6EP31330TA000AY0

Data sheet 6EP3133-0TA00-0AY0 SITOP PSU3400/DC/DC/24V/24V/5A SITOP PSU3400 24 V/5 A Stabilized power supply Input: 24 V DC (14…32 V) Output: 24 V DC/5 A Input Input ● Note DC voltage Startup as of 18 V, derating necessary for 14 ... 18 V DC supply voltage ● at DC 24 ... 24 V input voltage ● at DC 14 ... 32 V Wide-range input No Overvoltage resistance - Mains buffering at Vin = 24 V Mains buffering at Iout rated, min. 5 ms; at Vin = 24 V input current ● at rated input voltage 24 V 5.5 A Switch-on current limiting (+25 °C), max. 15 A I²t, max. 0.18 A²·s Built-in incoming fuse 25 A (not accessible), breaking capacity 300 A Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 16 A characteristic B or C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 1% Static mains compensation, approx. 0.1 % Static load balancing, approx. 0.3 % Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 15 mV Spikes peak-peak, max. (bandwidth: 20 MHz) 250 mV Spikes peak-peak, typ. (bandwidth: 20 MHz) 40 mV Adjustment range 24 ... 28 V product function output voltage adjustable Yes Output voltage setting via potentiometer Status display Green LED for 24 V OK On/off behavior No overshoot of Vout (soft start) Startup delay, max. 0.5 s Voltage rise, typ. 10 ms 6EP31330TA000AY0 Page 1/2 12.23.2020 Subject to change without notice © Copyright Siemens voltage increase time of the output voltage maximum 20 ms Rated current value Iout rated 5A Current range 0 ... 6 A ● Note 6 A up to +40°C; +60 ... +70 °C: Derating 2%/K supplied active power typical 130 W Parallel switching for enhanced performance Yes Numbers of parallel switchable units for enhanced performance 2 Efficiency Efficiency at Vout rated, Iout rated, approx. 93 % Power loss at Vout rated, Iout rated, approx. 10 W power loss [W] during no-load operation maximum 1.5 W Closed-loop control Dynamic mains compensation (Vin rated ±15 %), max. 0.3 % Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 2% Load step setting time 50 to 100%, typ. 1 ms Load step setting time 100 to 50%, typ. 1 ms Protection and monitoring Output overvoltage protection Ua < 35 V Current limitation, typ. 6.5 A property of the output short-circuit proof Yes Short-circuit protection Electronic shutdown, automatic restart Overload/short-circuit indicator Yellow LED overload Safety Primary/secondary isolation Yes galvanic isolation Safety extra low output voltage Vout according to EN 60950-1 Protection class Class III Degree of protection (EN 60529) IP20 Approvals CE mark Yes UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 Explosion protection - certificate of suitability NEC Class 2 No FM approval - CB approval Yes Marine approval ABS, DNV GL EMC Emitted interference EN 61000-6-3 Supply harmonics limitation not applicable Noise immunity EN 61000-6-2 environmental conditions ambient temperature ● during operation — Note -25 ... +70 °C with natural convection ● during transport -40 ... +85 °C ● during storage -40 ... +85 °C Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation Mechanics Connection technology screw-type terminals Connections ● Supply input L, N, FE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded ● Output +, -: 2 screw terminals each for 0.5 ... 2.5 mm² width of the enclosure 32 mm height of the enclosure 100 mm depth of the enclosure 100 mm required spacing ● top 6EP31330TA000AY0 Page 2/3 50 mm 12.23.2020 Subject to change without notice © Copyright Siemens ● bottom 50 mm ● left 0 mm ● right 0 mm Weight, approx. 0.32 kg product feature of the enclosure housing can be lined up Yes Installation Snaps onto DIN rail EN 60715 35x7.5/15 electrical accessories Buffer module MTBF at 40 °C 1 953 545 h other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) 6EP31330TA000AY0 Page 3/3 12.23.2020 Subject to change without notice © Copyright Siemens