PQ1KAXX3MZPH

PQ1KAxx3MZPH Series PQ1KAxx3MZPH Series Compact Surface Mount Type Low Power-Loss Voltage Regulators Features 1.Compact surface mount package (3.4×2.2×1.2mm) 2.Output current : MAX.300mA 3.Built-in ON/OFF control function 4.Built-in overcurrent, overheat protection functions 5.Use of ceramic capacitor is possible as output smooth capacitor 6.RoHS directive compliant ■ Outline Dimensions (Unit : mm) 6 5 4 KA33 Lot No.(OLD DIN standard) 1 2 3 0.32±0.1×6 (0.95) (0.95) 0～0.1 1.2±0.2 0.15±0.1 (0.3) 3.8MAX (3.4) 1.4 MAX 2.2±0.2 1.CD-ROM drives 2.DVD-ROM drives Internal connection diagram 0.2 MIN 0.2 MIN 3.3±0.3 ( ) : Typical dimensions Product mass:(0.025g) 6 Model Line-up Output Voltage (TYP.) 1.5V 1.8V 2.5V 3.0V 3.3V 5.0V 9.0V 1 2 Specific IC 5 Model No. PQ1KA153MZPH PQ1KA183MZPH PQ1KA253MZPH PQ1KA303MZPH PQ1KA333MZPH PQ1KA503MZPH PQ1KA903MZPH 3 4 1 3 4 6 25 DC input(VIN) GND ON/OFF control terminal (VC) Noise reduction (Nr) DC output (VO) Lead finish:Lead-free solder plating (Composition: Sn2Cu) Absolute Maximum Ratings (Ta=25°C) Parameter *1 Symbol VIN VC IO PD Tj Topr Tstg Tsol Rating 15 15 300 400 150 Unit V V mA mW °C °C °C °C Input voltage control voltage Output current *1 Output *2 *3 Power dissipation Junction temperature Operating temperature Storage temperature Soldering temperature -40 to +85 -55 to +150 270(10s) *1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at Tj:125°C to 150°C Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: OP06063 15˚MAX Applications PQ1KAxx3MZPH Series Electrical Characteristics (Unless otherwise specified condition shall be VIN=VO(TYP.)+1.0V,IO=30mA,VC=1.8V,Ta=25°C) Parameter Output voltage Input voltage Load regulation Line regulation 4 Symbol VO VIN RegL RegI Temperature coefficient of output voltage TCVO Ripple rejection RR 4 Output noise voltage Vno(rms) Dropout voltage VI-O 7 On-state voltage for control VC(ON) On-state current for control IC(ON) Off-voltage for control VC(OFF) Quiescent current Iq Iqs Output off-state consumption current 4 5 6 7 Conditions ― ― VO