6EP4135-0GB00-0AY0

Data sheet 6EP4135-0GB00-0AY0 SITOP UPS1100/Battery module/24V/12AH SITOP UPS1100 battery module with maintenance- free sealed lead-acid batteries for SITOP DC UPS modules 24 V DC 12 Ah electrical data end-of-charge voltage at DC ● at -10 °C recommended 28 V ● at 0 °C recommended 28 V ● at 10 °C recommended 27.8 V ● at 20 °C recommended 27.3 V ● at 30 °C recommended 26.8 V ● at 40 °C recommended 26.6 V ● at 50 °C recommended 26.3 V output battery capacity 12 A·h output current rated value 40 A output current in buffering mode maximum 40 A peak current 120 A; for 30 ms charging current maximum 3A output voltage at DC rated value 24 V interfaces communication function Yes protection and monitoring design of short-circuit protection Battery fuse 2x 25 A/32 V (solid-state circuitry blade-type fuse + support) design of the overload protection Valve control display version for normal operation LED green: Battery OK; LED flashing green: Error or warning; OFF: No communication safety operating resource protection class Class III protection class IP IP20 standards, specifications, approvals certificate of suitability ● CE marking Yes ● UL approval Yes; cURus-Recognized (UL 1778, CSA C22.2 No. 107.1), File E219627 ● CSA approval No ● EAC approval Yes standards, specifications, approvals hazardous environments certificate of suitability ● ATEX No ● cCSAus, Class 1, Division 2 No standards, specifications, approvals marine classification shipbuilding approval Yes Marine classification association ● American Bureau of Shipping Europe Ltd. (ABS) 6EP41350GB000AY0 Page 1/3 Yes 5/10/2024 Subject to change without notice © Copyright Siemens ● Det Norske Veritas (DNV) Yes standards, specifications, approvals Environmental Product Declaration Environmental Product Declaration Yes Global Warming Potential [CO2 eq] ● total 43.2 kg ● during manufacturing 21 kg ● during operation 18.4 kg ● after end of life 1.32 kg ambient conditions ambient condition For storage, mounting and operation of lead-acid batteries, the relevant DIN/VDE regulations or country-specific regulations (e.g. VDE 0510 Part 2/EN 50272-2) must be observed. You must ensure that the battery site is sufficiently ventilated. Possible sources of ignition must be at least 50 cm away. ambient temperature ● during operation -15 ... +50 °C ● during transport -20 ... +50 °C ● during storage -20 ... +40 °C relative temporary capacity loss at 20 °C in a month typical 3% service life of energy storage ● typical capacity falls to 80 % of original capacity (according to EUROBAT) ● at 20 °C typical 4a ● at 30 °C typical 2a ● at 40 °C typical 1a ● at 50 °C typical 0.5 a note Along with the storage and operating temperature, other factors such as the duration of the storage period and the charge status during storage have a decisive influence on the possible useful life. Batteries should therefore be stored as briefly as possible, always fully charged, and within the temperature range 0 to +20 °C. connection method type of electrical connection screw terminal ● for power supply unit 1 screw terminal each for 0.5 ... 16 mm² for + BAT and - BAT ● for control circuit and status message 1 screw terminal each for 0.14 ... 4 mm² mechanical data width × height × depth of the enclosure 253 × 186 × 110 mm installation width × mounting height 253 × 201 mm required spacing ● top 15 mm ● bottom 0 mm ● left 0 mm ● right 0 mm fastening method can be screwed onto flat surface (keyhole mounting for hooking in to M4 screws) ● standard rail mounting No ● S7 rail mounting No ● wall mounting Yes net weight 9.8 kg number of cells 12 accessories product component included Accessories pack with solid-state circuitry fuse 25 A further information internet links internet link ● to website: CAx-Download-Manager http://www.siemens.com/cax additional information other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) security information security information 6EP41350GB000AY0 Page 2/3 Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected 5/10/2024 Subject to change without notice © Copyright Siemens to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Classifications Version Classification 14 27-05-04-03 eClass 12 27-05-04-03 eClass 9.1 27-05-04-03 eClass 9 27-05-04-03 eClass 8 27-05-04-03 eClass 7.1 27-05-04-03 eClass 6 27-05-04-90 ETIM 9 EC000356 ETIM 8 EC000356 ETIM 7 EC000356 UNSPSC 15 26-11-17-01 eClass Approvals Certificates General Product Approval Manufacturer Declaration For use in hazardous locations For use in hazardous locations Declaration of Conformity Marine / Shipping CCC-Ex other Miscellaneous Dangerous Good Environment Dangerous Goods Information Environmental Confirmations Environment last modified: 6EP41350GB000AY0 Page 3/3 4/30/2024 5/10/2024 Subject to change without notice © Copyright Siemens