3RT2024-1AP00

Data sheet 3RT2024-1AP00 CONTACTOR, AC-3, 5.5KW/400V, 1NO+1NC, AC 230V 50HZ, 3POLE, SZ S0 SCREW TERMINAL Product brand name SIRIUS Product designation Power contactor Product type designation 3RT2 General technical data Size of contactor S0 Product extension ● function module for communication No ● Auxiliary switch Yes Insulation voltage ● rated value Surge voltage resistance rated value 690 V 6 kV maximum permissible voltage for safe isolation ● between coil and main contacts acc. to EN 60947-1 400 V Protection class IP ● on the front IP20 ● of the terminal IP20 Shock resistance at rectangular impulse ● at AC 3RT2024-1AP00 Page 1/11 7,5g / 5 ms, 4,7g / 10 ms 11/27/2017 Subject to change without notice © Copyright Siemens Shock resistance with sine pulse ● at AC 11,8g / 5 ms, 7,4g / 10 ms Mechanical service life (switching cycles) ● of contactor typical 10 000 000 ● of the contactor with added electronicscompatible auxiliary switch block typical 5 000 000 ● of the contactor with added auxiliary switch block typical 10 000 000 Equipment marking ● acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 K ● acc. to DIN EN 61346-2 Q Ambient conditions Installation altitude at height above sea level ● maximum 2 000 m Ambient temperature ● during operation -25 ... +60 °C ● during storage -55 ... +80 °C Main circuit Number of poles for main current circuit 3 Number of NO contacts for main contacts 3 Operating voltage ● at AC-3 rated value maximum 690 V Operating current ● at AC-1 at 400 V — at ambient temperature 40 °C rated value 40 A ● at AC-1 — up to 690 V at ambient temperature 40 °C rated value 40 A — up to 690 V at ambient temperature 60 °C rated value 35 A ● at AC-2 at 400 V rated value 12 A ● at AC-3 — at 400 V rated value 12 A — at 500 V rated value 12 A — at 690 V rated value 9 A Connectable conductor cross-section in main circuit at AC-1 ● at 60 °C minimum permissible 10 mm² ● at 40 °C minimum permissible 10 mm² Operating current for approx. 200000 operating cycles at AC-4 3RT2024-1AP00 Page 2/11 11/27/2017 Subject to change without notice © Copyright Siemens ● at 400 V rated value 5.5 A ● at 690 V rated value 5.5 A Operating current ● at 1 current path at DC-1 — at 24 V rated value 35 A — at 110 V rated value 4.5 A — at 220 V rated value 1 A — at 440 V rated value 0.4 A — at 600 V rated value 0.25 A ● with 2 current paths in series at DC-1 — at 24 V rated value 35 A — at 110 V rated value 35 A — at 220 V rated value 5 A — at 440 V rated value 1 A — at 600 V rated value 0.8 A ● with 3 current paths in series at DC-1 — at 24 V rated value 35 A — at 110 V rated value 35 A — at 220 V rated value 35 A — at 440 V rated value 2.9 A — at 600 V rated value 1.4 A Operating current ● at 1 current path at DC-3 at DC-5 — at 24 V rated value 20 A — at 110 V rated value 2.5 A — at 220 V rated value 1 A — at 440 V rated value 0.09 A — at 600 V rated value 0.06 A ● with 2 current paths in series at DC-3 at DC-5 — at 24 V rated value 35 A — at 110 V rated value 15 A — at 220 V rated value 3 A — at 440 V rated value 0.27 A — at 600 V rated value 0.16 A ● with 3 current paths in series at DC-3 at DC-5 — at 24 V rated value 35 A — at 110 V rated value 35 A — at 220 V rated value 10 A — at 440 V rated value 0.6 A — at 600 V rated value 0.6 A Operating power 3RT2024-1AP00 Page 3/11 11/27/2017 Subject to change without notice © Copyright Siemens ● at AC-1 — at 230 V rated value 13.3 kW — at 230 V at 60 °C rated value 13.3 kW — at 400 V rated value 23 kW — at 400 V at 60 °C rated value 23 kW — at 690 V rated value 40 kW — at 690 V at 60 °C rated value 40 kW ● at AC-2 at 400 V rated value 5.5 kW ● at AC-3 — at 230 V rated value 3 kW — at 400 V rated value 5.5 kW — at 500 V rated value 5.5 kW — at 690 V rated value 7.5 kW Operating power for approx. 200000 operating cycles at AC-4 ● at 400 V rated value 2.6 kW ● at 690 V rated value 4.6 kW Thermal short-time current limited to 10 s 110 A Power loss [W] at AC-3 at 400 V for rated value of the operating current per conductor 0.5 W No-load switching frequency ● at AC 5 000 1/h Operating frequency ● at AC-1 maximum 1 000 1/h ● at AC-2 maximum 1 000 1/h ● at AC-3 maximum 1 000 1/h ● at AC-4 maximum 300 1/h Control circuit/ Control Type of voltage of the control supply voltage AC Control supply voltage at AC ● at 50 Hz rated value 230 V Operating range factor control supply voltage rated value of magnet coil at AC ● at 50 Hz 0.8 ... 1.1 Apparent pick-up power of magnet coil at AC ● at 50 Hz 65 V·A Inductive power factor with closing power of the coil ● at 50 Hz 0.82 Apparent holding power of magnet coil at AC ● at 50 Hz 7.6 V·A Inductive power factor with the holding power of the coil 3RT2024-1AP00 Page 4/11 11/27/2017 Subject to change without notice © Copyright Siemens ● at 50 Hz 0.25 Closing delay ● at AC 9 ... 38 ms Opening delay ● at AC 4 ... 16 ms Arcing time 10 ... 10 ms Control version of the switch operating mechanism Standard A1 - A2 Residual current of the electronics for control with signal ● at AC at 230 V maximum permissible 6 mA ● at DC at 24 V maximum permissible 16 mA Auxiliary circuit Number of NC contacts ● for auxiliary contacts — instantaneous contact 1 Number of NO contacts ● for auxiliary contacts — instantaneous contact Operating current at AC-12 maximum 1 10 A Operating current at AC-15 ● at 230 V rated value 10 A ● at 400 V rated value 3 A ● at 500 V rated value 2 A ● at 690 V rated value 1 A Operating current at DC-12 ● at 24 V rated value 10 A ● at 48 V rated value 6 A ● at 60 V rated value 6 A ● at 110 V rated value 3 A ● at 125 V rated value 2 A ● at 220 V rated value 1 A ● at 600 V rated value 0.15 A Operating current at DC-13 ● at 24 V rated value 10 A ● at 48 V rated value 2 A ● at 60 V rated value 2 A ● at 110 V rated value 1 A ● at 125 V rated value 0.9 A ● at 220 V rated value 0.3 A ● at 600 V rated value 0.1 A Contact reliability of auxiliary contacts 3RT2024-1AP00 Page 5/11 1 faulty switching per 100 million (17 V, 1 mA) 11/27/2017 Subject to change without notice © Copyright Siemens UL/CSA ratings Full-load current (FLA) for three-phase AC motor ● at 480 V rated value 11 A ● at 600 V rated value 11 A Yielded mechanical performance [hp] ● for single-phase AC motor — at 110/120 V rated value 1 hp — at 230 V rated value 2 hp ● for three-phase AC motor — at 200/208 V rated value 3 hp — at 220/230 V rated value 3 hp — at 460/480 V rated value 7.5 hp — at 575/600 V rated value 10 hp Contact rating of auxiliary contacts according to UL A600 / Q600 Short-circuit protection Design of the fuse link ● for short-circuit protection of the main circuit — with type of coordination 1 required gG NH 3NA, DIAZED 5SB, NEOZED 5SE: 63 A — with type of assignment 2 required gG NH 3NA, DIAZED 5SB, NEOZED 5SE: 25 A ● for short-circuit protection of the auxiliary switch required fuse gG: 10 A Installation/ mounting/ dimensions Mounting position +/-180° rotation possible on vertical mounting surface; can be tilted forward and backward by +/- 22.5° on vertical mounting surface Mounting type screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 ● Side-by-side mounting Yes Height 85 mm Width 45 mm Depth 97 mm Required spacing ● for grounded parts — at the side 6 mm ● for live parts — at the side 6 mm Connections/Terminals Type of electrical connection ● for main current circuit screw-type terminals ● for auxiliary and control current circuit screw-type terminals Type of connectable conductor cross-sections 3RT2024-1AP00 Page 6/11 11/27/2017 Subject to change without notice © Copyright Siemens ● for main contacts — solid 2x (1 ... 2.5 mm²), 2x (2.5 ... 10 mm²) — single or multi-stranded 2x (1 ... 2,5 mm²), 2x (2,5 ... 10 mm²) — finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), 1x 10 mm² ● at AWG conductors for main contacts 2x (16 ... 12), 2x (14 ... 8) Connectable conductor cross-section for main contacts ● solid 1 ... 10 mm² ● stranded 1 ... 10 mm² Type of connectable conductor cross-sections ● for auxiliary contacts — single or multi-stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²) — finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) ● at AWG conductors for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14) Safety related data B10 value ● with high demand rate acc. to SN 31920 1 000 000 Proportion of dangerous failures ● with low demand rate acc. to SN 31920 40 % ● with high demand rate acc. to SN 31920 73 % Failure rate [FIT] ● with low demand rate acc. to SN 31920 100 FIT Product function ● Mirror contact acc. to IEC 60947-4-1 Yes T1 value for proof test interval or service life acc. to IEC 61508 20 y Protection against electrical shock finger-safe Certificates/approvals 3RT2024-1AP00 Page 7/11 11/27/2017 Subject to change without notice © Copyright Siemens General Product Approval EMC KC Functional Safety/Safety of Machinery Declaration of Conformity Type Examination Test Certificates Marine / Shipping Type Test Certificates/Test Report Special Test Certificate Marine / Shipping other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RT2024-1AP00 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RT2024-1AP00 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RT2024-1AP00 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RT2024-1AP00&lang=en 3RT2024-1AP00 Page 8/11 11/27/2017 Subject to change without notice © Copyright Siemens 45 97 35.1 4.8 3 / L2 5 / L3 75 85 43 1 / L1 4. 5. 6. 5 7.5 2.5 3. 5 3RT2024-1AP00 Page 9/11 5 11/27/2017 Subject to change without notice © Copyright Siemens 3RT2024-1AP00 Page 10/11 11/27/2017 Subject to change without notice © Copyright Siemens -Q last modified: 3RT2024-1AP00 Page 11/11 A1 1 /L1 3 /L2 5 /L3 13 21 A2 2 /T1 4 /T2 6 /T3 14 22 11/26/2017 11/27/2017 Subject to change without notice © Copyright Siemens