3RA22204AD260AP0

Data sheet 3RA2220-4AD26-0AP0 Load feeder fuseless, Reversing duty 400 V AC, Size S0 10.0...16.0 A 230 V AC screw terminal for 60 mm busbar systems (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO+1 NC (contactor) product brand name SIRIUS product designation Reversing starter design of the product for 60 mm busbars product type designation 3RA22 manufacturer's article number ● of the supplied contactor 3RT2026-1AP00 ● of the supplied circuit-breakers 3RV2021-4AA10 ● of the supplied RS assembly kit 8US1250-5AT10 ● of the supplied busbar adapter 8US1251-5NT10 ● of the supplied link module 3RA2921-1AA00 General technical data size of the circuit-breaker S0 size of load feeder S0 insulation voltage with degree of pollution 3 at AC rated value 690 V surge voltage resistance rated value 6 kV degree of protection NEMA rating other shock resistance according to IEC 60068-2-27 6g / 11 ms mechanical service life (switching cycles) of contactor typical 10 000 000 type of assignment 2 type of protection according to ATEX directive 2014/34/EU Ex II (2) GD certificate of suitability according to ATEX directive 2014/34/EU DMT 02 ATEX F 001 Substance Prohibitance (Date) 10/01/2009 Ambient conditions ambient temperature ● during operation -20 ... +60 °C ● during storage -50 ... +80 °C ● during transport -50 ... +80 °C temperature compensation -20 ... +60 °C relative humidity during operation 10 ... 95 % Main circuit number of poles for main current circuit 3 design of the switching contact electromechanical adjustable current response value current of the current-dependent overload release 10 ... 16 A operating voltage ● rated value 690 V 3RA22204AD260AP0 Page 1/4 7/9/2022 Subject to change without notice © Copyright Siemens ● at AC-3 rated value maximum 690 V operating frequency rated value 50 ... 60 Hz operational current at AC-3 at 400 V rated value 15.5 A operating power at AC-3 ● at 400 V rated value 7 500 W Control circuit/ Control type of voltage of the control supply voltage AC control supply voltage at AC ● at 50 Hz rated value 230 V ● at 50 Hz rated value 230 ... 230 V apparent holding power of magnet coil at AC 9.8 VA Auxiliary circuit product extension auxiliary switch Yes Protective and monitoring functions trip class CLASS 10 design of the overload release thermal (bimetallic) UL/CSA ratings full-load current (FLA) for 3-phase AC motor ● at 480 V rated value 14 A yielded mechanical performance [hp] ● for 3-phase AC motor — at 220/230 V rated value 5 hp — at 460/480 V rated value 10 hp — at 575/600 V rated value 10 hp Short-circuit protection product function short circuit protection Yes design of the short-circuit trip magnetic conditional short-circuit current (Iq) ● at 400 V according to IEC 60947-4-1 rated value 150 000 A Installation/ mounting/ dimensions mounting position vertical fastening method for snapping onto 60 mm busbar systems height 260 mm width 90 mm depth 155 mm required spacing ● for grounded parts — forwards 32 mm — backwards 0 mm — upwards 50 mm — at the side 10 mm — downwards 10 mm ● for live parts — forwards 32 mm — backwards 0 mm — upwards 50 mm — downwards 10 mm — at the side 10 mm Connections/ Terminals type of electrical connection ● for main current circuit screw-type terminals ● for auxiliary and control circuit screw-type terminals Safety related data B10 value with high demand rate according to SN 31920 1 000 000 proportion of dangerous failures ● with high demand rate according to SN 31920 touch protection on the front according to IEC 60529 73 % finger-safe, for vertical contact from the front Communication/ Protocol protocol is supported 3RA22204AD260AP0 Page 2/4 7/9/2022 Subject to change without notice © Copyright Siemens ● PROFINET IO protocol No ● PROFIsafe protocol No protocol is supported AS-Interface protocol No Certificates/ approvals General Product Approval For use in hazardous locations Declaration of Conformity other Railway Confirmation Declaration of Conformity Test Certificates Special Test Certificate Marine / Shipping Type Test Certificates/Test Report Marine / Shipping Confirmation Vibration and Shock Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RA2220-4AD26-0AP0 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RA2220-4AD26-0AP0 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RA2220-4AD26-0AP0 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RA2220-4AD26-0AP0&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RA2220-4AD26-0AP0/char Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RA2220-4AD26-0AP0&objecttype=14&gridview=view1 3RA22204AD260AP0 Page 3/4 7/9/2022 Subject to change without notice © Copyright Siemens 13 NO 5/L3 3/L2 1/L1 13 NO -Q F -Q1 1 A2 2 last modified: 3RA22204AD260AP0 Page 4/4 3 5 21 -Q12 14 NO A2 22 22 NC 6 6/T3 4/T2 4 I> 2 4 6 A1 1 3 5 21 A2 2 4 6 22 22 NC A1 2/T1 -Q11 I> 14 NO I> 2/16/2022 7/9/2022 Subject to change without notice © Copyright Siemens