3SE51120CC02

Data sheet 3SE5112-0CC02 Position switch Metal enclosure 40 mm according to EN 50041 Device connection 1x (M20 x 1.5) 1 NO/1 NC quick action contacts Rounded plunger with 3 mm overtravel Stainless steel plunger product brand name SIRIUS product designation Mechanical position switches product type designation 3SE5 manufacturer's article number ● of the supplied basic switch 3SE5112-0CA00 ● of the supplied actuator head for position switches 3SE5000-0AC02 ● of the supplied switching contacts 3SE5000-0CA00 ● of the supplied empty enclosure with cover 3SE5112-0AA00 suitability for use safety switch Yes General technical data product function positive opening Yes insulation voltage rated value 400 V degree of pollution class 3 surge voltage resistance rated value 6 kV protection class IP IP66/IP67 shock resistance ● according to IEC 60068-2-27 30g / 11 ms vibration resistance according to IEC 60068-2-6 0.35 mm/5g mechanical service life (switching cycles) typical 15 000 000 electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 electrical endurance (switching cycles) with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 typical 10 000 000 Electrical operating cycles in one hour with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 6 000 thermal current 10 A material of the enclosure of the switch head metal reference code according to IEC 81346-2 B continuous current of the C characteristic MCB 1 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A; for a short-circuit current smaller than 400 A continuous current of the DIAZED fuse link gG 6A active principle mechanical repeat accuracy 0.05 mm Substance Prohibitance (Date) 07/01/2006 minimum actuating force in directions of actuation 20 N length of the sensor 103.5 mm width of the sensor 40 mm design of the switching contact mechanical operating frequency rated value 50 ... 60 Hz 3SE51120CC02 Page 1/3 7/7/2022 Subject to change without notice © Copyright Siemens number of NC contacts for auxiliary contacts 1 number of NO contacts for auxiliary contacts 1 operational current at AC-15 ● at 24 V rated value 6A ● at 125 V rated value 6A ● at 240 V rated value 6A ● at 400 V rated value 4A operational current at DC-13 ● at 24 V rated value 3A ● at 125 V rated value 0.55 A ● at 250 V rated value 0.27 A ● at 400 V rated value 0.12 A design of the interface for safety-related communication without Enclosure design of the housing block, narrow material of the enclosure metal coating of the enclosure cathodic dip coating design of the housing according to standard Yes Drive Head design of the actuating element Rounded plunger, high-grade steel plunger standard-compliant actuator head EN 50041, design B shape of the switch head rounded design of the switching function positive opening circuit principle snap-action contacts number of switching contacts safety-related 1 Connections/ Terminals type of electrical connection screw-type terminals type of connectable conductor cross-sections ● solid 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● finely stranded with core end processing 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● at AWG cables solid 1x (20 ... 16), 2x (20 ... 18) ● at AWG cables stranded 1x (20 ... 16), 2x (20 ... 18) cable entry type 1x (M20 x 1.5) Communication/ Protocol design of the interface without Ambient conditions ambient temperature ● during operation -25 ... +85 °C ● during storage -40 ... +90 °C explosion protection category for dust none Installation/ mounting/ dimensions mounting position any fastening method screw fixing Certificates/ approvals General Product Approval Confirmation Functional Safety/Safety of Machinery 3SE51120CC02 Page 2/3 Declaration of Conformity Test Certificates 7/7/2022 other Subject to change without notice © Copyright Siemens Type Examination Certificate Type Test Certificates/Test Report Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SE5112-0CC02 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SE5112-0CC02 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SE5112-0CC02 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SE5112-0CC02&lang=en last modified: 3SE51120CC02 Page 3/3 1/26/2022 7/7/2022 Subject to change without notice © Copyright Siemens