3SU11001HB201CJ0

Data sheet 3SU1100-1HB20-1CJ0 EMERGENCY STOP mushroom pushbutton, 22 mm, round, plastic, red, 40 mm, positive latching, acc. to EN ISO 13850, rotate-to-unlatch, with yellow backing plate, inscription: Arrêt d'urgence, with holder, 1 NC, screw terminal product brand name SIRIUS ACT product designation EMERGENCY STOP mushroom pushbuttons design of the product Complete unit product type designation 3SU1 product line Plastic, black, 22 mm manufacturer's article number ● of supplied contact module at position 1 3SU1400-1AA10-1CA0 ● of the supplied holder 3SU1500-0AA10-0AA0 ● of the supplied actuator 3SU1000-1HB20-0AA0 ● of supplied accessory 3SU1900-0BC31-0GQ0 Enclosure number of command points 1 Actuator design of the actuating element positive latching principle of operation of the actuating element latching product extension optional light source No color of the actuating element red material of the actuating element plastic shape of the actuating element round outer diameter of the actuating element 40 mm number of contact modules 1 type of unlocking device rotate-to-unlatch mechanism Front ring product component front ring No Holder material of the holder Plastic Display number of LED modules 0 General technical data product function ● positive opening Yes ● EMERGENCY OFF function Yes ● EMERGENCY STOP function Yes product component light source No insulation voltage rated value 500 V degree of pollution 3 type of voltage of the operating voltage AC/DC 3SU11001HB201CJ0 Page 1/2 12.19.2020 Subject to change without notice © Copyright Siemens surge voltage resistance rated value 6 kV protection class IP IP66, IP67, IP69(IP69K) ● of the terminal degree of protection NEMA rating IP20 1, 2, 3, 3R, 4, 4X, 12, 13 shock resistance ● acc. to IEC 60068-2-27 Sinusoidal half-wave 50g / 11 ms ● for railway applications acc. to DIN EN 61373 Category 1, Class B vibration resistance ● acc. to IEC 60068-2-6 10 ... 500 Hz: 5g ● for railway applications acc. to DIN EN 61373 Category 1, Class B operating frequency maximum 600 1/h mechanical service life (switching cycles) typical 300 000 electrical endurance (switching cycles) typical 300 000 thermal current 10 A reference code acc. to IEC 81346-2 S continuous current of the C characteristic MCB 10 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A continuous current of the DIAZED fuse link gG 10 A ● operating voltage at AC — at 50 Hz rated value 5 ... 500 V — at 60 Hz rated value 5 ... 500 V ● operating voltage at DC rated value 5 ... 500 V Power Electronics contact reliability One maloperation per 100 million (17 V, 5 mA), one maloperation per 10 million (5 V, 1 mA) Auxiliary circuit design of the contact of auxiliary contacts Silver alloy number of NC contacts for auxiliary contacts 1 number of NO contacts for auxiliary contacts 0 Connections/ Terminals type of electrical connection ● of modules and accessories Screw-type terminal type of connectable conductor cross-sections ● solid with core end processing 2x (0.5 ... 0.75 mm²) ● solid without core end processing 2x (1.0 ... 1.5 mm²) ● finely stranded with core end processing 2x (0.5 ... 1.5 mm²) ● finely stranded without core end processing 2x (1,0 ... 1,5 mm²) ● at AWG cables 2x (18 ... 14) tightening torque of the screws in the bracket ● tightening torque for auxiliary contacts with screwtype terminals 1 ... 1.2 N·m 0.8 ... 0.9 N·m Safety related data B10 value with high demand rate acc. to SN 31920 100 000 proportion of dangerous failures ● with low demand rate acc. to SN 31920 20 % ● with high demand rate acc. to SN 31920 20 % failure rate [FIT] with low demand rate acc. to SN 31920 100 FIT T1 value for proof test interval or service life acc. to IEC 61508 20 y Ambient conditions ● ambient temperature during operation -25 ... +70 °C ● ambient temperature during storage -40 ... +80 °C environmental category during operation acc. to IEC 60721 3M6, 3S2, 3B2, 3C3, 3K6 (with relative air humidity of 10 ... 95 %, no condensation in operation permitted for all devices behind front panel) Installation/ mounting/ dimensions fastening method ● of modules and accessories height 3SU11001HB201CJ0 Page 2/3 front panel mounting Front plate mounting 40 mm 12.19.2020 Subject to change without notice © Copyright Siemens width 30 mm shape of the installation opening round mounting diameter 22.3 mm positive tolerance of installation diameter 0.4 mm mounting height 46.4 mm installation width 75 mm installation depth 48.6 mm Accessories number of backing plates 1 marking of backing plate ARRET D'URGENCE color of backing plate Yellow Certificates/ approvals General Product Approval Declaration of Conformity Miscellaneous Test Certificates Special Test Certificate Marine / Shipping Marine / Shipping Type Test Certificates/Test Report other Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SU1100-1HB20-1CJ0 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SU1100-1HB20-1CJ0 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SU1100-1HB20-1CJ0 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SU1100-1HB20-1CJ0&lang=en 3SU11001HB201CJ0 Page 3/4 12.19.2020 Subject to change without notice © Copyright Siemens 3SU11001HB201CJ0 Page 4/5 12.19.2020 Subject to change without notice © Copyright Siemens last modified: 3SU11001HB201CJ0 Page 5/5 8/31/2020 12.19.2020 Subject to change without notice © Copyright Siemens