K1V38W

SHINDENGEN Sidac K1V38(W) OUTLINE DIMENSIONS Case : AX10 (Unit : mm) RATINGS ●Absolute Maximum Ratings Item Storage Temperature Operating Junction Temperature Maximum Off-state Voltage RMS On-state Current Surge On-state Current Symbol Tstg Tj VDRM IT Conditions Tl = 92℃, 50Hz sine wave (θ = 180°） Tj = 25℃, 50Hz sine wave (θ = 180°）, non-repetitive 1-cycle peak value Ta =25 ℃, pulse width to = 10 μs, sine wave, repetitive peak value f = 1 kHz Ta =25 ℃, pulse width to = 10 μs, sine wave, repetitive peak value f = 60 Hz ITSM Ratings -40～125 125 270 1 13 15 Unit ℃ ℃ V A A Pulse On-state Current ITRM A 40 50 Ratings 360～400 Max 10 Max 0.5 TYP 50 Max 3 Min 0.1 Max 15 Standard 0.55 A/μs Unit V μA mA mA V kΩ ℃/W Unit A Critical Rate of Rise of On-state Current diT/dt ●Electrical Characteristics (Tl=25℃) Item Symbol Breakover Voltage VBO Off-state Current IDRM Breakover Current IBO Holding Current IH On-state Voltage VT Switching Resistance RS Thermal Resistance θjl ●Standard Design with P.C.B. Item RMS On-state Current Conditions IB = 0, 50Hz sine wave VD = VDRM IT = 1A Junction to lead Conditions Symbol Assembled in P.C.B., Ta = 25℃, IT soldering land 3mmφ Copyright & Copy;2000 Shindengen Electric Mfg.Co.Ltd K1V33(W) K1V34(W) K1V36(W) K1V38(W) 10 Typical On-State Voltage Instantaneous On-State Current IT [A] Tl=125°C [TYP] 1 Tl=25 °C [TYP] Pulse measurement 0.1 2 2.5 3 3.5 Instantaneous On-State Voltage VT [V] K1V33(W) K1V34(W) K1V36(W) K1V38(W) 3.2 Tj=125°C Sine Wave Conduction Angle 180° 2.8 Power Dissipation 2.4 Power Dissipation P [W] 2 1.6 1.2 0.8 0.4 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 On-State Current IT (rms) [A] K1V33(W) K1V34(W) K1V36(W) K1V38(W) Transient Thermal Resistance θ ja Mounted on PCB 20mm 100 l θ jl Soldering land 3mmφ l = 2~15mm 10 1 Transient Thermal Resistance θja θjl [°C/W] 0.1 10-4 10-3 10-2 10-1 100 101 102 103 Duration t [s] K1V33(W) K1V34(W) K1V36(W) K1V38(W) Breakover Voltage - Junction Temperature 1.1 1.05 1 0.95 Breakover Voltage Ratio VBO(T) / VBO(Tj=25°C) 0.9 0.85 -40 0 20 -20 40 60 80 100 120 140 Junction Temperature Tj [°C] K1V33(W) K1V34(W) K1V36(W) K1V38(W) 1.4 Tj=125°C Sine Wave Conduction Angle 180° 1.2 Maximum Lead Temperature 1 On-State Current IT (rms) [A] 0.8 0.6 0.4 0.2 0 40 60 80 100 120 140 Allowable Lead Temperature Tl [°C] K1V33(W) K1V34(W) K1V36(W) K1V38(W) Maximum Ambient Temperature 1.2 Tj=125°C Sine Wave Conduction Angle 180° l 1 Soldering land 3mmφ l = 2~15mm Mounted on PCB 20mm On-State Current IT (rms) [A] 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 Allowable Ambient Temperature Ta [°C] K1V33(W) K1V34(W) K1V36(W) K1V38(W) 30 Maximum Surge On-State Current Non-repetitive Sine Wave 50Hz Conduction Angle 180° Free In Air Tj = 25°C 25 Surge On-State Current ITSM [A] 20 15 10 5 0 1 2 5 10 20 50 100 Number of Cycles [cycles] K1V33(W) K1V34(W) K1V36(W) K1V38(W) 1000 Pulse On-State Current Rating IP 0 t0 1/f Peak Pulse On-State Current IP [A] di T/dt limit line 100 Current Wave Form Free in air Sine Wave Ta = 25°C f = 1 ~ 120Hz f = 1kHz 10 f = 5kHz 1 1 2 5 10 20 50 100 200 Pulse Base Width t0 [ µs] K1V33(W) K1V34(W) K1V36(W) K1V38(W) 1.2 Pulse On-State Current Derating IP 0 t0 1 1/f Pulse On-State Current Ratio IP(T) / IP(Ta=25°C) Current Wave Form Free in air Sine Wave Ta = 25°C 0.8 f = 1 ~ 120Hz f = 1 ~ 5kHz 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 Ambient Temperature Ta [°C]