3SE5112-1QV10

Data sheet 3SE5112-1QV10 Safety position switch with separate actuator Metal enclosure, 40 mm Device connection 1x (M20 x 1.5) Slow-action contacts 1 NO/2 NC with 2 LEDs, yellow/green 24 V DC 5 directions of approaches The matching separate actuator 3SE5000-0AV0. must be ordered separately product brand name SIRIUS product designation Mechanical safety switches product type designation 3SE5 manufacturer's article number ● of the optional actuators suitability for use safety switch 3SE5000-0AV01 standard actuator, 3SE5000-0AV02 actuator with vertical mounting, 3SE5000-0AV03 actuator with horizontal mounting, 3SE5000-0AV04 radius actuator left, 3SE5000-0AV05 universal actuator, 3SE5000-0AV06 radius actuator right, 3SE5000-0AV07 heavyduty actuator, 3SE5000-0AW11 plastic actuator, 3SE5000-0AW21 stainless steel actuator Yes General technical data product function positive opening Yes insulation voltage rated value 400 V degree of pollution class 3 surge voltage resistance rated value 0.8 kV protection class IP IP66/IP67 shock resistance ● acc. to IEC 60068-2-27 30g / 11 ms vibration resistance acc. to IEC 60068-2-6 0.35 mm/5g mechanical service life (switching cycles) typical 1 000 000 electrical endurance (switching cycles) with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 typical 1 000 000 Electrical operating cycles in one hour with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 6 000 thermal current 10 A material of the enclosure of the switch head metal reference code acc. to IEC 81346-2 B continuous current of the C characteristic MCB 1 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A; for a short-circuit current smaller than 400 A continuous current of the DIAZED fuse link gG 6 A; for a short-circuit current smaller than 400 A active principle mechanical repeat accuracy 0.05 mm minimum actuating force in directions of actuation 20 N length of the sensor 110 mm width of the sensor 40 mm design of the switching contact mechanical number of NC contacts for auxiliary contacts 2 3SE51121QV10 Page 1/2 12.22.2020 Subject to change without notice © Copyright Siemens number of NO contacts for auxiliary contacts 1 operational current at DC-13 ● at 24 V rated value 3A design of the interface for safety-related communication without Enclosure design of the housing block, narrow material of the enclosure metal coating of the enclosure cathodic immersion coating design of the housing acc. to standard Yes Drive Head design of the actuating element without design of the switching function positive opening circuit principle slow-action contacts number of switching contacts safety-related 2 Connections/ Terminals type of electrical connection screw-type terminals type of connectable conductor cross-sections ● solid 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● finely stranded with core end processing 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● at AWG cables solid 1x (20 ... 16), 2x (20 ... 18) ● at AWG cables stranded 1x (20 ... 16), 2x (20 ... 18) Safety related data B10 value with high demand rate acc. to SN 31920 1 000 000 proportion of dangerous failures with high demand rate acc. to SN 31920 20 % cable entry type 1x (M20 x 1.5) Communication/ Protocol design of the interface without Ambient conditions explosion protection category for dust none Supply voltage type of voltage of the supply voltage of the optional LED display DC supply voltage ● of LED 24 V Installation/ mounting/ dimensions mounting position any fastening method screw fixing Certificates/ approvals Functional Safety/Safety of Machinery General Product Approval Type Examination Certificate Declaration of Conformity Miscellaneous other Confirmation Further information 3SE51121QV10 Page 2/3 12.22.2020 Subject to change without notice © Copyright Siemens Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SE5112-1QV10 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SE5112-1QV10 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SE5112-1QV10 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SE5112-1QV10&lang=en 3SE51121QV10 Page 3/4 12.22.2020 Subject to change without notice © Copyright Siemens 3SE51121QV10 Page 4/5 12.22.2020 Subject to change without notice © Copyright Siemens last modified: 3SE51121QV10 Page 5/5 12/21/2020 12.22.2020 Subject to change without notice © Copyright Siemens