3SE52320HC051AB4

Data sheet 3SE5232-0HC05-1AB4 Position switch Plastic enclosure, 31 mm according to EN 50047 Control cabinet type 1 NO/1 NC snap-action contacts integrated (not replaceable) Rounded plunger Degree of protection IP40, with Self-sealing grommet Standard cover, turquoise With accessories: screws and mounting plate without locking sheet metal and seal product brand name SIRIUS product designation Mechanical position switches product type designation 3SE5 manufacturer's article number ● of the supplied basic switch 3SE5232-0HC05-1AB4 accessories included Mounting plate, screws suitability for use safety switch Yes General technical data product function positive opening Yes insulation voltage rated value 400 V degree of pollution class 3 surge voltage resistance rated value 6 kV protection class IP IP40 shock resistance ● acc. to IEC 60068-2-27 30g / 11 ms vibration resistance ● acc. to IEC 60068-2-6 0.35 mm/5g mechanical service life (switching cycles) typical 15 000 000 electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 electrical endurance (switching cycles) with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 typical 10 000 000 Electrical operating cycles in one hour with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 6 000 thermal current 10 A material of the enclosure of the switch head plastic reference code acc. to IEC 81346-2 B continuous current of the C characteristic MCB 1 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A; for a short-circuit current smaller than 400 A continuous current of the DIAZED fuse link gG 6A active principle mechanical repeat accuracy 0.05 mm minimum actuating force in directions of actuation 20 N length of the sensor 75.7 mm width of the sensor 31 mm design of the switching contact mechanical operating frequency rated value 50 ... 60 Hz 3SE52320HC051AB4 Page 1/2 12.19.2020 Subject to change without notice © Copyright Siemens number of NC contacts for auxiliary contacts 1 number of NO contacts for auxiliary contacts 1 operational current at AC-15 ● at 24 V rated value 6A ● at 120 V rated value 6A ● at 240 V rated value 6A ● at 400 V rated value 4A operational current at DC-13 ● at 24 V rated value 3A ● at 125 V rated value 0.55 A ● at 250 V rated value 0.27 A ● at 400 V rated value 0.12 A design of the interface for safety-related communication without Enclosure design of the housing block, narrow material of the enclosure plastic coating of the enclosure Other types design of the housing acc. to standard Yes Drive Head design of the actuating element Rounded plunger, Teflon plunger standard-compliant actuator head EN 50047, design B shape of the switch head rounded design of the switching function positive opening, integrated circuit principle snap-action contacts number of switching contacts safety-related 1 Connections/ Terminals type of electrical connection screw-type terminals type of connectable conductor cross-sections ● solid 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● finely stranded with core end processing 1x (0.5 ... 1.5 mm²), 2x (0.5 ... 0.75 mm²) ● at AWG cables solid 1x (20 ... 16), 2x (20 ... 18) ● at AWG cables stranded 1x (20 ... 16), 2x (20 ... 18) cable entry type 1x (M20 x 1.5) Communication/ Protocol design of the interface without Ambient conditions explosion protection category for dust none Installation/ mounting/ dimensions mounting position any fastening method screw fixing Certificates/ approvals Functional Safety/Safety of Machinery General Product Approval Type Examination Certificate Declaration of Conformity Miscellaneous 3SE52320HC051AB4 Page 2/3 Test Certificates Type Test Certificates/Test Report other Confirmation 12.19.2020 Subject to change without notice © Copyright Siemens Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SE5232-0HC05-1AB4 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SE5232-0HC05-1AB4 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SE5232-0HC05-1AB4 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SE5232-0HC05-1AB4&lang=en 3SE52320HC051AB4 Page 3/4 12.19.2020 Subject to change without notice © Copyright Siemens 3SE52320HC051AB4 Page 4/5 12.19.2020 Subject to change without notice © Copyright Siemens last modified: 3SE52320HC051AB4 Page 5/5 8/31/2020 12.19.2020 Subject to change without notice © Copyright Siemens