3RA22101CA152BB4

Data sheet 3RA2210-1CA15-2BB4 Load feeder fuseless, Reversing duty 400 V AC, Size S00 1.80...2.50 A 24 V DC screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NC (contactor) product brand name SIRIUS product designation Reversing starter design of the product for standard rail or screw mounting product type designation 3RA22 manufacturer's article number ● of the supplied contactor 3RT2015-1BB42 ● of the supplied circuit-breakers 3RV2011-1CA10 ● of the supplied link module 3RA1921-1DA00 General technical data size of the circuit-breaker S00 size of load feeder S00 insulation voltage with degree of pollution 3 at AC rated value 690 V surge voltage resistance rated value 6 kV degree of protection NEMA rating other shock resistance according to IEC 60068-2-27 6g / 11 ms mechanical service life (switching cycles) of contactor typical 30 000 000 type of assignment 2 type of protection according to ATEX directive 2014/34/EU Ex II (2) GD certificate of suitability according to ATEX directive 2014/34/EU DMT 02 ATEX F 001 Substance Prohibitance (Date) 10/01/2009 Ambient conditions ambient temperature ● during operation -20 ... +60 °C ● during storage -50 ... +80 °C ● during transport -50 ... +80 °C temperature compensation -20 ... +60 °C relative humidity during operation 10 ... 95 % Main circuit number of poles for main current circuit 3 design of the switching contact electromechanical adjustable current response value current of the current-dependent overload release 1.8 ... 2.5 A operating voltage ● rated value 690 V ● at AC-3 rated value maximum 690 V operating frequency rated value 3RA22101CA152BB4 Page 1/5 50 ... 60 Hz 7/9/2022 Subject to change without notice © Copyright Siemens operational current at AC-3 at 400 V rated value 1.9 A operating power at AC-3 ● at 400 V rated value 750 W Control circuit/ Control type of voltage of the control supply voltage DC control supply voltage at DC ● rated value 24 V ● rated value 24 ... 24 V holding power of magnet coil at DC 4W Auxiliary circuit product extension auxiliary switch Yes Protective and monitoring functions trip class CLASS 10 design of the overload release thermal (bimetallic) UL/CSA ratings full-load current (FLA) for 3-phase AC motor ● at 480 V rated value 2.5 A yielded mechanical performance [hp] ● for 3-phase AC motor — at 200/208 V rated value 0.5 hp — at 220/230 V rated value 0.5 hp — at 460/480 V rated value 1 hp — at 575/600 V rated value 1.5 hp Short-circuit protection product function short circuit protection Yes design of the short-circuit trip magnetic conditional short-circuit current (Iq) ● at 400 V according to IEC 60947-4-1 rated value 150 000 A Installation/ mounting/ dimensions mounting position vertical fastening method screw and snap-on mounting onto 35 mm standard mounting rail height 170 mm width 90 mm depth 97 mm required spacing ● for grounded parts — forwards 32 mm — backwards 0 mm — upwards 50 mm — at the side 10 mm — downwards 10 mm ● for live parts — forwards 32 mm — backwards 0 mm — upwards 50 mm — downwards 10 mm — at the side 10 mm Connections/ Terminals type of electrical connection ● for main current circuit screw-type terminals ● for auxiliary and control circuit screw-type terminals type of connectable conductor cross-sections ● for main contacts — stranded ● at AWG cables for main contacts connectable conductor cross-section for main contacts finely stranded with core end processing 0.5 ... 4 mm², 2x (0.75 ... 2.5 mm²) 2x (20 ... 16), only for contactor 2x (18 ... 14), 2x 12 0.5 ... 2.5 mm² Safety related data B10 value with high demand rate according to SN 31920 3RA22101CA152BB4 Page 2/5 1 000 000 7/9/2022 Subject to change without notice © Copyright Siemens proportion of dangerous failures ● with high demand rate according to SN 31920 touch protection on the front according to IEC 60529 73 % finger-safe, for vertical contact from the front Communication/ Protocol protocol is supported ● PROFINET IO protocol No ● PROFIsafe protocol No protocol is supported AS-Interface protocol No Certificates/ approvals General Product Approval For use in hazardous locations Declaration of Conformity other Railway Confirmation Declaration of Conformity Test Certificates Type Test Certificates/Test Report Marine / Shipping Special Test Certificate Marine / Shipping Confirmation Vibration and Shock Dangerous Good Transport Information Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RA2210-1CA15-2BB4 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RA2210-1CA15-2BB4 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RA2210-1CA15-2BB4 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RA2210-1CA15-2BB4&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RA2210-1CA15-2BB4/char Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RA2210-1CA15-2BB4&objecttype=14&gridview=view1 3RA22101CA152BB4 Page 3/5 7/9/2022 Subject to change without notice © Copyright Siemens 3RA22101CA152BB4 Page 4/5 7/9/2022 Subject to change without notice © Copyright Siemens last modified: 3RA22101CA152BB4 Page 5/5 2/16/2022 7/9/2022 Subject to change without notice © Copyright Siemens