3RP25122AW30

Data sheet 3RP2512-2AW30 Timing relay, electronic ansprechverzögert 1 change-over contact, 1 time range 1.5...30 s 12-240 V AC/DC at 50/60 Hz AC with LED, Spring-type terminal (push-in) product brand name SIRIUS product designation timing relay design of the product slow-operating product type designation 3RP25 General technical data product component ● relay output Yes ● semi-conductor output No product extension required remote control No product extension optional remote control No insulation voltage for overvoltage category III according to IEC 60664 with degree of pollution 3 rated value 300 V test voltage for isolation test 2.5 kV degree of pollution 3 surge voltage resistance rated value 4 000 V protection class IP IP20 shock resistance acc. to IEC 60068-2-27 11g / 15 ms vibration resistance acc. to IEC 60068-2-6 10 ... 55 Hz / 0.35 mm mechanical service life (switching cycles) typical 10 000 000 electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 adjustable time 1 ... 30 s relative setting accuracy relating to full-scale value 5% thermal current 5A recovery time 250 ms reference code acc. to IEC 81346-2 K relative repeat accuracy 1% Control circuit/ Control type of voltage of the control supply voltage AC/DC control supply voltage 1 at AC ● at 50 Hz 12 ... 240 V ● at 60 Hz 12 ... 240 V control supply voltage frequency 1 ● control supply voltage 1 at DC 50 ... 60 Hz 12 ... 240 V operating range factor control supply voltage rated value at DC ● initial value 0.8 ● full-scale value 1.1 3RP25122AW30 Page 1/2 12.19.2020 Subject to change without notice © Copyright Siemens operating range factor control supply voltage rated value at AC at 50 Hz ● initial value 0.8 ● full-scale value 1.1 operating range factor control supply voltage rated value at AC at 60 Hz ● initial value 0.8 ● full-scale value 1.1 inrush current peak ● at 24 V 0.4 A ● at 240 V 5A duration of inrush current peak ● at 24 V 0.3 ms ● at 240 V 0.5 ms Switching Function switching function ● ON-delay Yes ● ON-delay/instantaneous contact No ● passing make contact No ● passing make contact/instantaneous contact No ● OFF delay No switching function ● flashing symmetrically with interval start/instantaneous No ● flashing symmetrically with interval start No ● flashing symmetrically with pulse start/instantaneous No ● flashing symmetrically with pulse start No ● flashing asymmetrically with interval start No ● flashing asymmetrically with pulse start No switching function ● star-delta circuit with delay time No ● star-delta circuit No switching function with control signal ● additive ON-delay No ● passing break contact No ● passing break contact/instantaneous No ● OFF delay No ● OFF delay/instantaneous No ● pulse delayed No ● pulse delayed/instantaneous No ● pulse-shaping No ● pulse-shaping/instantaneous No ● additive ON-delay/instantaneous No ● ON-delay/OFF-delay/instantaneous No ● passing make contact No ● passing make contact/instantaneous contact No switching function of interval relay with control signal ● retrotriggerable with deactivated control signal/instantaneous contact No ● retrotriggerable with switched-on control signal No ● retrotriggerable with switched-on control signal/instantaneous contact No ● retriggerable with deactivated control signal No Short-circuit protection design of the fuse link for short-circuit protection of the auxiliary switch required fuse gL/gG: 4 A Auxiliary circuit material of switching contacts AgSnO2 number of NC contacts delayed switching 0 3RP25122AW30 Page 2/3 12.19.2020 Subject to change without notice © Copyright Siemens number of NO contacts delayed switching 0 number of CO contacts delayed switching 1 operational current of auxiliary contacts at AC-15 ● at 24 V 3A ● at 250 V 3A operational current of auxiliary contacts at DC-13 ● at 24 V 1A ● at 125 V 0.2 A ● at 250 V 0.1 A operating frequency with 3RT2 contactor maximum 5 000 1/h contact reliability of auxiliary contacts one incorrect switching operation of 100 million switching operations (17 V, 5 mA) contact rating of auxiliary contacts according to UL R300 / B300 influence of the surrounding temperature 1% in the whole temperature range to the set runtime power supply influence 1% in the whole voltage range to the set runtime switching capacity current with inductive load 0.01 ... 3 A Inputs/ Outputs product function ● at the relay outputs switchover delayed/without delay No ● non-volatile No Electromagnetic compatibility EMC immunity acc. to IEC 61812-1 EN 61000-6-2 conducted interference ● due to burst acc. to IEC 61000-4-4 2 kV network connection / 1 kV control connection ● due to conductor-earth surge acc. to IEC 61000-4-5 2 kV ● due to conductor-conductor surge acc. to IEC 61000-4-5 1 kV field-based interference acc. to IEC 61000-4-3 10 V/m electrostatic discharge acc. to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge Safety related data touch protection against electrical shock finger-safe type of insulation Basic insulation category acc. to EN 954-1 none Connections/ Terminals product function removable terminal for auxiliary and control circuit Yes type of electrical connection for auxiliary and control circuit spring-loaded terminals (push-in) type of connectable conductor cross-sections ● solid 0.5 ... 4 mm² ● finely stranded with core end processing 0.5 ... 2.5 mm² ● finely stranded without core end processing 0.5 ... 4 mm² ● at AWG cables solid 20 ... 12 ● at AWG cables stranded 20 ... 12 ● connectable conductor cross-section solid 0.5 ... 4 mm² ● connectable conductor cross-section finely stranded with core end processing 0.5 ... 2.5 mm² ● connectable conductor cross-section finely stranded without core end processing 0.5 ... 4 mm² ● AWG number as coded connectable conductor cross section solid 20 ... 12 ● AWG number as coded connectable conductor cross section stranded 20 ... 12 Installation/ mounting/ dimensions mounting position any fastening method screw and snap-on mounting onto 35 mm standard mounting rail height 100 mm width 17.5 mm depth 90 mm 3RP25122AW30 Page 3/4 12.19.2020 Subject to change without notice © Copyright Siemens required spacing ● with side-by-side mounting — forwards 0 mm — backwards 0 mm — upwards 0 mm — downwards 0 mm — at the side 0 mm ● for grounded parts — forwards 0 mm — backwards 0 mm — upwards 0 mm — at the side 0 mm — downwards 0 mm ● for live parts — forwards 0 mm — backwards 0 mm — upwards 0 mm — downwards 0 mm — at the side 0 mm Ambient conditions installation altitude at height above sea level maximum 2 000 m ● ambient temperature during operation -25 ... +60 °C ● ambient temperature during storage -40 ... +85 °C ● ambient temperature during transport -40 ... +85 °C relative humidity during operation 10 ... 95 % Certificates/ approvals General Product Approval EMC Declaration of Conformity Miscellaneous Declaration of Conformity Test Certificates Marine / Shipping Type Test Certificates/Test Report Marine / Shipping other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RP2512-2AW30 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RP2512-2AW30 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) 3RP25122AW30 Page 4/5 12.19.2020 Subject to change without notice © Copyright Siemens https://support.industry.siemens.com/cs/ww/en/ps/3RP2512-2AW30 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RP2512-2AW30&lang=en Characteristic: Derating https://support.industry.siemens.com/cs/ww/en/ps/3RP2512-2AW30/manual 3RP25122AW30 Page 5/6 12.19.2020 Subject to change without notice © Copyright Siemens last modified: 3RP25122AW30 Page 6/6 10/29/2020 12.19.2020 Subject to change without notice © Copyright Siemens