3RW50762AB15

Data sheet 3RW5076-2AB15 SIRIUS soft starter 200-600 V 470 A, 110-250 V AC Spring-loaded terminals Analog output product brand name SIRIUS product category Hybrid switching devices product designation Soft starter product type designation 3RW50 manufacturer's article number ● of standard HMI module usable 3RW5980-0HS01 ● of high feature HMI module usable 3RW5980-0HF00 ● of communication module PROFINET standard usable 3RW5980-0CS00 ● of communication module PROFIBUS usable 3RW5980-0CP00 ● of communication module Modbus TCP usable 3RW5980-0CT00 ● of communication module Modbus RTU usable 3RW5980-0CR00 ● of communication module Ethernet/IP 3RW5980-0CE00 ● of circuit breaker usable at 400 V 3VA2580-6HN32-0AA0; Type of assignment 1, Iq = 65 kA ● of circuit breaker usable at 500 V 3VA2580-6HN32-0AA0; Type of assignment 1, Iq = 65 kA ● of the gG fuse usable up to 690 V 2x3NA3365-6; Type of coordination 1, Iq = 65 kA ● of full range R fuse link for semiconductor protection usable up to 690 V 3NE1 436-2; Type of coordination 2, Iq = 65 kA ● of back-up R fuse link for semiconductor protection usable up to 690 V 3NE3 340-8; Type of coordination 2, Iq = 65 kA ● of line contactor usable up to 480 V 3RT1076 ● of line contactor usable up to 690 V 3RT1076 General technical data starting voltage [%] 30 ... 100 % stopping voltage [%] 50 %; non-adjustable start-up ramp time of soft starter 0 ... 20 s ramp-down time of soft starter 0 ... 20 s current limiting value [%] adjustable 130 ... 700 % accuracy class according to IEC 61557-12 5% certificate of suitability ● CE marking Yes ● UL approval Yes ● CSA approval Yes product component ● HMI-High Feature No ● is supported HMI-Standard Yes ● is supported HMI-High Feature Yes product feature integrated bypass contact system Yes number of controlled phases 2 trip class CLASS 10A / 10E (preset) / 20E; acc. to IEC 60947-4-2 3RW50762AB15 Page 1/7 7/8/2022 Subject to change without notice © Copyright Siemens buffering time in the event of power failure ● for main current circuit 100 ms ● for control circuit 100 ms insulation voltage rated value 600 V degree of pollution 3, acc. to IEC 60947-4-2 impulse voltage rated value 6 kV blocking voltage of the thyristor maximum 1 600 V service factor 1 surge voltage resistance rated value 6 kV maximum permissible voltage for safe isolation ● between main and auxiliary circuit 600 V shock resistance 15 g / 11 ms, from 12 g / 11 ms with potential contact lifting vibration resistance 15 mm to 6 Hz; 2g to 500 Hz utilization category according to IEC 60947-4-2 AC-53a reference code according to IEC 81346-2 Q Substance Prohibitance (Date) 09/23/2019 product function ● ramp-up (soft starting) Yes ● ramp-down (soft stop) Yes ● Soft Torque Yes ● adjustable current limitation Yes ● pump ramp down Yes ● intrinsic device protection Yes ● motor overload protection Yes; Electronic motor overload protection ● evaluation of thermistor motor protection No ● auto-RESET Yes ● manual RESET Yes ● remote reset Yes; By turning off the control supply voltage ● communication function Yes ● operating measured value display Yes; Only in conjunction with special accessories ● error logbook Yes; Only in conjunction with special accessories ● via software parameterizable No ● via software configurable Yes ● PROFIenergy Yes; in connection with the PROFINET Standard communication module ● voltage ramp Yes ● torque control No ● analog output Yes; 4 ... 20 mA (default) / 0 ... 10 V (parameterizable with High Feature HMI) Power Electronics operational current ● at 40 °C rated value 470 A ● at 50 °C rated value 416 A ● at 60 °C rated value 380 A operating voltage ● rated value 200 ... 600 V relative negative tolerance of the operating voltage -15 % relative positive tolerance of the operating voltage 10 % operating power for 3-phase motors ● at 230 V at 40 °C rated value 132 kW ● at 400 V at 40 °C rated value 250 kW ● at 500 V at 40 °C rated value 315 kW Operating frequency 1 rated value 50 Hz Operating frequency 2 rated value 60 Hz relative negative tolerance of the operating frequency -10 % relative positive tolerance of the operating frequency 10 % adjustable motor current ● at rotary coding switch on switch position 1 200 A ● at rotary coding switch on switch position 2 218 A ● at rotary coding switch on switch position 3 236 A 3RW50762AB15 Page 2/7 7/8/2022 Subject to change without notice © Copyright Siemens ● at rotary coding switch on switch position 4 254 A ● at rotary coding switch on switch position 5 272 A ● at rotary coding switch on switch position 6 290 A ● at rotary coding switch on switch position 7 308 A ● at rotary coding switch on switch position 8 326 A ● at rotary coding switch on switch position 9 344 A ● at rotary coding switch on switch position 10 362 A ● at rotary coding switch on switch position 11 380 A ● at rotary coding switch on switch position 12 398 A ● at rotary coding switch on switch position 13 416 A ● at rotary coding switch on switch position 14 434 A ● at rotary coding switch on switch position 15 452 A ● at rotary coding switch on switch position 16 470 A ● minimum 200 A minimum load [%] 15 %; Relative to smallest settable Ie power loss [W] for rated value of the current at AC ● at 40 °C after startup 56 W ● at 50 °C after startup 44 W ● at 60 °C after startup 37 W power loss [W] at AC at current limitation 350 % ● at 40 °C during startup 5 344 W ● at 50 °C during startup 4 438 W ● at 60 °C during startup 3 876 W type of the motor protection Electronic, tripping in the event of thermal overload of the motor Control circuit/ Control type of voltage of the control supply voltage AC control supply voltage at AC ● at 50 Hz 110 ... 250 V ● at 60 Hz 110 ... 250 V relative negative tolerance of the control supply voltage at AC at 50 Hz -15 % relative positive tolerance of the control supply voltage at AC at 50 Hz 10 % relative negative tolerance of the control supply voltage at AC at 60 Hz -15 % relative positive tolerance of the control supply voltage at AC at 60 Hz 10 % control supply voltage frequency 50 ... 60 Hz relative negative tolerance of the control supply voltage frequency -10 % relative positive tolerance of the control supply voltage frequency 10 % control supply current in standby mode rated value 30 mA holding current in bypass operation rated value 105 mA locked-rotor current at close of bypass contact maximum 2.2 A inrush current peak at application of control supply voltage maximum 12.2 A duration of inrush current peak at application of control supply voltage 2.2 ms design of the overvoltage protection Varistor design of short-circuit protection for control circuit 4 A gG fuse (Icu=1 kA), 6 A quick-acting fuse (Icu=1 kA), C1 miniature circuit breaker (Icu= 600 A), C6 miniature circuit breaker (Icu= 300 A); Is not part of scope of supply Inputs/ Outputs number of digital inputs 1 number of digital outputs 3 ● not parameterizable 2 digital output version 2 normally-open contacts (NO) / 1 changeover contact (CO) number of analog outputs 1 switching capacity current of the relay outputs ● at AC-15 at 250 V rated value 3RW50762AB15 Page 3/7 3A 7/8/2022 Subject to change without notice © Copyright Siemens ● at DC-13 at 24 V rated value 1A Installation/ mounting/ dimensions mounting position with vertical mounting surface +/-90° rotatable, with vertical mounting surface +/- 22.5° tiltable to the front and back fastening method screw fixing height 230 mm width 160 mm depth 282 mm required spacing with side-by-side mounting ● forwards 10 mm ● backwards 0 mm ● upwards 100 mm ● downwards 75 mm ● at the side 5 mm weight without packaging 7.3 kg Connections/ Terminals type of electrical connection ● for main current circuit busbar connection ● for control circuit spring-loaded terminals width of connection bar maximum 35 mm; with connection cover 3RT1966-4EA1 maximum length 45 mm type of connectable conductor cross-sections ● for main contacts for box terminal using the front clamping point solid 95 ... 300 mm² ● for main contacts for box terminal using the front clamping point finely stranded with core end processing 70 ... 240 mm² ● for main contacts for box terminal using the front clamping point finely stranded without core end processing 70 ... 240 mm² ● for main contacts for box terminal using the front clamping point stranded 95 ... 300 mm² ● at AWG cables for main contacts for box terminal using the front clamping point 3/0 ... 600 kcmil ● for main contacts for box terminal using the back clamping point solid 120 ... 240 mm² ● at AWG cables for main contacts for box terminal using the back clamping point 250 ... 500 kcmil ● for main contacts for box terminal using both clamping points solid min. 2x 70 mm², max. 2x 240 mm² ● for main contacts for box terminal using both clamping points finely stranded with core end processing min. 2x 50 mm², max. 2x 185 mm² ● for main contacts for box terminal using both clamping points finely stranded without core end processing min. 2x 50 mm², max. 2x 185 mm² ● for main contacts for box terminal using both clamping points stranded min. 2x 70 mm², max. 2x 240 mm² ● for main contacts for box terminal using the back clamping point finely stranded with core end processing 120 ... 185 mm² ● for main contacts for box terminal using the back clamping point finely stranded without core end processing 120 ... 185 mm² ● for main contacts for box terminal using the back clamping point stranded 120 ... 240 mm² type of connectable conductor cross-sections ● at AWG cables for main current circuit solid 2/0 ... 500 kcmil ● for DIN cable lug for main contacts stranded 50 ... 240 mm² ● for DIN cable lug for main contacts finely stranded 70 ... 240 mm² type of connectable conductor cross-sections ● for control circuit solid 2x (0.25 ... 1.5 mm²) ● for control circuit finely stranded with core end processing 2x (0.25 ... 1.5 mm²) ● at AWG cables for control circuit solid 2x (24 ... 16) ● at AWG cables for control circuit finely stranded with 2x (24 ... 16) 3RW50762AB15 Page 4/7 7/8/2022 Subject to change without notice © Copyright Siemens core end processing wire length ● between soft starter and motor maximum 800 m ● at the digital inputs at AC maximum 1 000 m tightening torque ● for main contacts with screw-type terminals 14 ... 24 N·m ● for auxiliary and control contacts with screw-type terminals 0.8 ... 1.2 N·m tightening torque [lbf·in] ● for main contacts with screw-type terminals 124 ... 210 lbf·in ● for auxiliary and control contacts with screw-type terminals 7 ... 10.3 lbf·in Ambient conditions installation altitude at height above sea level maximum 5 000 m; derating as of 1000 m, see Manual ambient temperature ● during operation -25 ... +60 °C; Please observe derating at temperatures of 40 °C or above ● during storage and transport -40 ... +80 °C environmental category ● during operation according to IEC 60721 3K6 (no ice formation, only occasional condensation), 3C3 (no salt mist), 3S2 (sand must not get into the devices), 3M6 ● during storage according to IEC 60721 1K6 (only occasional condensation), 1C2 (no salt mist), 1S2 (sand must not get inside the devices), 1M4 ● during transport according to IEC 60721 2K2, 2C1, 2S1, 2M2 (max. fall height 0.3 m) EMC emitted interference acc. to IEC 60947-4-2: Class A Communication/ Protocol communication module is supported ● PROFINET standard Yes ● EtherNet/IP Yes ● Modbus RTU Yes ● Modbus TCP Yes ● PROFIBUS Yes UL/CSA ratings manufacturer's article number ● of the fuse — usable for Standard Faults up to 575/600 V according to UL Type: Class L, max. 1600 A; Iq = 30 kA — usable for High Faults up to 575/600 V according to UL Type: Class L, max. 1200 A; Iq = 100 kA operating power [hp] for 3-phase motors ● at 200/208 V at 50 °C rated value 150 hp ● at 220/230 V at 50 °C rated value 150 hp ● at 460/480 V at 50 °C rated value 350 hp ● at 575/600 V at 50 °C rated value 450 hp Safety related data protection class IP on the front according to IEC 60529 IP00; IP20 with cover touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front with cover ATEX certificate of suitability ● ATEX Yes ● IECEx Yes hardware fault tolerance according to IEC 61508 relating to ATEX 0 PFDavg with low demand rate according to IEC 61508 relating to ATEX 0.09 PFHD with high demand rate according to EN 62061 relating to ATEX 9E-6 1/h Safety Integrity Level (SIL) according to IEC 61508 relating to ATEX SIL1 T1 value for proof test interval or service life according to IEC 61508 relating to ATEX 3y 3RW50762AB15 Page 5/7 7/8/2022 Subject to change without notice © Copyright Siemens Certificates/ approvals For use in hazardous locations General Product Approval Confirmation For use in hazardous locations Declaration of Conformity Test Certificates Marine / Shipping Type Test Certificates/Test Report other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RW5076-2AB15 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RW5076-2AB15 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RW5076-2AB15 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RW5076-2AB15&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RW5076-2AB15/char Characteristic: Installation altitude http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RW5076-2AB15&objecttype=14&gridview=view1 Simulation Tool for Soft Starters (STS) https://support.industry.siemens.com/cs/ww/en/view/101494917 last modified: 3RW50762AB15 Page 6/7 4/11/2022 7/8/2022 Subject to change without notice © Copyright Siemens 3RW50762AB15 Page 7/7 7/8/2022 Subject to change without notice © Copyright Siemens