C
180
160
140
120
RBE=∞
100
80
500kΩ
60
100kΩ
20mA
PC (MAX.)
25
20
10mA
15
20
5
0
0
5
10
20
IF=30mA
30
10
2
5mA
2mA
0
50
2
4
6
8
10
Collector-emitter voltage VCE (V)
Forward current IF (mA)
Fig.7 Relative Current Transfer Ratio vs.
Ambient Temperature
Fig.8 Collector - emitter Saturation Voltage
vs. Ambient Temperature
0.14
Collector-emitter saturation voltage VCE(sat) (V)
150
IF=10mA
VCE=5V
RBE=∞
100
50
0
−30
3.5
35
40
1
3
RBE=∞
Ta=25˚C
40
Collector current IC (mA)
Current transfer ratio CTR (%)
2
Fig.6 Collector Current vs. Collector-emitter
Voltage
200
Relative current transfer ratio (%)
1.5
Forward voltage VF (V)
0
25
50
75
Ambient temperature Ta (˚C)
100
IF=20mA
0.12 IC=1mA
RBE=∞
0.1
0.08
0.06
0.04
0.02
−30
0
20
40
60
Ambient temperature Ta (˚C)
80
100
PC703VxNIZX Series
Fig.9 Collector Dark Current vs. Ambient
Temperature
10−6
Collector-emitter saturation voltage VCE(sat) (V)
Collector dark current ICEO (A)
6
VCE=20V
RBE=∞
10−7
10−8
10−9
10
−10
10−11
10−12
10−13
−30
Fig.10 Collector-emitter Saturation Voltage
vs. Forward Current
0
20
40
60
80
RBE=∞
Ta=25˚C
5
IC=0.5mA
1mA
4
2mA
3mA
3
5mA
2
1
0
100
0
2.5
Ambient temperature Ta (˚C)
5
7.5
10
12.5
Forward current IF (mA)
Fig.11 Response Time vs. Load Resistance
Fig.12 Test Circuit for Response Time
100
VCE=2V
IC=2mA
RBE=∞
Ta=25˚C
50
Response time (µs)
20
Input
VCC
10
Output
5
Input
tr
td
RD
2
RL
10%
Output
tf
90%
td
1
ts
tr
ts
tf
0.5
0.2
0.1
0.01
0.1
1
10
Load resistance RL (kΩ)
Fig.13 Frequency Response
VCE=5V
IC=2mA
RBE=∞
Ta=25˚C
0
Voltage gain Av (dB)
Fig.14 Test Circuit for Frequency Response
VCC
−2
RD
−4
RL
Output
RL=1KΩ
10Ω
−6
100Ω
−8
−10
1
2
5
10
20
50
100 200
Frequency f (kHz)
500 1 000
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115