6EP1961-2BA41

Data sheet 6EP1961-2BA41 SITOP PSE200U/4X3-10A/SEO SITOP PSE200U 10 A selectivity module 4-channel input: 24 V DC/40 A output: 24 V DC/4x 10 A threshold adjustable 3-10 A with status message for each output input type of the power supply network Controlled DC voltage supply voltage at DC rated value 24 V input voltage at DC 22 ... 30 V overvoltage overload capability 35 V input current at rated input voltage 24 V rated value 40 A output voltage curve at output controlled DC voltage formula for output voltage Vin - approx. 0.2 V relative overall tolerance of the voltage note In accordance with the supplying input voltage number of outputs 4 output current up to 60 °C per output rated value 10 A Adjustable output current 3 ... 10 A type of response value setting via potentiometer response delay maximum 5s product feature parallel switching of outputs No type of outputs connection Simultaneous connection of all outputs after power up of the supply voltage > 20 V, delay time of 25 ms, 100 ms or adjustable "load optimised" via DIP switch for sequential connection power loss efficiency in percent 99 % power loss [W] at rated output voltage for rated value of the output current typical 10 W switch-off characteristic switching characteristic ● of the excess current Iout = 1.0 ...1.5 x set value, switch-off after approx. 5 s ● of the current limitation Iout = 1.5 x set value, switch-off after typ. 100 ms ● of the immediate switch-off Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms residual current at switch-off typical 1 mA design of the reset device/resetting mechanism via sensor per output remote reset function Non-electrically isolated 24 V input (signal level "high" at > 15 V) protection and monitoring fuse protection type at input 15 A per output (not accessible) display version for normal operation Three-color LED per output: green LED for "Output switched through"; yellow LED for "Output switched off manually"; red LED for "Output switched off due to overcurrent" design of the switching contact for signaling function Status signal output (pulse/pause signal, can be evaluated via Simatic function block) safety galvanic isolation between input and output at switch-off No standard for safety according to EN 60950-1 and EN 50178 operating resource protection class Class III 6EP19612BA41 Page 1/4 5/22/2024 Subject to change without notice © Copyright Siemens protection class IP IP20 standard ● for emitted interference EN 55022 Class B ● for interference immunity EN 61000-6-2 standards, specifications, approvals certificate of suitability ● CE marking Yes ● UL approval Yes; UL-Recognized (UL 2367) File E328600; cULus-Listed (UL 508, CSA C22.2 No. 107.1) File E197259 ● EAC approval Yes type of certification ● CB-certificate MTBF at 40 °C Yes 540 979 h standards, specifications, approvals hazardous environments certificate of suitability ● IECEx No ● ATEX No standards, specifications, approvals marine classification shipbuilding approval Yes Marine classification association ● American Bureau of Shipping Europe Ltd. (ABS) Yes ● Det Norske Veritas (DNV) Yes standards, specifications, approvals Environmental Product Declaration Environmental Product Declaration Yes Global Warming Potential [CO2 eq] ● total 322 kg ● during manufacturing 18.6 kg ● during operation 469.4 kg ● after end of life 0.3 kg ambient conditions ambient temperature ● during operation -25 ... +60 °C; with natural convection ● during transport -40 ... +85 °C ● during storage -40 ... +85 °C environmental category according to IEC 60721 Climate class 3K3, 5 … 95% no condensation connection method type of electrical connection screw terminal ● at input +24 V: 2 screw terminals for 0.5 ... 16 mm²; 0 V: 2 screw terminals for 0.5 ... 4 mm² ● at output Output 1 ... 4: 1 screw terminal each for 0.5 ... 4 mm² ● for auxiliary contacts Remote reset: 1 screw terminal for 0.5 ... 4 mm² ● for signaling contact 1 screw terminal for 0.5 ... 4 mm² mechanical data width × height × depth of the enclosure 72 × 80 × 72 mm installation width × mounting height 72 × 180 mm required spacing ● top 50 mm ● bottom 50 mm ● left 0 mm ● right 0 mm fastening method Snaps onto DIN rail EN 60715 35x7.5/15 ● standard rail mounting Yes ● S7 rail mounting No ● wall mounting No housing can be lined up Yes net weight 0.2 kg accessories mechanical accessories Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 further information internet links internet link ● to website: Industry Mall 6EP19612BA41 Page 2/4 https://mall.industry.siemens.com 5/22/2024 Subject to change without notice © Copyright Siemens ● to web page: selection aid TIA Selection Tool https://siemens.com/tst ● to website: Industrial communication http://www.siemens.com/simatic-net ● to website: CAx-Download-Manager http://www.siemens.com/cax ● to website: Industry Online Support https://support.industry.siemens.com additional information other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) security information security information Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Classifications Version Classification eClass 14 27-37-18-02 eClass 12 27-37-18-02 eClass 9.1 27-37-18-02 eClass 9 27-37-18-02 eClass 8 27-37-18-02 eClass 7.1 27-37-18-02 eClass 6 27-37-18-02 ETIM 9 EC001440 ETIM 8 EC001440 ETIM 7 EC001440 IDEA 4 4727 UNSPSC 15 39-12-15-21 Approvals Certificates General Product Approval Manufacturer Declaration Declaration of Conformity For use in hazardous locations General Product Approval Marine / Shipping Miscellaneous Environment 6EP19612BA41 Page 3/4 5/22/2024 Subject to change without notice © Copyright Siemens last modified: 6EP19612BA41 Page 4/4 5/22/2024 5/22/2024 Subject to change without notice © Copyright Siemens