3RN20002AW30

Data sheet 3RN2000-2AW30 Thermistor motor protection relay Compact evaluation unit, 17.5 mm enclosure, spring-type terminals, 1 changeover contact, US = 24 V-240 V AC/DC, Auto RESET, suitable for bimetallic switch, supply =output voltage, 1 LED (tripped) product brand name SIRIUS product category SIRIUS 3RN2 thermistor motor protection product designation Thermistor motor protection relay design of the product Compact evaluation unit, suitable for bimetallic switch (terminal A1 jumpered with root of changeover contact) product type designation 3RN2 General technical data display version LED Yes power loss [W] for rated value of the current ● at AC in hot operating state 0.9 W ● at DC in hot operating state 0.9 W insulation voltage for overvoltage category III according to IEC 60664 with degree of pollution 3 rated value 300 V degree of pollution 3 surge voltage resistance rated value 4 kV protection class IP IP20 shock resistance acc. to IEC 60068-2-27 11g / 15 ms vibration resistance acc. to IEC 60068-2-6 10 ... 55 Hz: 0.35 mm mechanical service life (switching cycles) typical 10 000 000 electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 thermal current of the switching element with contacts maximum 5A reference code acc. to IEC 81346-2 K Control circuit/ Control type of voltage of the control supply voltage AC/DC control supply voltage at AC ● at 50 Hz rated value 24 ... 240 V ● at 60 Hz rated value 24 ... 240 V control supply voltage at DC ● rated value 24 ... 240 V operating range factor control supply voltage rated value at DC ● initial value 0.85 ● full-scale value 1.1 operating range factor control supply voltage rated value at AC at 50 Hz ● initial value 0.85 ● full-scale value 1.1 3RN20002AW30 Page 1/2 12.21.2020 Subject to change without notice © Copyright Siemens operating range factor control supply voltage rated value at AC at 60 Hz ● initial value 0.85 ● full-scale value 1.1 inrush current peak ● at 24 V 0.3 A ● at 240 V 8A duration of inrush current peak ● at 24 V 0.15 ms ● at 240 V 0.15 ms Measuring circuit buffering time in the event of power failure minimum 40 ms Precision relative metering precision 9% Auxiliary circuit material of switching contacts AgSnO2 number of NC contacts for auxiliary contacts 0 number of NO contacts for auxiliary contacts 0 number of CO contacts for auxiliary contacts 1 Main circuit operating frequency rated value 50 ... 60 Hz Outputs ampacity of the output relay at AC-15 at 250 V at 50/60 Hz 3A ampacity of the output relay at DC-13 ● at 24 V 1A ● at 125 V 0.2 A continuous current of the DIAZED fuse link of the output relay 6A Electromagnetic compatibility conducted interference ● due to burst acc. to IEC 61000-4-4 2 kV (power ports) / 1 kV (signal ports) ● due to conductor-earth surge acc. to IEC 61000-4-5 2 kV (line to ground) ● due to conductor-conductor surge acc. to IEC 61000-4-5 1 kV (line to line) electrostatic discharge acc. to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge Galvanic isolation design of the electrical isolation galvanic isolation galvanic isolation ● between input and output Yes ● between the voltage supply and other circuits No Connections/ Terminals product function removable terminal for auxiliary and control circuit Yes type of electrical connection Push-in terminal ● for auxiliary and control circuit spring-loaded terminals (push-in) type of connectable conductor cross-sections ● solid 0.5 ... 4 mm² ● finely stranded with core end processing 0.5 ... 2.5 mm² ● finely stranded without core end processing 0.5 ... 4 mm² ● at AWG cables solid 20 ... 12 ● at AWG cables stranded 20 ... 12 ● connectable conductor cross-section solid 0.5 ... 4 mm² ● connectable conductor cross-section finely stranded with core end processing 0.5 ... 2.5 mm² ● connectable conductor cross-section finely stranded without core end processing 0.5 ... 4 mm² ● AWG number as coded connectable conductor cross section solid 20 ... 12 3RN20002AW30 Page 2/3 12.21.2020 Subject to change without notice © Copyright Siemens ● AWG number as coded connectable conductor cross section stranded 20 ... 12 Installation/ mounting/ dimensions mounting position any fastening method screw and snap-on mounting onto 35 mm standard mounting rail height 100 mm width 17.5 mm depth 90 mm required spacing ● with side-by-side mounting — forwards 0 mm — backwards 0 mm — upwards 0 mm — downwards 0 mm — at the side 0 mm ● for grounded parts — forwards 0 mm — backwards 0 mm — upwards 0 mm — at the side 0 mm — downwards 0 mm ● for live parts — forwards 0 mm — backwards 0 mm — upwards 0 mm — downwards 0 mm — at the side 0 mm Ambient conditions installation altitude at height above sea level maximum 2 000 m ● ambient temperature during operation -25 ... +60 °C ● ambient temperature during storage -40 ... +85 °C ● ambient temperature during transport -40 ... +85 °C relative humidity during operation 70 % Certificates/ approvals General Product Approval EMC Declaration of Conformity Miscellaneous Declaration of Conformity Test Certificates Marine / Shipping Type Test Certificates/Test Report other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RN2000-2AW30 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RN2000-2AW30 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) 3RN20002AW30 Page 3/4 12.21.2020 Subject to change without notice © Copyright Siemens https://support.industry.siemens.com/cs/ww/en/ps/3RN2000-2AW30 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RN2000-2AW30&lang=en Characteristic: Derating https://support.industry.siemens.com/cs/ww/en/ps/3RN2000-2AW30/manual 3RN20002AW30 Page 4/5 12.21.2020 Subject to change without notice © Copyright Siemens last modified: 3RN20002AW30 Page 5/5 12/19/2020 12.21.2020 Subject to change without notice © Copyright Siemens