3SU11501HB201CG0

Data sheet 3SU1150-1HB20-1CG0 EMERGENCY STOP mushroom pushbutton, 22 mm, round, metal, shiny, red, 40 mm, positive latching, acc. to EN ISO 13850, rotate-to-unlatch, with yellow backing plate, inscription: EMERGENCY STOP, with holder, 1 NC, screw terminal product brand name SIRIUS ACT product designation EMERGENCY STOP mushroom pushbuttons design of the product Complete unit product type designation 3SU1 product line Metal, shiny, 22 mm manufacturer's article number ● of supplied contact module at position 1 3SU1400-1AA10-1CA0 ● of the supplied holder 3SU1550-0AA10-0AA0 ● of the supplied actuator 3SU1050-1HB20-0AA0 ● of supplied accessory 3SU1900-0BC31-0DA0 Enclosure number of command points 1 Actuator design of the actuating element positive latching principle of operation of the actuating element latching product extension optional light source No color of the actuating element red material of the actuating element plastic shape of the actuating element round outer diameter of the actuating element 40 mm number of contact modules 1 type of unlocking device rotate-to-unlatch mechanism Front ring product component front ring No Holder material of the holder Plastic Display number of LED modules 0 General technical data product function ● positive opening Yes ● EMERGENCY OFF function Yes ● EMERGENCY STOP function Yes product component light source No insulation voltage rated value 500 V degree of pollution 3 type of voltage of the operating voltage AC/DC surge voltage resistance rated value 6 kV protection class IP IP66, IP67, IP69(IP69K) 3SU11501HB201CG0 Page 1/3 7/5/2022 Subject to change without notice © Copyright Siemens ● of the terminal degree of protection NEMA rating IP20 1, 2, 3, 3R, 4, 4X, 12, 13 shock resistance ● according to IEC 60068-2-27 sinusoidal half-wave 15g / 11 ms vibration resistance ● according to IEC 60068-2-6 10 ... 500 Hz: 5g operating frequency maximum 600 1/h mechanical service life (switching cycles) typical 300 000 electrical endurance (switching cycles) typical 300 000 thermal current 10 A reference code according to IEC 81346-2 S continuous current of the C characteristic MCB 10 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A continuous current of the DIAZED fuse link gG 10 A Substance Prohibitance (Date) 10/01/2014 operating voltage ● at AC — at 50 Hz rated value 5 ... 500 V — at 60 Hz rated value 5 ... 500 V ● at DC rated value 5 ... 500 V Power Electronics contact reliability One maloperation per 100 million (17 V, 5 mA), one maloperation per 10 million (5 V, 1 mA) Auxiliary circuit design of the contact of auxiliary contacts Silver alloy number of NC contacts for auxiliary contacts 1 number of NO contacts for auxiliary contacts 0 Connections/ Terminals type of electrical connection ● of modules and accessories Screw-type terminal type of connectable conductor cross-sections ● solid with core end processing 2x (0.5 ... 0.75 mm²) ● solid without core end processing 2x (1.0 ... 1.5 mm²) ● finely stranded with core end processing 2x (0.5 ... 1.5 mm²) ● finely stranded without core end processing 2x (1,0 ... 1,5 mm²) ● at AWG cables 2x (18 ... 14) tightening torque of the screws in the bracket 1 ... 1.2 N·m tightening torque for auxiliary contacts with screw-type terminals 0.8 ... 0.9 N·m Safety related data B10 value with high demand rate according to SN 31920 100 000 proportion of dangerous failures ● with low demand rate according to SN 31920 20 % ● with high demand rate according to SN 31920 20 % failure rate [FIT] with low demand rate according to SN 31920 100 FIT Ambient conditions ambient temperature ● during operation -25 ... +70 °C ● during storage -40 ... +80 °C environmental category during operation according to IEC 60721 3M6, 3S2, 3B2, 3C3, 3K6 (with relative air humidity of 10 ... 95%, no condensation in operation permitted for all devices behind front panel) Installation/ mounting/ dimensions fastening method ● of modules and accessories front plate mounting Front plate mounting height 40 mm width 30 mm shape of the installation opening round mounting diameter 22.3 mm positive tolerance of installation diameter 0.4 mm 3SU11501HB201CG0 Page 2/3 7/5/2022 Subject to change without notice © Copyright Siemens mounting height 46.4 mm installation width 75 mm installation depth 48.6 mm Accessories number of backing plates 1 marking of backing plate EMERGENCY STOP color of backing plate Yellow Certificates/ approvals Declaration of Conformity General Product Approval Confirmation Declaration of Conformity Test Certificates Type Test Certificates/Test Report Marine / Shipping Marine / Shipping Special Test Certificate other Confirmation Environmental Confirmations Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SU1150-1HB20-1CG0 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SU1150-1HB20-1CG0 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SU1150-1HB20-1CG0 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SU1150-1HB20-1CG0&lang=en last modified: 3SU11501HB201CG0 Page 3/3 1/27/2022 7/5/2022 Subject to change without notice © Copyright Siemens