3SU1801-0NA00-2AC2

Data sheet 3SU1801-0NA00-2AC2 ENCLOSURE FOR COMMAND DEVICES, 22MM, ROUND, ENCLOSURE MATERIAL PLASTIC, ENCLOSURE TOP PART YELLOW, 1 COMMAND POINT PLASTIC, WITH PROTECTIVE COLLAR, A=EM. STOP MUSH. PUSHB. RED, 40MM, ROTATE TO UNLATCH, 1NC, SCREW TERMINAL, BASE MOUNTING, product brand name SIRIUS ACT Product designation Commanding and signaling devices Design of the product Enclosure Manufacturer article number ● of supplied contact module A1 = 3SU1400-2AA10-1CA0 ● of the supplied holder 3SU1500-0AA10-0AA0 ● of the supplied actuator A = 3SU1000-1HB20-0AA0 ● of supplied empty enclosure 3SU1801-0AA00-0AC2 Enclosure: Design of the housing with protective collar Shape of the enclosure front Square Material of the enclosure plastic Number of control points 1 Product component ● EMERGENCY STOP device No ● protective collar No Color ● of top part of the enclosure yellow Delivery state ● as a kit No ● pre-wired on strip terminal No Mounting type of the enclosure Vertical Actuator: Design of the operating mechanism Emergency stop mushroom pushbutton Suitability for use EMERGENCY OFF switch No 3SU1801-0NA00-2AC2 Page 1/4 28.04.2015 Changes preserved © Copyright Siemens AG Product feature ● lockout Product expansion optional Light source No No Color ● of the actuating element Red Material of the actuating element plastic Shape of the actuating element round Number of contact modules 1 Front ring: Product component front ring No Design of the front ring Standard Holder: Material of the holder Plastic Display: Number of LED modules 0 General technical data: Product function ● positive opening Yes ● EMERGENCY OFF function Yes ● EMERGENCY STOP function Yes Shock resistance ● acc. to IEC 60068-2-27 Sinusoidal half-wave 50 g / 11 ms Vibration resistance ● acc. to IEC 60068-2-6 Protection class IP 10 ... 500 Hz: 5g IP66, IP67, IP69(IP69K) Equipment marking ● acc. to DIN EN 61346-2 S ● acc. to DIN EN 81346-2 S Design of the fuse link for short-circuit protection of the auxiliary switch with type of assignment 1 required gG / Dz 10 A, quick-acting / Dz 10 A Continuous current of the C characteristic MCB 10 A Operating voltage ● with AC — at 50 Hz Rated value 5 ... 500 V — at 60 Hz Rated value 5 ... 500 V ● for DC Rated value — maximum 500 V — minimum 5 V Auxiliary circuit: Number of NC contacts 3SU1801-0NA00-2AC2 Page 2/4 28.04.2015 Changes preserved © Copyright Siemens AG ● for auxiliary contacts 1 Number of NO contacts ● for auxiliary contacts 0 Number of CO contacts ● for auxiliary contacts Design of the contact of the auxiliary contacts 0 Silver alloy Connections/ Terminals: Type of electrical connection ● of modules and accessories Type of electrical connection on enclosure Screw-type terminal Cable routing above and below, both 1 x M20 Tightening torque ● with screw-type terminals 0.8 ... 0.9 N·m Interfaces: Design of the interface ● for communication without Ambient conditions: Ambient temperature ● during operation -25 ... +70 °C ● during storage -40 ... +80 °C Installation/ mounting/ dimensions: Mounting type ● of modules and accessories Floor mounting Height 85 mm Width 85 mm Depth 112.5 mm Shape of the installation opening round Accessories: Number of labels 0 Marking of the name plate for command devices A=I Certificates/ approvals: Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) http://www.siemens.com/industrymall Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SU18010NA002AC2 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SU18010NA002AC2 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SU18010NA002AC2&lang=en 3SU1801-0NA00-2AC2 Page 3/4 28.04.2015 Changes preserved © Copyright Siemens AG 112.5 85 64 71 54 15.5 85 4.5 7 .1 NC -S NC .2 SIEMENS 3SU18.1.NA0_01_4_IEC.DXF Format / Size: Hybrid quer last modified: 3SU1801-0NA00-2AC2 Page 4/4 27.04.2015 28.04.2015 Changes preserved © Copyright Siemens AG