3RV1011-1GA15

Data sheet 3RV1011-1GA15 Circuit breaker size S00 for motor protection, CLASS 10 A-release 4.5...6.3 A N-release 82 A Screw terminal Standard switching capacity with transverse auxiliary switch 1 NO+1 NC product brand name SIRIUS product designation Circuit breaker design of the product For motor protection product type designation 3RV1 General technical data size of the circuit-breaker S00 size of contactor can be combined company-specific S00 product extension auxiliary switch Yes power loss [W] for rated value of the current ● at AC in hot operating state 7.25 W ● at AC in hot operating state per pole 2.4 W insulation voltage with degree of pollution 3 at AC rated value 690 V surge voltage resistance rated value 6 kV maximum permissible voltage for safe isolation in networks with grounded star point ● between main and auxiliary circuit 400 V ● between main and auxiliary circuit 400 V mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 electrical endurance (switching cycles) typical 100 000 reference code acc. to IEC 81346-2 Q Substance Prohibitance (Date) 01.01.2013 00:00:00 Ambient conditions installation altitude at height above sea level maximum 2 000 m ● ambient temperature during operation -20 ... +60 °C ● ambient temperature during storage -50 ... +80 °C ● ambient temperature during transport -50 ... +80 °C temperature compensation -20 ... +60 °C relative humidity during operation 10 ... 95 % Main circuit number of poles for main current circuit 3 adjustable current response value current of the current-dependent overload release 4.5 ... 6.3 A ● operating voltage rated value 690 V ● operating voltage at AC-3 rated value maximum 690 V operating frequency rated value 3RV10111GA15 Page 1/2 50 ... 60 Hz 1.21.2021 Subject to change without notice © Copyright Siemens operational current rated value 6.3 A operational current at AC-3 at 400 V rated value 6.3 A operating power at AC-3 ● at 230 V rated value 1 500 W ● at 400 V rated value 2 200 W ● at 500 V rated value 3 000 W ● at 690 V rated value 5 500 W operating frequency at AC-3 maximum 15 1/h Auxiliary circuit design of the auxiliary switch transverse number of NC contacts for auxiliary contacts 1 ● note number of NO contacts for auxiliary contacts ● note number of CO contacts for auxiliary contacts 1 1 1 0 operational current of auxiliary contacts at AC-15 ● at 24 V 2A ● at 110 V 2A ● at 120 V 2A ● at 125 V 2A ● at 230 V 0.5 A operational current of auxiliary contacts at DC-13 ● at 24 V 1A ● at 60 V 0.15 A Protective and monitoring functions product function ● ground fault detection No ● phase failure detection Yes trip class CLASS 10 design of the overload release thermal breaking capacity operating short-circuit current (Ics) at AC ● at 240 V rated value 100 kA ● at 400 V rated value 100 kA ● at 500 V rated value 3 kA ● at 690 V rated value 2 kA breaking capacity maximum short-circuit current (Icu) ● at AC at 240 V rated value 100 kA ● at AC at 400 V rated value 100 kA ● at AC at 500 V rated value 3 kA ● at AC at 690 V rated value 2 kA response value current of instantaneous short-circuit trip unit 82 A UL/CSA ratings full-load current (FLA) for 3-phase AC motor ● at 480 V rated value 6.3 A ● at 600 V rated value 6.3 A yielded mechanical performance [hp] ● for single-phase AC motor — at 110/120 V rated value 0.25 hp — at 230 V rated value 0.5 hp ● for 3-phase AC motor — at 200/208 V rated value 1 hp — at 220/230 V rated value 1.5 hp — at 460/480 V rated value 3 hp — at 575/600 V rated value 5 hp contact rating of auxiliary contacts according to UL C300 / R300 Short-circuit protection 3RV10111GA15 Page 2/3 1.21.2021 Subject to change without notice © Copyright Siemens product function short circuit protection Yes design of the short-circuit trip magnetic design of the fuse link ● for short-circuit protection of the auxiliary switch required fuse gG: 10 A, miniature circuit breaker C 6 A (short-circuit current Ik < 400 A) design of the fuse link for IT network for short-circuit protection of the main circuit ● at 240 V none required ● at 400 V gL/gG 50 A ● at 500 V gL/gG 40 A ● at 690 V gL/gG 40 A Installation/ mounting/ dimensions mounting position any fastening method screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 height 90 mm width 45 mm depth 75 mm required spacing ● for grounded parts at 400 V — downwards 20 mm — upwards 20 mm — at the side 9 mm ● for live parts at 400 V — downwards 20 mm — upwards 20 mm — at the side 9 mm ● for grounded parts at 500 V — downwards 20 mm — upwards 20 mm — at the side 9 mm ● for live parts at 500 V — downwards 20 mm — upwards 20 mm — at the side 9 mm ● for grounded parts at 690 V — downwards 20 mm — upwards 20 mm — backwards 0 mm — at the side 9 mm — forwards 0 mm ● for live parts at 690 V — downwards 20 mm — upwards 20 mm — backwards 0 mm — at the side 9 mm — forwards 0 mm Connections/ Terminals product function removable terminal for auxiliary and control circuit No type of electrical connection ● for main current circuit screw-type terminals ● for auxiliary and control circuit screw-type terminals arrangement of electrical connectors for main current circuit Top and bottom type of connectable conductor cross-sections ● for main contacts — solid or stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²), 2x (1 ... 4 mm²) — finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) 3RV10111GA15 Page 3/4 1.21.2021 Subject to change without notice © Copyright Siemens type of connectable conductor cross-sections ● for auxiliary contacts — solid or stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²) ● tightening torque for main contacts with screw-type terminals 0.8 ... 1.2 N·m ● tightening torque for auxiliary contacts with screwtype terminals 0.8 ... 1.2 N·m size of the screwdriver tip Pozidriv 2 design of the thread of the connection screw ● for main contacts M3 ● of the auxiliary and control contacts M3 Safety related data B10 value ● with high demand rate acc. to SN 31920 5 000 proportion of dangerous failures ● with low demand rate acc. to SN 31920 50 % ● with high demand rate acc. to SN 31920 50 % failure rate [FIT] ● with low demand rate acc. to SN 31920 50 FIT protection class IP on the front acc. to IEC 60529 IP20 touch protection on the front acc. to IEC 60529 finger-safe, for vertical contact from the front display version for switching status Rocker switch Certificates/ approvals General Product Approval Declaration of Conformity Miscellaneous For use in hazardous locations Test Certificates Special Test Certificate Marine / Shipping Type Test Certificates/Test Report Marine / Shipping other Miscellaneous other Confirmation Railway Special Test Certificate Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RV1011-1GA15 3RV10111GA15 Page 4/5 1.21.2021 Subject to change without notice © Copyright Siemens Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RV1011-1GA15 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RV1011-1GA15 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RV1011-1GA15&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RV1011-1GA15/char Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RV1011-1GA15&objecttype=14&gridview=view1 3RV10111GA15 Page 5/6 1.21.2021 Subject to change without notice © Copyright Siemens last modified: 3RV10111GA15 Page 6/6 12/15/2020 1.21.2021 Subject to change without notice © Copyright Siemens