6AG11240GC014AX0

Data sheet 6AG1124-0GC01-4AX0 SIPLUS HMI TP700 COMFORT FOR medial stress with conformal coating based on 6AV2124-0GC01-0AX0 General information Product type designation TP700 Comfort Display Design of display TFT Screen diagonal 7 in Display width 152.4 mm Display height 91.4 mm Number of colors 16 777 216 Resolution (pixels) ● Horizontal image resolution 800 pixel ● Vertical image resolution 480 pixel Backlighting ● MTBF backlighting (at 25 °C) 80 000 h ● Backlight dimmable Yes; 0-100 % Control elements Keyboard fonts ● Function keys — Number of function keys 0 — Number of function keys with LEDs 0 ● Keys with LED No ● System keys No ● Numeric keyboard Yes; Onscreen keyboard ● alphanumeric keyboard Yes; Onscreen keyboard Touch operation ● Design as touch screen Yes Expansions for operator control of the process ● DP direct LEDs (LEDs as S7 output I/O) — F1...Fx 0 ● Direct keys (keys as S7 input I/O) — F1...Fx ● Direct keys (touch buttons as S7 input I/O) 0 32 Installation type/mounting Mounting position vertical Wall mounting/direct mounting No Mounting in portrait format possible Yes Mounting in landscape format possible Yes 6AG11240GC014AX0 Page 1/2 1.19.2021 Subject to change without notice © Copyright Siemens maximum permissible angle of inclination without external ventilation 35° Supply voltage Type of supply voltage DC Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Input current Current consumption (rated value) 0.5 A Starting current inrush I²t 0.5 A²·s Power Active power input, typ. 12 W Memory Flash Yes RAM Yes Memory available for user data 12 Mbyte Type of output Info LED No Power LED No Error LED No Acoustics ● Buzzer No ● Speaker Yes Time of day Clock ● Hardware clock (real-time) Yes ● Software clock No ● retentive Yes; Back-up duration typically 6 weeks ● synchronizable Yes Interfaces Number of industrial Ethernet interfaces 2 Number of RS 485 interfaces 1; RS 422 / 485 combined Number of RS 422 interfaces 1 Number of RS 232 interfaces 0 Number of USB interfaces 2; USB 2.0 ● USB Mini B 1; 5-pole Number of 20 mA interfaces (TTY) 0 Number of parallel interfaces 0 Number of other interfaces 0 Number of SD card slots 2 With software interfaces No Industrial Ethernet ● Industrial Ethernet status LED 2 ● Number of ports of the integrated switch 2 Protocols PROFINET Yes Supports protocol for PROFINET IO Yes IRT Yes; As of WinCC V12 PROFIBUS Yes MPI Yes Protocols (Ethernet) ● TCP/IP Yes ● DHCP Yes ● SNMP Yes ● DCP Yes ● LLDP Yes WEB characteristics 6AG11240GC014AX0 Page 2/3 1.19.2021 Subject to change without notice © Copyright Siemens ● HTTP Yes ● HTTPS No ● HTML Yes ● XML No ● CSS Yes ● Active X No ● JavaScript Yes ● Java VM No Redundancy mode Media redundancy — MRP Yes; As of WinCC V12 Further protocols ● CAN No ● EtherNet/IP Yes ● MODBUS Yes Interrupts/diagnostics/status information Diagnoses ● Diagnostic information readable Yes; S7 controller EMC Emission of radio interference acc. to EN 55 011 ● Limit class A, for use in industrial areas Yes ● Limit class B, for use in residential areas No Degree and class of protection NEMA (front) ● Enclosure Type 4 at the front Yes ● Enclosure Type 4x at the front Yes Ambient conditions Suited for indoor use Yes Suited for outdoor use No Ambient temperature during operation ● Operation (vertical installation) — For vertical installation, min. 0 °C; = Tmin — For vertical installation, max. 50 °C; = Tmax ● Operation (max. tilt angle) — At maximum tilt angle, min. 0 °C; = Tmin — At maximum tilt angle, min. 40 °C; = Tmax ● Operation (vertical installation, portrait format) — For vertical installation, min. 0 °C; = Tmin — For vertical installation, max. 40 °C; = Tmax ● Operation (max. tilt angle, portrait format) — At maximum tilt angle, min. 0 °C; = Tmin — At maximum tilt angle, min. 35 °C; = Tmax Ambient temperature during storage/transportation ● min. -20 °C ● max. 60 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) Resistance Coolants and lubricants — Resistant to commercially available coolants and lubricants Yes; Incl. diesel and oil droplets in the air Use in stationary industrial systems — to biologically active substances according to 6AG11240GC014AX0 Page 3/4 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of 1.19.2021 Subject to change without notice © Copyright Siemens EN 60721-3-3 fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust, * Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl. sand, dust; * Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Conformal coating ● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high reliability ● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Operating systems proprietary No pre-installed operating system ● Windows CE Yes Configuration Message indicator Yes Alarm system (incl. buffer and acknowledgment) Yes Process value display (output) Yes Process value default (input) possible Yes Recipe management Yes Configuration software ● STEP 7 Basic (TIA Portal) No ● STEP 7 Professional (TIA Portal) No ● WinCC flexible Compact No ● WinCC flexible Standard No ● WinCC flexible Advanced No ● WinCC Basic (TIA Portal) No ● WinCC Comfort (TIA Portal) Yes; from V11 ● WinCC Advanced (TIA Portal) Yes; from V11 ● WinCC Professional (TIA Portal) Yes; from V11 Languages Online languages ● Number of online/runtime languages 32 Project languages ● Languages per project 32 Functionality under WinCC (TIA Portal) Libraries Yes Applications/options ● Web browser Yes ● Pocket Word Yes 6AG11240GC014AX0 Page 4/5 1.19.2021 Subject to change without notice © Copyright Siemens ● Pocket Excel Yes ● PDF Viewer Yes ● Media Player Yes ● SIMATIC WinCC Sm@rtServer Yes ● SIMATIC WinCC Audit Yes Number of Visual Basic Scripts Yes Task planner ● time-controlled Yes ● task-controlled Yes Help system ● Number of characters per info text 70 Message system ● Number of alarm classes 32 ● Bit messages — Number of bit messages 4 000 ● Analog messages — Number of analog messages 200 ● S7 alarm number procedure Yes ● System messages HMI Yes ● System messages, other (SIMATIC S7, Sinumerik, Simotion, etc.) Yes ● Number of characters per message 80 ● Number of process values per message 8 ● Acknowledgment groups Yes ● Message indicator Yes ● Message buffer — Number of entries 1 024 — Circulating buffer Yes — retentive Yes — maintenance-free Yes Recipe management ● Number of recipes 300 ● Data records per recipe 500 ● Entries per data record 1 000 ● Size of internal recipe memory 2 Mbyte ● Recipe memory expandable Yes Variables ● Number of variables per device 2 048 ● Number of variables per screen 400 ● Limit values Yes ● Multiplexing Yes ● Structures Yes ● Arrays Yes Images ● Number of configurable images 500 ● Permanent window/default Yes ● Global image Yes ● Image selection by PLC Yes ● Image number in the PLC Yes Image objects ● Number of objects per image 400 ● Text fields Yes ● I/O fields Yes ● Graphic I/O fields (graphics list) Yes ● Symbolic I/O fields (text list) Yes ● Date/time fields Yes ● Switches Yes ● Buttons Yes ● Graphic display Yes 6AG11240GC014AX0 Page 5/6 1.19.2021 Subject to change without notice © Copyright Siemens ● Icons Yes ● Geometric objects Yes Complex image objects ● Number of complex objects per screen 20 ● Alarm view Yes ● Trend view Yes ● User view Yes ● Status/control Yes ● Sm@rtClient view Yes ● Recipe view Yes ● f(x) trend view Yes ● System diagnostics view Yes ● Media Player Yes ● Bar graphs Yes ● Sliders Yes ● Pointer instruments Yes ● Analog/digital clock Yes Lists ● Number of text lists per project 500 ● Number of entries per text list 500 ● Number of graphics lists per project 500 ● Number of entries per graphics list 500 Archiving ● Number of archives per device 50 ● Number of entries per archive 20 000 ● Message archive Yes ● Process value archive Yes ● Archiving methods — Sequential archive Yes — Short-term archive Yes ● Memory location — Memory card Yes — USB memory Yes — Ethernet Yes ● Data storage format — CSV Yes — TXT Yes — RDB Yes Security ● Number of user groups 50 ● Number of user rights 32 ● Number of users 50 ● Password export/import Yes ● SIMATIC Logon Yes Logging through printer ● Alarms Yes ● Report (shift log) Yes ● Hardcopy Yes ● Electronic print to file Yes; PDF, HTML Character sets ● Keyboard fonts — US English Yes Transfer (upload/download) ● MPI/PROFIBUS DP Yes ● USB Yes ● Ethernet Yes ● using external storage medium No Process coupling 6AG11240GC014AX0 Page 6/7 1.19.2021 Subject to change without notice © Copyright Siemens ● S7-1200 Yes ● S7-1500 Yes ● S7-200 Yes ● S7-300/400 Yes ● LOGO! Yes ● WinAC Yes ● SINUMERIK Yes; with SINUMERIK option package ● SIMOTION No; With WinCC, subsequent version ● Allen Bradley (EtherNet/IP) Yes ● Allen Bradley (DF1) Yes ● Mitsubishi (MC TCP/IP) Yes ● Mitsubishi (FX) Yes ● OMRON (FINS TCP) No ● OMRON (LINK/Multilink) Yes ● Modicon (Modbus TCP/IP) Yes ● Modicon (Modbus) Yes Service tools/configuration aids ● Backup/Restore manually Yes ● Backup/Restore automatically Yes ● Simulation Yes ● Device switchover Yes Peripherals/Options Printer Yes SIMATIC HMI MM memory card: Multi Media Card Yes SIMATIC HMI SD memory card: Secure Digital memory card Yes USB memory Yes Mechanics/material Enclosure material (front) ● Plastic No ● Aluminum Yes ● Stainless steel No Dimensions Width of the housing front 214 mm Height of housing front 158 mm Mounting cutout, width 197 mm Mounting cutout, height 141 mm Overall depth 63 mm Weights Weight without packaging 1.4 kg Weight incl. packaging 1.6 kg last modified: 1/16/2021 6AG11240GC014AX0 Page 7/7 1.19.2021 Subject to change without notice © Copyright Siemens