3RA64002DB43

Data sheet 3RA6400-2DB43 SIRIUS Compact load feeder DOL starter for IO-Link 690 V 24 V DC 3...12 A IP20 Connection main circuit: plug-in, without terminals Connection control circuit: Spring-type terminal product brand name SIRIUS product designation Compact starter for IO-Link design of the product direct starter product type designation 3RA64 General technical data product function control circuit interface to parallel wiring No product extension auxiliary switch Yes power loss [W] for rated value of the current at AC in hot operating state 1.8 W ● per pole 0.6 W power loss [W] for rated value of the current without load current share typical 2.9 W insulation voltage rated value 690 V degree of pollution 3 surge voltage resistance rated value 6 000 V degree of protection NEMA rating other shock resistance a=60 m/s2 (6g) with 10 ms per 3 shocks in all axes vibration resistance f= 4 ... 5.8 Hz, d= 15 mm; f= 5.8 ... 500 Hz, a= 20 m/s²; 10 cycles mechanical service life (switching cycles) ● of the main contacts typical 10 000 000 ● of auxiliary contacts typical 10 000 000 ● of the signaling contacts typical 10 000 000 electrical endurance (switching cycles) of auxiliary contacts ● at DC-13 at 6 A at 24 V typical 30 000 ● at AC-15 at 6 A at 230 V typical 200 000 type of assignment continous operation according to IEC 60947-6-2 reference code acc. to IEC 81346-2 Q Substance Prohibitance (Date) 01.05.2012 00:00:00 Ambient conditions installation altitude at height above sea level maximum 2 000 m ● ambient temperature during operation -20 ... +60 °C ● ambient temperature during storage -55 ... +80 °C ● ambient temperature during transport -55 ... +80 °C relative humidity during operation 10 ... 90 % Main circuit number of poles for main current circuit 3 adjustable current response value current of the 3 ... 12 A 3RA64002DB43 Page 1/2 1.19.2021 Subject to change without notice © Copyright Siemens current-dependent overload release formula for making capacity limit current 12 x Ie formula for breaking capacity limit current 10 x Ie yielded mechanical performance for 4-pole AC motor ● at 400 V rated value 5.5 kW ● at 500 V rated value 5.5 kW ● at 690 V rated value 7.5 kW ● operating voltage at AC-3 rated value maximum 690 V operational current ● at AC at 400 V rated value 12 A ● at AC-43 — at 400 V rated value 11.5 A — at 500 V rated value 12.4 A — at 690 V rated value 8.9 A operating power ● at AC-3 at 400 V rated value 5.5 kW ● at AC-43 — at 400 V rated value 5 500 W — at 500 V rated value 5 500 W — at 690 V rated value 7 500 W no-load switching frequency 3 600 1/h operating frequency ● at AC-41 acc. to IEC 60947-6-2 maximum 750 1/h ● at AC-43 acc. to IEC 60947-6-2 maximum 250 1/h Control circuit/ Control type of voltage DC holding power ● at DC maximum 2.9 W Auxiliary circuit number of NC contacts for auxiliary contacts 0 number of NO contacts for auxiliary contacts 0 number of NO contacts of instantaneous short-circuit trip unit for signaling contact 0 number of CO contacts of the current-dependent overload release for signaling contact 0 operational current of auxiliary contacts at AC-12 maximum 10 A operational current of auxiliary contacts at DC-13 at 250 V 0.27 A Protective and monitoring functions trip class CLASS 10 and 20 adjustable breaking capacity operating short-circuit current (Ics) ● at 400 V 53 kA ● at 500 V rated value 3 kA ● at 690 V rated value 3 kA UL/CSA ratings full-load current (FLA) for 3-phase AC motor ● at 480 V rated value 12 A ● at 600 V rated value 12 A yielded mechanical performance [hp] for 3-phase AC motor ● at 200/208 V rated value 3 hp ● at 220/230 V rated value 3 hp ● at 460/480 V rated value 7.5 hp ● at 575/600 V rated value 10 hp Short-circuit protection product function short circuit protection Yes design of short-circuit protection electromagnetic design of the fuse link 3RA64002DB43 Page 2/3 1.19.2021 Subject to change without notice © Copyright Siemens ● for short-circuit protection of the auxiliary switch required fuse gL/gG: 10 A Installation/ mounting/ dimensions mounting position ● recommended any vertical, on horizontal standard mounting rail fastening method screw and snap-on mounting height 191 mm width 45 mm depth 165 mm Connections/ Terminals product function ● removable terminal for main circuit Yes ● removable terminal for auxiliary and control circuit Yes type of electrical connection ● for main current circuit plug-in without terminals ● for auxiliary and control circuit spring-loaded terminals type of connectable conductor cross-sections ● for main contacts — solid 2x (1.5 ... 6 mm²), 1x 10 mm² — finely stranded with core end processing 2x (1.5 ... 6 mm²) — finely stranded without core end processing 2x (1.5 ... 6 mm²) ● at AWG cables for main contacts 2x (16 ... 10), 1x 8 type of connectable conductor cross-sections ● for auxiliary contacts — solid 2x (0.25 ... 1.5 mm²) — finely stranded with core end processing 2x (0.25 ... 1.5 mm²) — finely stranded without core end processing 2x (0.25 ... 1.5 mm²) ● at AWG cables for auxiliary contacts 2x (24 ... 16) Safety related data B10 value with high demand rate acc. to SN 31920 3 000 000 proportion of dangerous failures ● with high demand rate acc. to SN 31920 50 % Communication/ Protocol product function bus communication Yes protocol is supported ● IO-Link protocol Yes product function control circuit interface with IO link Yes IO-Link transfer rate COM2 (38,4 kBaud) point-to-point cycle time between master and IO-Link device minimum 2.5 ms type of voltage supply via input/output link master No data volume ● of the address range of the inputs with cyclical transfer total 2 byte ● of the address range of the outputs with cyclical transfer total 2 byte Electromagnetic compatibility conducted interference ● due to burst acc. to IEC 61000-4-4 4 kV main circuits, 2 kV auxiliary circuits, 2 kV IO-Link, 2 kV limit switches, 2 kV line hand-held device ● due to conductor-earth surge acc. to IEC 61000-4-5 4 kV main circuits, 0.5 kV auxiliary voltage with upstream overvoltage protection ● due to conductor-conductor surge acc. to IEC 61000-4-5 2 kV main circuits, 0.5 kV auxiliary voltage with upstream overvoltage protection ● due to high-frequency radiation acc. to IEC 610004-6 0.15-80Mhz at 10V field-based interference acc. to IEC 61000-4-3 80 ... 3000 MHz at 10V/m electrostatic discharge acc. to IEC 61000-4-2 8 kV conducted HF interference emissions acc. to CISPR11 150 kHz ... 30 MHz Class A field-bound HF interference emission acc. to CISPR11 30 ... 1000 MHz Class A 3RA64002DB43 Page 3/4 1.19.2021 Subject to change without notice © Copyright Siemens Supply voltage Supply voltage required Auxiliary voltage Yes Display number of LEDs 3 display version as status display of the input/output link device green/red dual LED Certificates/ approvals General Product Approval Declaration of Conformity Miscellaneous Marine / Shipping EMC Test Certificates Functional Safety/Safety of Machinery Marine / Shipping Type Test Certificates/Test Report other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RA6400-2DB43 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RA6400-2DB43 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RA6400-2DB43 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RA6400-2DB43&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RA6400-2DB43/char Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RA6400-2DB43&objecttype=14&gridview=view1 3RA64002DB43 Page 4/5 1.19.2021 Subject to change without notice © Copyright Siemens 3RA64002DB43 Page 5/6 1.19.2021 Subject to change without notice © Copyright Siemens last modified: 1/8/2021 3RA64002DB43 Page 6/6 1.19.2021 Subject to change without notice © Copyright Siemens