PC931

PC930 Series PC930 Series s Features 1. High sensitivity ( IFLH , I FHL : MAX. 1mA ) 2. TTL and LSTTL compatible output 3. Operating supply voltage range ( VCC : 4.5 to 15V, PC930/PC931/PC932/PC933 ) 4. Various output forms ( Open collector output, pull-up resistor built-in type, totem pole output ) 5. Low output current dissipation ( ICCL : MAX. 3.8mA ) 6. High isolation voltage between input and output ( Viso : 5 000V rms ) 7. Recognized by UL, file No. E64380 Digital Output, High Sensitivity Type OPIC Photocoupler s Outline Dimensions 6 6.5 ± 0.5 5 4 ( Unit : mm ) Model No. 1 2 3 0.9 ± 0.2 1.2 ±0.3 7.62 ± 0.3 Anode mark 7.12 ± 0.5 0.5 TYP 3.5 ± 0.5 3.7 ± 0.5 3.35 ± 0.5 0.5 ± 0.1 2.54 ± 0.25 θ 0.26 ± 0.1 θ = 0 to 13 ˚ θ s Model Line-up Open collector output type Pull-up resistor built-in type Totem pole output type Low active High active PC930 PC931 PC932 PC933 PC934 PC935 Internal connection diagram PC930/PC931 PC932/PC933 6 5 4 6 5 4 s Applications 1. Computer terminals 2. High speed line receivers 3. Interfaces with various data transmission equipment 1 2 3 Amp 1 2 3 Amp PC934/PC935 6 5 4 •••••• 1 Anode 2 Cathode 3 NC Voltage regulator 4 VO 5 GND 6 V CC s Absolute Maximum Ratings Parameter Symbol Forward current IF *1 Peak forward current I FM Input Reverse voltage VR Power dissipation P PC930/PC931 Supply voltage PC932/PC933 V CC PC934/PC935 Output High level output voltage PC930/PC931 V OH High level output current PC934/PC935 I OH Low level output current I OL Power dissipation PO Total power dissipation P tot *2 Isolation voltage V iso Operating temperature T opr Storage temperature T stg *3 Soldering temperature T sol Rating 20 1 6 70 - 0.5 to 16.0 - 0.5 to 7.0 - 0.5 to 16.0 - 800 50 150 170 5 000 - 25 to + 85 - 40 to + 125 260 Unit mA A V mW V V µA mA mW mW V rms ˚C ˚C ˚C 1 2 3 Amp * “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. *1 Pulse width